Circuit Breaker Accessories - ROCB C-Series C-Series REMOTE OPERATED CIRCUIT BREAKER The C-Series remote operated circuit breaker consists of a custom designed remote operated motor module (housed within a circuit breaker molding) coupled to a C-Series hydraulic-magnetic circuit breaker. The remote operated circuit breaker (ROCB) offers the convenience of remote ON, OFF, and Reset capability combined with the safety and accuracy of a standard magnetic current sensing device. This allows operation of the circuit breaker if required. Service, diagnostics, load shedding and power distribution control functions can now be performed in areas that were previously unattended, inaccessible. The ROCB module can be mounted on either side of the host breaker, while occupying only the width of a standard C-Series pole. Several interface methods are available. Product Highlights: ON-OFF and trip indication Load shedding Energy management Compact size Automatic reset capable Choice of interface styles Panel mounting Manual Operation Override Fits into industry standard cut-out www.carlingtech.com Voltage input: 12 VDC to 80 VDC Start current: < 1 amp Switching time: < 2 seconds Operating Temperature: -25˚C to 80˚C 1 Circuit Breaker Accessories - ROCB - Ordering Scheme To order a remote operated circuit breaker, add / plus the remote module part number to the end of the C-Series circuit breaker catalog number. ex. CA1BO24620121C/RB1110BU1C Match color & mounting inserts of breaker. / RB 1 1 10 B U 1 C 1 Series 2 Mounting Position 3 Interface 2 MOUNTING POSITION As viewed from back of breaker, line side up, pole 1 left. 1 Left Side 2 Right Side 7 Mounting Insert 8 Agency Approval 6 ACTUATOR COLOR T White U Black V Red W Yellow 3 INTERFACE 1 Flying Leads 2 Integral Connector 3 Flying Leads with 4 pin dual row connector (female) 4 Flying Leads with 4 pin dual row connector (male) 2 6 Actuator Color 5 VOLTAGE RATING A 12 VDC B 20-40 VDC C 41-80 VDC 1 SERIES RB 4 LEAD LENGTH 00 No Lead 01 1” 02 2” 03 3” 04 4” 05 5” 06 6” 07 7” 08 8” 09 9” 4 5 Lead Length Voltage Rating 10 11 12 13 14 15 16 17 18 19 20 10” 11” 12” 13” 14” 15” 16” 17” 18” 19” 20” 21 22 23 24 25 26 27 28 29 30 7 MOUNTING INSERT 1 6-32 x 0.195” 2 ISO M3 x 5mm 21” 22” 23” 24” 25” 26” 27” 28” 29” 30” 8 AGENCY APPROVAL C UL Recognized & CSA Accepted E G I UL 1500 Ignition Protected,UL Recognized & CSA Accepted J Notes: Integral and 4-pin dual row connectors not available with agency approval J or G: UL 489. www.carlingtech.com Circuit Breaker Accessories - Accessories Ordering Scheme Panel Hole Plug Threaded insert A & B-Series hole plugs are available 8 M 1 1 Accessory Code 2 Series C 3 Poles 1 2 1 4 Accessory Type 5 Actuator Type 6 Color 7 Finish 5 ACTUATOR TYPE & MOUNTING STYLE Actuator Type Mounting Style 1 M-Series Rocker Front Panel Snap-In 2 A & B-Series Rocker 6-32 Threaded Insert 3 A & B-Series Rocker ISO M3 Threaded Insert 6 C & D-Series Handle 6-32 Threaded Insert 7 C & D-Series Handle ISO M3 Threaded Insert 8 A, B, C & D-Series Handle Front Panel Snap-In 1 ACCESSORY CODE 8 2 SERIES A A & B-Series C C & D-Series M M-Series 3 POLES 1 One Pole A, B, C & D-Series Front Panel Snap-In Only 2 Multi-Pole Inner 3 Multi-Pole Outer 6 COLOR 1 White (M-Series only) 2 Black 7 Gray (M-Series only) 4 ACCESSORY TYPE C Panel Hole Plug 7 FINISH 1 Matte 2 Gloss ( A & B-Series only) A & B-Series PCB Socket The PCB socket is available with the A-Series Handle, DC up to 30 amps; A-Series Rocker, AC/DC up to 30 amps, and B-Series handle, AC/DC up to 30 amps. 8 A 1 1 Accessory Code 1 ACCESSORY CODE 8 2 SERIES A A & B-Series 3 POLES 1 One Pole 3 2 Series 3 Poles 1 2 1 5 Interface 5 Terminal 6 Color 4 INTERFACE WITH AUXILIARY SWITCH 1 Yes 2 No 5 AUXILIARY SWITCH TERMINAL TYPE 1 TAB, 0.110 Inches (Symmetrical terminal spacings) 3 None 6 COLOR B Black www.carlingtech.com C-Series, E-Series - Circuit Breaker Accessories - Ordering Scheme C-Series with Push-In Stud Terminals Removal Tool Circuit Breaker Removal Tool 8C1-X0-08-639 1 Part Number 1 PART NUMBER 8C1-X0-08-639 8C1-X0-09-593 Removal Tool for 6-32 inserts Removal Tool for M3 inserts C & E-Series Power Selector The number of lockout sliding handles provided is one less than the number 8 E 6 1 Accessory Code 1 ACCESSORY CODE 8 2 SERIES C C & D-Series E E-Series 3 POLES 4 4 Poles 6 6 Poles 91 9 Poles 2 Series 3 Poles B 4 Accessory Type C 3 1 5 Sections 6 Color 7 Style 5 SECTIONS & POLES PER SECTION Number of Sections Poles Per Section B Two Two C Two Three F Three Two G Three Three 6 COLOR 2 Black 3 Red 7 STYLE 1 Carling Logo 4 ACCESSORY TYPE B Power Lockout Kit Notes: 1 9 Pole option only available on E-Series www.carlingtech.com 4