4M-SERIES 4M-Series MINIATURE SLIDE SWITCHES The 4M-Series miniature slide switches offer a variety of ratings, circuits, contact materials, and terminal platings. With 14 termination choices and 8 actuator styles, this versatile switch adapts to a variety of applications, and is able to withstand temperatures from -30°C to +85°C. Product Highlights: Two or Three Position Circuitry 125/250VAC or up to 28VDC Available in Silver, Gold or Tin Plating Supplied in Bulk or Tape Reel UL and CSA Approvals Available Typical Applications: Consumer Electronics Instrumentation Computer Servers / Peripherals Test / Measurement Resources: Download 3D CAD Files IGS STP Carling Technologies, Inc. 60 Johnson Avenue, Plainville, CT 06062 Email: [email protected] Application Support: [email protected] Phone: 860.793.9281 Fax: 860.793.9231 www.carlingtech.com 2 | 4M-Series - General Specifications, 4M1 Ordering Scheme, Dimensional Specifications Electrical Contact Rating Electrical Life Contact Resistance Insulation Resistance Dielectric Strength refer to ordering scheme 30,000 make & break cycles @ full load 10 mΩ max. initial @ 2-4 VDC 100mA for both silver & gold plated contacts 1000 MΩ min. 1500 Volts RMS @ sea level 4M1 SSP 3 1 Series 3 CIRCUIT ( ) - momentary Switching Position: 1 3 SDP 1 2-1, 5-4 ON ON 4 ACTUATOR S1 .201” height S2 .301” height S3 .370” height S4 .140” height 5 ACTUATOR COLORS 1 White 2 Black 3 Red 4 Orange 5 Yellow S5 S6 S7 T1 3 2-3, 5,6 ON ON .053” height (for DPDT only) .488” height .311” height .209” height (for DPDT only) 6 7 8 9 Case Slide Handle Housing Terminal Seal 2 5 Actuator Color Dially phthalate (DAP) (UL 94V-0) Nylon Stainless Steel Epoxy M6 Q E 6 Termination 6 TERMINATION M1 Solder Lug M2 PCB M3 Quick Connect M5-1 Wire Wrap .750 M5-2 Wire Wrap .964 M5-3 Wire Wrap .425 M5-4 Wire Wrap 1.062 M6 PC Mount, 90° horizontal Double Pole 2 Connected Terminals NONE OFF Material 4 Actuator 1 SERIES 4M1 Miniature Slide Switch 2 POLES SSP Single Pole Operating Temperature -30°C to +85°C Solder Heat Resistance MIL-STD-202, Method 210 S1 3 Circuit 2 Pole Physical Green Blue Brown Gray 7 Contacts M61 M7 M71 VS2 VS3 N1 Snap-In, 90° PC Mount, 90° vertical Snap-In, 90° PC Mount, U bracket, .350 height PC Mount, U bracket, .575 height Solder Lug without mounting tabs 7 CONTACTS / TERMINALS Contact Material Terminal Plating Rating Approvals G silver 1 gold over silver 5A 125VAC or 28VDC , 2A 250VAC K gold 2 tin 3,5 0.4VA max 20V max (AC/DC) N/A tin 3,5 5A 125VAC or 28VDC , P silver 1 2A 250VAC 1 1 silver 5A 125VAC or 28VDC , Q silver 2A 250VAC 2 2 R gold gold 0.4VA max 20V max (AC/DC) N/A 8 EPOXY SEAL E Epoxy Seal O without Epoxy Seal Notes: 1 Movable contact & terminal platings: silver over copper alloy 2 Movable contact & terminal platings: gold over nickel over copper alloy 3 Terminals platings: tin over nickel over copper alloy, available with PC terminations only 4 Non-Black, white and red colors require a minimum order of 2500 pieces 5 Tin option available with PC type terminations only 4M1-Series Dimensional Specifications: in. [mm] Single Pole Double Pole Actuator Options S1 S2 8 Seal S3 S4 *Manufacturer reserves the right to change product specification without prior notice. Email: [email protected] Application Support: [email protected] Phone: (860) 793–9281 Fax: (860) 793–9231 www.carlingtech.com 4S-Series - Dimensional Specifications | 3 4M1-Series Dimensional Specifications: in. [mm] Actuator Options S1 S2 S3 S4 S5 S6 S7 T1 for DPDT only M1 Standard Solder Lug M2 PC Thru-Hole Termination Options M3 Quick Connect M5 Wire Wrap 'A' THK .030 [0.75] THK .030 [0.75] THK .030 [0.75] THK .030 [0.75] OPTION CODE DIM.'A' M5-1 .750 [19.05] M5-2 .964 [24.48] M5-3 .425 [10.80] M5-4 1.062 [26.97] * Standard with Mounting Tabs. N1 Single Pole Termination Options without Mounting Tabs N1 Double Pole M6 Single Pole P.C.MOUNTING M6 Double Pole P.C.MOUNTING Email: [email protected] Application Support: [email protected] Phone: (860) 793–9281 Fax: (860) 793–9231 www.carlingtech.com M6 Single Pole P.C.MOUNTING 4 | 4S-Series - Dimensional Specifications 4M1-Series Dimensional Specifications: in. [mm] M6 Pole M1 Double Standard Solder Lug M2 PC Thru-Hole Termination Options M3 Quick Connect M5 Wire WrapP.C.MOUNTING 'A' THK .030 [0.75] THK .030 [0.75] THK .030 [0.75] THK .030 [0.75] OPTION CODE DIM.'A' M5-1 .750 [19.05] M5-2 .964 [24.48] M5-3 .425 [10.80] M5-4 1.062 [26.97] * Standard with Mounting Tabs. M7 Single Pole N1 Single Pole Termination Options without Mounting Tabs P.C.MOUNTING Termination Options M7 Double Pole N1 Double Pole P.C.MOUNTING VS2 Single Pole M6 Single Pole P.C.MOUNTING P.C.MOUNTING M6 Double Pole P.C.MOUNTING VS2 Double Pole P.C.MOUNTING M7 Single Pole VS3 Single Pole P.C.MOUNTING P.C.MOUNTING Email: [email protected] Application Support: [email protected] Phone: (860) 793–9281 Fax: (860) 793–9231 www.carlingtech.com 4S-Series - Dimensional Specifications | 5 4M1-Series Dimensional Specifications: in. [mm] VS3 Single Pole M7 Double Pole VS2 Single Pole Termination Options P.C.MOUNTING P.C.MOUNTING P.C.MOUNTING VS3 Double Pole P.C.MOUNTING VS2 Double Pole P.C.MOUNTING VS3 Single Pole P.C.MOUNTING VS3 Double Pole P.C.MOUNTING Email: [email protected] Application Support: [email protected] Phone: (860) 793–9281 Fax: (860) 793–9231 www.carlingtech.com 6 | Notes Email: [email protected] Application Support: [email protected] Phone: (860) 793–9281 Fax: (860) 793–9231 www.carlingtech.com Reps & Contact | 7 Authorized Sales Representatives Click on the group name on the map below to find your local representative or visit www.carlingtech.com/findarep. « « Matera W. Canada Matera E. Canada MIDWEST DM Michigan TEMCO Northwest Alaska, Hawaii « NORTHERN Hanna Lind Ltd. Melody Emery Sierra Bridge Marketing Omega Limited Dy-tronix Inc. LD. Allen Norris DM Assoc East Pacent DM Assoc TSI North TSI WEST Signal Enterprises Luscombe Engineering Pinnacle Marketing Matrix DM Mexico South America Mexico « « Sunbelt Components SOUTHEAST ProRep Solutions LATIN AMERICA Americas Europe Middle East Africa Asia-Pacific Oceania About Carling Founded in 1920, Carling Technologies is a leading manufacturer of electrical and electronic switches and assemblies, circuit breakers, electronic controls, power distribution units, and multiplexed power distribution systems. With four ISO registered manufacturing facilities and technical sales offices worldwide, Carling Technologies Sales, Service and Engineering teams do much more than manufacture electrical components, they engineer powerful solutions! To learn more about Carling please visit www.carlingtech.com/company-profile. To view all of Carling’s environmental, quality, health & safety certifications please visit www.carlingtech.com/environmental-certifications Email: [email protected] Application Support: [email protected] Phone: (860) 793–9281 Fax: (860) 793–9231 www.carlingtech.com Worldwide Headquarters Carling Technologies, Inc. 60 Johnson Avenue, Plainville, CT 06062 Phone: 860.793.9281 Fax: 860.793.9231 Email: [email protected] Northern Region Sales Office: [email protected] Southeast Region Sales Office: [email protected] Midwest Region Sales Office: [email protected] West Region Sales Office: [email protected] Latin America Sales Office: [email protected] Asia-Pacific Headquarters Carling Technologies, Asia-Pacific Ltd., Kowloon, Hong Kong Phone: Int + 852-2737-2277 Fax: Int + 852-2736-9332 Email: [email protected] Shenzhen, China: [email protected] Shanghai, China: [email protected] Pune, India: [email protected] Kaohsiung, Taiwan: [email protected] Yokohama, Japan: [email protected] Europe | Middle East | Africa Headquarters Carling Technologies LTD 4 Airport Business Park, Exeter Airport, Clyst Honiton, Exeter, Devon, EX5 2UL, UK Phone: Int + 44 1392.364422 Fax: Int + 44 1392.364477 Email: [email protected] Germany: [email protected] France: [email protected] www.carlingtech.com REV_06_2016