V i shay Int e rt e chn o l o g y, Inc . I INNOVAT AND TEC O L OGY NTCALUG03 Mini Lug Series N HN NTC THERMISTORS O 19 62-2012 Resistors - Fast Response Time < 4 s NTC Thermistors, Mini Lug Series Key Benefits • • • • Smallest mounting space of 65 mm2 (0.1 in2) only with tiny 5 mm ring tongue Short response time, < 4 s Lower thermal gradient, < 5 % of ΔT Space savings for limited surface areas APPLICATIONS • • • • Heatsink thermal management Power electronics thermal management Housing surface temperature measurement Pipe and conductor temperature measurement Resources • Datasheet: NTCALUG03 Mini Lug Series - http://www.vishay.com/doc?29114 • For technical questions contact [email protected] One of the World’s Largest Manufacturers of Discrete Semiconductors and Passive Components PRODUCT SHEET 1/2 VMN-PT0248-1203 This document is subject to change without notice. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 V i shay Int e rt e chn o l o g y, Inc . AND TEC O L OGY INNOVAT I N HN NTC THERMISTORS O Mini Lug Series NTCALUG03NTCALUG03 Mini Lug Series NTCALUG03 Mini Lug Series www.vishay.com www.vishay.com 1 2 962 -201 Vishay BCcomponents Vishay BCcomponents NTC Thermistors, NTC Thermistors,Mini MiniLug Lug Series Sensors NTC Thermistors, Mini Lug Sensors QUICK REFERENCE DATA QUICK REFERENCE DATA PARAMETER VALUE PARAMETER Resistance value at 25 °C Resistance value at 25 °C Tolerance on R25-value Tolerance on R25-value B25/85-value B25/85-value Tolerance on B25/85-value Tolerance on B25/85-value Operating temperature range: Operating temperature range: At zero dissipation At zero dissipation Response time Response time Thermal time constant τ Thermal time constant τ Dissipation factor δ Dissipation factor δ Maximum power dissipation at 25Maximum °C power dissipation at 25 °C withstanding Min. dielectric voltage terminals Min.between dielectric withstanding and lug voltage between terminals and category lug Climatic VALUE 10K to 47K 10K to 47K ± 2 to ± 3 ± 2 to ± 3 3740 to 3984 3740 to 3984 ± 0.5 to ± 1.5 ± 0.5 to ± 1.5 - 40 to + 125 - 40 to + 125 3.5 3.5 ≈5 ≈5 10 10 100 100 UNIT UNIT Ω Ω % % K K % % °C °C s s s s mW/K mW/K mW mW 1000 1000 VAC 40/125/56 40/125/56 - (LCT/UCT/days) Climatic category (LCT/UCT/days) Weight Weight without connector 0.5 g without connector 0.5 with connector 0.6 g with connector 0.6 Note • Other R25 values and tolerances available upon request Note • Other R25 values and tolerances available upon request VAC - g g • Fast time response for surface compared to industry standard NTC lug applications sensors compared to industry standard • Reduced thermal gradient, due toNTC the lug usesensors of • Reduced thermaland gradient, dueconductor, to the use of small dimensions nickel smallfordimensions nickel conductor, allowing an accurate and surface temperature allowing for an accurate surface temperature measurement • The measurement sensor is not suitable for being permanently The sensor is not or suitable in •contact with water liquidsfor being permanently in size contact with water liquids • Small connector andorsmall lug ring tongue terminal, • Smallfor size connectorsensing and small lug ring tongue allowing temperature at locations where terminal, only allowing temperature sensing at locations where only limited spacefor is available limited ZHR-2 space is available • Connector (optional) • Connector ZHR-2 (optional) • Compliant to RoHS Directive 2011/65/EU • Compliant to RoHS Directive 2011/65/EU APPLICATIONS APPLICATIONS Thermistors used for surface temperature sensing and Thermistors used for surface temperature sensing and control in: control in: • Computer equipment • Computer equipment • MOSFETS, IC’s, Power Electronics, heatsink temperature • MOSFETS, IC’s, heat-sink Power Electronics, control, LED emitter control heatsink temperature control,appliances LED emitter heat-sink control • Consumer • Consumer appliances • Industrial equipment • Industrial equipment • Automotive equipment • Automotive equipment DESCRIPTION DESCRIPTION Miniature insulated chip thermistor with a negative Miniaturecoefficient insulatedin accordance chip thermistor with a negative temperature with IEC 60539. The temperature coefficient in accordance with IEC 60539. The device has no marking. device has no marking. MOUNTING MOUNTING • The sensor can be mounted by means of a screw. For stud • The sensor canM2/American be mounted by means size, metric 2 mm stud #1 orof#2a screw. For stud 2 mm stud or #1crimped or #2 • The size, end metric wire can be M2/American soldered, welded to a • The end wire can be soldered, welded or crimped to a connector connector • Optional connector for Wire-to-Wire or Wire-to-Board • Optional connector for Wire-to-Wire or Wire-to-Board connections connections ELECTRICAL DATA AND ORDERING INFORMATION ELECTRICAL AND ORDERING INFORMATION R25-VALUE R25-TOL. BDATA 25/85-VALUE B25/85-TOL. SAP MATERIAL DESCRIPTION R25-VALUE(%) R25-TOL. B(K) 25/85-VALUE(±B%) 25/85-TOL. NUMBER SAP MATERIAL (kΩ) DESCRIPTION NUMBER 10 (kΩ) ± 3 (%) 3984 (K) 0.5 (± %) NTCALUG03A103H NTC Mini Lug 10K 3 % 3984 K 0.5 % NTCALUG03A103HNTC Mini Lug NTC 10K %% 3984 0.5 % 10 10 ±3 ±3 39843984 0.5 0.5 NTCALUG03A103HC 10KMini 3 %Lug 3984 K 30.5 withKconnector 10 10 10 10 Revision 09-Dec-11 Resistors - Fast Response Time < 4 s FEATURES FEATURES • Fast time response for surface applications 12 10 12 12 47 12 47 47 47 ±2 ±3 ±2 ±2 ±3 ±2 39843984 39843984 37403984 ±3 ±3 ±3 ±3 ±3 ±3 37403740 37403740 37403740 NTCALUG03A103HC NTC MiniMini LugLug 10K10K 3 %2 3984 K 0.5 % with 1 0.5 0.5 NTCALUG03A103G NTC % 3984 K 0.5 % connector TableTable 2 NTCALUG03A103GNTC Mini Lug NTC 10K 2 %%3984 0.5 % 2 0.5 0.5 NTCALUG03A103GC 10KMini 2 %Lug 3984 K 0.5 withKconnector TableTable 2 NTCALUG03A103GC NTC Mini Lug % 3984 0.5 % with connector 2 1.5 0.5 NTCALUG03A123H NTC10K Mini2Lug 12K K 3% TableTable 3 NTCALUG03A123H NTC 3% 3 1.5 1.5 NTCALUG03A123HC NTC Mini Lug 12KMini 3 %Lug with12K connector TableTable 3 NTCALUG03A123HC 1.5 1.5 NTCALUG03A473H 1.5 NTCALUG03A473H 1.5 NTCALUG03A473HC ±3 3740 1.5 NTCALUG03A473HC Note • Ordering Note information can be found on: www.vishay.com/doc?33036 • Ordering information can be found on: www.vishay.com/doc?33036 Revision: 09-Dec-11 R/T TABLER/T TABLE Table 1 1 TableTable 1 NTC Mini LugLug 12K47K 3 %3 with NTC Mini % connector NTC Mini Lug 47K 3% NTC Mini Lug 47 kΩ 3 % with connector NTC Mini Lug 47 kΩ 3 % with connector 3 TableTable 4 Table 4 Table 4 Table 4 Document Number: 29114 1 2/2 VMN-PT0248-1203 Document Number: 29114 1 For technical questions, contact: [email protected] For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT AREIS SUBJECT TOTO SPECIFIC SETDESCRIBED FORTH AT www.vishay.com/doc?91000 THIS DOCUMENT SUBJECT CHANGEDISCLAIMERS, WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN ANDARE SUBJECT THIS DOCUMENT This document is subject to change without notice. THE PRODUCTS HEREIN AND THIS DOCUMENT TO ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 PRODUCT SHEET Revision: 09-Dec-11