1MS/1M1 1M-Series MINIATURE ROCKERS & PADDLES The 1M family of miniature rocker & paddle switches is composed of two switch series; the 1M1-Series miniature rocker and paddle switch, and the 1MS-Series sealed miniature rocker and paddle switch. Both products feature PC mounting and offer a variety of ratings, circuits, contact materials, terminal platings, rocker and paddle actuator styles and colors. 1M1-Series 1MS-Series Product Highlights: IP67 Sealing 9 Circuit Options Over 20 Termination Styles UL, CSA & cUL Approvals 1MS-Series Typical Applications: Instrumentation Test Equipment Telecommunications Networking Handheld Appliance Resources: Download 3D CAD Files IGS STP Carling Technologies, Inc. 60 Johnson Avenue, Plainville, CT 06062 Email: [email protected] Application Support: [email protected] Phone: 860.793.9281 Fax: 860.793.9231 www.carlingtech.com 2 | 1M-Series - General Specifications 1MS-Series 1M1-Series Sealed Miniature Rocker & Rocker Switch Electrical Contact Rating refer to ordering scheme Electrical Life 1MS-Series: 30,000 make & break cycles @ full load 1M1-Series: 50,000 make & break cycles @ full load Contact Resistance 10 mΩ max. initial @ 2-4 VDC 100mA for both silver & gold plated contacts Insulation Resistance 1000 MΩ min. Dielectric Strength 1500 Volts RMS @ sea level Physical Operating Temperature Index of Protection Solder Heat Resistance Actuator Travel -30°C to +85°C 1MS-Series: IP67 MIL-STD-202, Method 210 25° Miniature Rocker & Rocker Switch Material Case 1MS-Series: Glass filled nylon 6/6, flame retardant, heat stabilized (UL 94V-0) 1M1-Series: Dially phthalate (DAP) (UL 94V-0) Rocker/Paddle 1MS-Series: Nylon, black standard, internal o-ring sealed 1M1-Series: Nylon (UL 94V-0) Bushing 1MS-Series: Glass filled nylon 6/6, flame retardant, heat stabilized (UL 94V-0) 1M1-Series: Brass, nickel plated Housing 1MS-Series: Spring Steel 1M1-Series: Stainless Steel Actuator Pivot & Mounting Bracket 1MS-Series: Nylon (UL 94V-0) 1M1-Series: Stainless Steel Actuator Pivot Retainer 1MS-Series: Stainless Steel Switch Support Brass, tin plated Terminal Seal Epoxy *Manufacturer reserves the right to change product specification without prior notice. Email: [email protected] Application Support: [email protected] Phone: (860) 793–9281 Fax: (860) 793–9231 www.carlingtech.com 1M-Series - 1MS Ordering Scheme, 1M1 Ordering Scheme | 3 1MS SP 1 1 Series 2 Poles R6 3 Circuit 1 SERIES 1MS Sealed Miniature Rocker Switch 7 Contacts 8 Seal VS2 VS3 VS4 VS5 VS21 VS31 VS41 VS51 U2 U4 PC Mount, U bracket PC Mount, U bracket PC Mount, U bracket PC Mount, U bracket Snap-In, U bracket Snap-In, U bracket Snap-In, U bracket Snap-In, U bracket Vertical Mount, 3-Pole Snap-In, U bracket, 3-Pole See page 16-18 for dimensional specifications. 2 Connected Terminals NONE NONE OFF OFF OFF ON ON ON ON 3 2-1, 5-4, 8-7 ON (ON) ON (ON) (ON) ON (ON) (ON) (ON) 7 CONTACTS / TERMINALS Contact Material Terminal Plating Rating Approvals G silver 1 gold over silver 5A 125VAC or 28VDC, , IP67 2A 250VAC K gold 2,5 tin 4 0.4VA max 20V max (AC/DC) IP67 P silver 1,6 tin 4 5A 125VAC or 28VDC, , IP67 2A 250VAC R gold 2 gold 3 0.4VA max 20V max (AC/DC) IP67 8 EPOXY SEAL E Epoxy Seal *Center Position Connects 2-3, 5-4, 8-9 R4 R5 R6 R7 4 ACTUATOR STYLE R1 Standard Rocker R2 Standard Paddle R3 Medium Rocker 5 ACTUATOR COLOR 1 White 2 6 Termination 6 TERMINATION M1 Solder Lug M2 PCB M3 Quick Connect M5-1 Wire Wrap M5-2 Wire Wrap M5-3 Wire Wrap M5-4 Wire Wrap M6 PC Mount, 90˚ horizontal M7 PC Mount, 90˚ vertical 2 POLES SP Single pole - uses terminals 1, 2 & 3 DP Double pole uses terminals 1,2, 3, 4, 5 & 6 3P Three pole uses terminals 1,2, 3, 4, 5, 6, 7, 8 & 9 3 CIRCUIT ( ) - momentary Position:1 2-3, 5-6, 8-9 1ON 2ON 3ON 4(ON) 5ON 6 *ON 7 *(ON) 8 *ON 9 *OFF 2 M6 G E 5 Actuator Color 4 Actuator Style Black 3 O without Epoxy Seal Notes: Tin option not available with M1 and M3 terminals. 1 Movable contact and terminal platings: silver over copper alloy 2 Movable contact platings: gold over nickel over copper alloy 3 Terminal platings: gold over nickel over copper alloy 4 Terminal platings: tin over copper alloy 5 Terminal contact platings: gold over nickel alloy 6 Terminal contact platings: silver over nickel alloy Large Paddle Large Rocker Small Rocker Medium Paddle Red Black is standard. Other colors available, consult factory. 1M1 SP 1 1 Series 2 Poles 3 Circuit R8 2 4 Actuator Style 5 Actuator Color 1 SERIES 1M1 Miniature Rocker Switch 2 POLES SP Single pole - uses terminals 1, 2 & 3 DP Double pole uses terminals 1,2, 3, 4, 5 & 6 3P Three pole uses terminals 1,2, 3, 4, 5, 6, 7, 8 & 9 4P Four pole uses terminals 1,2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12 3 CIRCUIT ( ) - momentary Position:1 2-3, 5-6, 8-9, 11-12 1ON 2ON 3ON 4(ON) 5ON 6 1 ON 7 1 (ON) 8 1 ON 9 2 NONE 4 ACTUATOR STYLE R1 Standard Rocker R2 Standard Paddle R3 Medium Rocker R4 Large Paddle M6 Q E 6 Frame Color 7 Termination 7 TERMINATION M1 Solder Lug M2 PCB M3 Quick Connect M5-1 Wire Wrap M5-2 Wire Wrap M5-3 Wire Wrap M5-4 Wire Wrap M6 PC Mount, 90˚ horizontal M7 PC Mount, 90˚ vertical VS2 PC Mount, U bracket 8 Contacts 9 Seal VS3 PC Mount, U bracket VS4 PC Mount, U bracket VS5 PC Mount, U bracket M61 Snap-In, U bracket, 90° horizontal M71 Snap-In, U bracket, 90° vertical VS21 Snap-In, U bracket VS31 Snap-In, U bracket VS41 Snap-In, U bracket VS51 Snap-In, U bracket U4 Snap-In, U bracket, 3-Pole See page 21-23 for dimensional specifications. 2 Connected Terminals NONE NONE OFF OFF OFF ON ON ON ON R5 R6 R7 R8 R9 3 2-1, 5-4, 8-7, 11-10 ON (ON) ON (ON) (ON) ON (ON) (ON) (ON) Large rocker Rocker & frame Paddle & frame Rocker without frame Paddle without frame 5 ACTUATOR COLOR / 6 FRAME COLOR 0 No Frame* 2 Black 1 White 3 Red Black is standard. Other colors available, consult factory. *Actuator style R8 or R9 only. 8 CONTACTS / TERMINALS Contact Material Terminal Plating Rating Approvals G silver 3 gold over silver 5A 125VAC or 28VDC, , 2A 250VAC K gold 4,7 tin 6 0.4VA max 20V max (AC/DC) N/A P silver 3,8 tin 6 5A 125VAC or 28VDC, , 2A 250VAC 3 3 Q silver silver 5A 125VAC or 28VDC, , 2A 250VAC R gold 4 gold 5 0.4VA max 20V max (AC/DC) N/A 9 EPOXY SEAL E Epoxy Seal O without Epoxy Seal Notes: Tin option not available with M1 and M3 terminals. 1 Double-Pole and Four-Pole only. Center position connects 2-3, 5-4, 8-9, 11-10 2 Double-Pole only 3 Movable contact and terminal platings: silver over copper alloy 4 Movable contact platings: gold over nickel over copper alloy 5 Terminal platings: gold over nickel over copper alloy 6 Terminal platings: tin over copper alloy 7 Terminal contact platings: gold over nickel alloy 8 Terminal contact platings: silver over nickel alloy Email: [email protected] Application Support: [email protected] Phone: (860) 793–9281 Fax: (860) 793–9231 www.carlingtech.com 4 | 1M-Series - 1MS-Series Dimensional Specifications 1MS-Series Dimensional Specifications: in. [mm] Single Pole EPOXY SEAL 3 2 1 Double Pole EPOXY SEAL 6 3 5 2 4 1 Three Pole EPOXY SEAL 8 9 7 R1 5 6 3 2 4 1 Actuator Options for Panel Rear Mount R2 R3 Email: [email protected] Application Support: [email protected] Phone: (860) 793–9281 Fax: (860) 793–9231 www.carlingtech.com 1M-Series - 1MS-Series Dimensional Specifications | 5 1MS-Series Dimensional Specifications: in. [mm] R4 Actuator Options for Panel Rear Mount R5 R6 R1 R7 Actuator Options for PC Mount R2 R3 R4 R5 R6 Email: [email protected] Application Support: [email protected] Phone: (860) 793–9281 Fax: (860) 793–9231 www.carlingtech.com 6 | 1M-Series - 1MS-Series Dimensional Specifications 1MS-Series Dimensional Specifications: in. [mm] Actuator Options for PC Mount R7 Termination Options M1 Standard Solder Lug EPOXY SEAL THK .030 [0.75] M2 PC Thru-Hole EPOXY SEAL THK .030 [0.75] M3 Quick Connect M5 Wire Wrap EPOXY SEAL EPOXY SEAL OPTION CODE DIM.'A' M5-1 .711 [18.05] M5-2 .924 [23.48] M5-3 .386 [9.80] M5-4 1.022 [25.97] THK .030 [0.75] THK .030 [0.75] M6 Single Pole P.C.MOUNTING EPOXY SEAL M6 Double Pole M6 Three Pole P.C.MOUNTING EPOXY SEAL P.C.MOUNTING EPOXY SEAL 8 9 7 5 6 4 2 1 M7 Single Pole 3 P.C.MOUNTING EPOXY SEAL 3 2 1 Email: [email protected] Application Support: [email protected] Phone: (860) 793–9281 Fax: (860) 793–9231 www.carlingtech.com 1M-Series - 1MS-Series Dimensional Specifications | 7 1MS-Series Dimensional Specifications: in. [mm] Termination Options M7 Double Pole P.C.MOUNTING EPOXY SEAL M7 Three Pole 6 3 5 2 4 1 P.C.MOUNTING EPOXY SEAL 8 9 5 7 6 4 2 3 1 VS2-VS3 Single Pole P.C.MOUNTING OPTION CODE DIM.'A' VS2 .461 [11.70] VS3 .630 [16.00] EPOXY SEAL 1 2 3 VS2-VS3 Double Pole P.C.MOUNTING 'A' OPTION CODE DIM.'A' VS2 .461 [11.70] VS3 .630 [16.00] EPOXY SEAL 4 5 6 U2-VS3 Three Pole P.C.MOUNTING 'A' OPTION CODE DIM.'A' U2 .551 [14.00] VS3 .630 [16.00] EPOXY SEAL 7 8 9 Email: [email protected] Application Support: [email protected] Phone: (860) 793–9281 Fax: (860) 793–9231 www.carlingtech.com 8 | 1M-Series - 1MS-Series Dimensional Specifications 1MS-Series Dimensional Specifications: in. [mm] Termination Options VS4-VS5 Single Pole P.C.MOUNTING 'A' EPOXY SEAL 1 2 OPTION CODE DIM.'A' VS4 .461 [11.70] VS5 .630 [16.00] 3 VS4-VS5 Double Pole P.C.MOUNTING 'A' EPOXY SEAL 4 5 OPTION CODE DIM.'A' VS4 .461 [11.70] VS5 .630 [16.00] 6 U4-VS5 Three Pole P.C.MOUNTING 'A' EPOXY SEAL OPTION CODE DIM.'A' U4 .551 [14.00] VS5 .630 [16.00] Snap-In Termination Options M61 VS21, VS31 VS41, VS51 * PC Mounting for M61, M71, VS21, VS31, VS41, VS51 refer to M6, M7, VS2, VS3, VS4, VS5 respectively. Email: [email protected] Application Support: [email protected] Phone: (860) 793–9281 Fax: (860) 793–9231 www.carlingtech.com | 9 1M-Series - 1M1-Series Dimensional Specifications 1M1-Series Dimensional Specifications: in. [mm] Single Pole Double Pole Three Pole Four Pole 9 8 7 R1 6 5 3 2 4 1 Actuator Options for Panel Rear Mount R2 R3 R4 Email: [email protected] Application Support: [email protected] Phone: (860) 793–9281 Fax: (860) 793–9231 www.carlingtech.com 10 | 1M-Series - 1M1-Series Dimensional Specifications 1M1-Series Dimensional Specifications: in. [mm] Actuator Options for Panel Rear Mount R5 Actuator Options for Snap-In Mount R6 R6 WITHOUT FRAME PANEL MOUNTING PANEL THICKNESS TO MAX. TYP. * * Increase this dimension to .620/.625 [15.75/15.88] for .091/.125 [2.31/3.18] thk. panels. R7 R7 WITHOUT FRAME PANEL MOUNTING MAX. TYP. * TO PANEL THICKNESS * Increase this dimension to .620/.625 [15.75/15.88] for .091/.125 [2.31/3.18] thk. panels. Actuator Options for PC Mount R1 R2 R3 R4 Email: [email protected] Application Support: [email protected] Phone: (860) 793–9281 Fax: (860) 793–9231 www.carlingtech.com 1M-Series - 1M1-Series Dimensional Specifications | 11 1M1-Series Dimensional Specifications: in. [mm] Actuator Options for PC Mount R6 R5 R7 Termination Options M1 Standard Solder Lug M2 PC Thru-Hole M3 Quick Connect M5 Wire Wrap 'A' THK .030 [0.75] THK .030 [0.75] THK .030 [0.75] OPTION CODE DIM.'A' M5-1 .750 [19.05] M5-2 .964 [24.48] M5-3 .425 [10.80] M5-4 1.062 [26.97] THK .030 [0.75] M6 Single Pole P.C.MOUNTING M6 Double Pole P.C.MOUNTING M7 Single Pole P.C.MOUNTING Email: [email protected] Application Support: [email protected] Phone: (860) 793–9281 Fax: (860) 793–9231 www.carlingtech.com 12 | 1M-Series - 1M1-Series Dimensional Specifications 1M1-Series Dimensional Specifications: in. [mm] Termination Options P.C.MOUNTING M7 Double Pole M7 Three Pole P.C.MOUNTING M7 Four Pole P.C.MOUNTING 12 11 9 8 6 5 3 2 10 7 4 1 VS2-VS3 Single Pole 'A' P.C.MOUNTING OPTION CODE DIM.'A' VS2 .461 [11.70] VS3 .630 [16.00] VS2-VS3 Double Pole 'A' P.C.MOUNTING OPTION CODE DIM.'A' VS2 .461 [11.70] VS3 .630 [16.00] Email: [email protected] Application Support: [email protected] Phone: (860) 793–9281 Fax: (860) 793–9231 www.carlingtech.com | 13 1M-Series - 1M1-Series Dimensional Specifications 1M1-Series Dimensional Specifications: in. [mm] Termination Options VS4-VS5 Single Pole P.C.MOUNTING OPTION CODE DIM.'A' VS4 .461 [11.70] VS5 .630 [16.00] OPTION CODE DIM.'A' VS4 .461 [11.70] VS5 .630 [16.00] 'A' VS4-VS5 Double Pole P.C.MOUNTING 'A' U4-VS5 Three Pole P.C.MOUNTING .190 [4.83] EPOXY SEAL OPTION CODE DIM.'A' U4 .551 [14.00] VS5 .630 [16.00] 'A' Snap-In Termination Options M61 VS21, VS31 VS41, VS51 * PC Mounting for M61, VS21, VS31, VS41, VS51 refer to M6, VS2, VS3, VS4, VS5 respectively. Email: [email protected] Application Support: [email protected] Phone: (860) 793–9281 Fax: (860) 793–9231 www.carlingtech.com 14 | Notes Email: [email protected] Application Support: [email protected] Phone: (860) 793–9281 Fax: (860) 793–9231 www.carlingtech.com Reps & Contact | 15 Authorized Sales Representatives Click on the group name on the map below to find your local representative or visit www.carlingtech.com/findarep. « « Matera W. Canada Matera E. Canada MIDWEST DM Michigan TEMCO Northwest Alaska, Hawaii « NORTHERN Hanna Lind Ltd. Melody Emery Sierra Bridge Marketing Omega Limited Dy-tronix Inc. LD. Allen Norris DM Assoc East Pacent DM Assoc TSI North TSI WEST Signal Enterprises Luscombe Engineering Pinnacle Marketing Matrix DM Mexico South America Mexico « « Sunbelt Components SOUTHEAST ProRep Solutions LATIN AMERICA Americas Europe Middle East Africa Asia-Pacific Oceania About Carling Founded in 1920, Carling Technologies is a leading manufacturer of electrical and electronic switches and assemblies, circuit breakers, electronic controls, power distribution units, and multiplexed power distribution systems. With four ISO registered manufacturing facilities and technical sales offices worldwide, Carling Technologies Sales, Service and Engineering teams do much more than manufacture electrical components, they engineer powerful solutions! To learn more about Carling please visit www.carlingtech.com/company-profile. To view all of Carling’s environmental, quality, health & safety certifications please visit www.carlingtech.com/environmental-certifications Email: [email protected] Application Support: [email protected] Phone: (860) 793–9281 Fax: (860) 793–9231 www.carlingtech.com Worldwide Headquarters Carling Technologies, Inc. 60 Johnson Avenue, Plainville, CT 06062 Phone: 860.793.9281 Fax: 860.793.9231 Email: [email protected] Northern Region Sales Office: [email protected] Southeast Region Sales Office: [email protected] Midwest Region Sales Office: [email protected] West Region Sales Office: [email protected] Latin America Sales Office: [email protected] Asia-Pacific Headquarters Carling Technologies, Asia-Pacific Ltd., Kowloon, Hong Kong Phone: Int + 852-2737-2277 Fax: Int + 852-2736-9332 Email: [email protected] Shenzhen, China: [email protected] Shanghai, China: [email protected] Pune, India: [email protected] Kaohsiung, Taiwan: [email protected] Yokohama, Japan: [email protected] Europe | Middle East | Africa Headquarters Carling Technologies LTD 4 Airport Business Park, Exeter Airport, Clyst Honiton, Exeter, Devon, EX5 2UL, UK Phone: Int + 44 1392.364422 Fax: Int + 44 1392.364477 Email: [email protected] Germany: [email protected] France: [email protected] www.carlingtech.com REV_06_2016