2M-Series 2M1H/2MS/2M1 MINIATURE TOGGLES The 2M family of miniature toggle switches is composed of three switch series; the 2M1-Series miniature toggle switch, the 2MS-Series sealed miniature toggle switch, and the 2M1H-Series premium sealed miniature toggle switch. These series all feature PC mounting and offer a variety of ratings, circuits, contact materials, terminal platings, toggle styles and lengths, and optional color caps. 2MS-Series 2M1H-Series Product Highlights: IP67 Sealing 8 Single and Double Pole Circuits Long, Short and Flatted Bushing Options Large Variety of Termination Options Available Gold, Silver and Tin Platings UL Approved Sleek Black Finish 2M1-Series Typical Applications: Telecommunications Instrumentation Networking Medical Equipment Military Communications Resources: Download 3D CAD Files IGS STP Carling Technologies, Inc. 60 Johnson Avenue, Plainville, CT 06062 Email: [email protected] Application Support: [email protected] Phone: 860.793.9281 Fax: 860.793.9231 www.carlingtech.com 2 | 2M-Series - General Specifications, 2M1H Ordering Scheme 2M1H-Series 2MS-Series Premium Sealed Miniature Toggle Switch Electrical Contact Rating refer to ordering scheme Electrical Life 50,000 make & break cycles @ full load Contact Resistance 10 mΩ max. initial @ 2-4 VDC 100mA for both silver & gold plated contacts Insulation Resistance 1000 MΩ min. Dielectric Strength 1500 Volts RMS @ sea level Physical Operating Temperature Index of Protection Solder Heat Resistance Actuator Travel -30°C to +85°C 2M1H-Series: IP67 2MS-Series: IP67 MIL-STD-202, Method 210 25° 2M1H 1 Series DP1 2 Pole / Circuit 2 Connected Terminals NONE NONE OFF OFF OFF NONE NONE OFF OFF OFF ON ON ON Case 2M1H-Series & 2M1-Series: Dially phthalate (DAP) (UL 94V-0) 2MS-Series: Glass filled nylon 6/6, flame retardant, heat stabilized (UL 94V-0) Toggle 2M1H-Series: Brass, black finish with o-ring seal 2MS-Series: Brass, chrome plated, internal o-ring sealed 2M1-Series: Brass, chrome plated Bushing 2M1H-Series: Brass, black finish with o-ring seal 2MS-Series: Glass filled nylon 6/6, flame retardant, heat stabilized (UL 94V-0) 2M1-Series: Brass, nickel plated Housing Stainless Steel Bracket 2MS-Series: Nylon (UL 94V-0) 2M1-Series: Stainless Steel Actuator Pivot Retainer 2MS-Series: Stainless Steel Switch Support Brass, tin plated Terminal Seal Epoxy BJ 3 Actuator Style 4 Bushing 5 TERMINATION 7 M1 Solder Lug M2 PCB M3 Quick Connect 3 2-1, 5-4 ON (ON) ON (ON) (ON) ON (ON) ON (ON) (ON) ON (ON) (ON) *Center position connects 2-3, 5-4 3 ACTUATOR STYLE TJ .709” [18 mm] length TK .512” [13.00 mm] length 4 BUSHING BJ .429” [10.90 mm] threaded, length BK .386” [9.80 mm] threaded, flat Miniature Toggle Switch Material TJ 1 SERIES 2M1H Premium Sealed Miniature Toggle Switch 2 POLE / CIRCUIT ( ) - momentary Position:1 2-3, 5-6 SP1ON SP2ON SP3ON SP4(ON) SP5ON DP1ON DP2ON DP3ON DP4(ON) DP5ON DP6 *ON DP7 *(ON) DP8 *ON 2M1-Series Sealed Miniature Toggle Switch M2 R E 5 Termination M5-1 M5-2 M5-3 M5-4 6 Contacts 7 Seal Wire Wrap, .750” [19.05mm] length Wire Wrap, .964” [24.48mm] length Wire Wrap, .425” [10.80mm] length Wire Wrap, 1.062” [25.97mm] length 6 CONTACTS / TERMINALS Contact Material Terminal Plating Rating Approvals G silver 1 gold over silver 5A 125VAC or 28VDC, , IP67 2A 250VAC 2,5 4,7 K gold tin 0.4VA max 20V max (AC/DC) IP67 P silver 1,6 tin 4,7 5A 125VAC or 28VDC, , IP67 2A 250VAC 1 1 Q silver silver 5A 125VAC or 28VDC, , IP67 2A 250VAC R gold 2 gold 3 0.4VA max 20V max (AC/DC) IP67 7 EPOXY SEAL E Epoxy Seal Notes: Switches supplied with (1) 2M1-HDW4 hex nut and (1) WCP-0872 O-Ring 1 Movable contact and terminal platings: silver over copper alloy 2 Movable contact and terminal platings: gold over nickel over copper alloy 3 Terminal platings: gold over nickel over copper alloy 4 Terminal platings: tin over copper alloy 5 Terminal contact platings: gold over nickel alloy 6 Terminal contact platings: silver over nickel alloy 7 Tin option not available with M1 & M3 terminations. *Manufacturer reserves the right to change product specification without prior notice. Email: [email protected] Application Support: [email protected] Phone: (860) 793–9281 Fax: (860) 793–9231 www.carlingtech.com 2M-Series - 2MS Ordering Scheme, 2M1 Ordering Scheme | 3 2MS 1 Series WSP 1 2 Poles T1 3 Circuit 4 Actuator Style 1 SERIES 2MS Sealed Miniature Toggle Switch 4 ACTUATOR STYLE T1 Round Bat T2 Round Short Bat 2 Connected Terminals NONE NONE OFF OFF OFF 3 2-1, 5-4, 8-7 ON (ON) ON (ON) (ON) B4 2M1 SP 1 2 Poles 8 EPOXY SEAL E Epoxy Seal 3 Circuit T1 2 POLES SP Single pole - uses terminals 1, 2 & 3 DP Double pole - uses terminals 1, 2, 3, 4, 5 & 6 3P Three pole - uses terminals 1, 2, 3, 4, 5, 6, 7, 8 & 9 4P Three pole - uses terminals 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11 & 12 2 Connected Terminals NONE NONE OFF OFF OFF ON ON ON 3 2-1, 5-4, 8-7, 11-10 ON (ON) ON (ON) (ON) ON (ON) (ON) *Available with DP and 4P switches only. Center position connects 2-3, 5-4, 8-9, 11-10 4 ACTUATOR STYLE T1 Round Bat T2 Round Short Bat T3 Paddle T4 Medium Paddle T5 Long Paddle T6 Flat (B1,B2,B5,BA,BB,BE) T7 Large Bat (B0 bushing) T8 X-Large Bat (B0 bushing) T9 Black Plastic T0Rectangular TA Locking Lever TI Locking Lever TL Locking Lever 5 BUSHING B8 B1 Threaded Standard, keyway B9 B2 Non-Threaded Standard, keyway B0 B3 Threaded Short, keyway B4 Non-Threaded Short, keyway BA B5 High Torque, 7.5mm, flat BB B6 High Torque, 8.0mm, keyway BE B7 Long threaded BL B1 4 Actuator Style 1 SERIES 2M1 Miniature Toggle Switch 3 CIRCUIT ( ) - momentary Position:1 2-3, 5-6, 8-9, 11-12 1ON 2ON 3ON 4(ON) 5ON 6*ON 7*(ON) 8*ON 7 Contacts 8 Seal VS21 Vertical, Snap-In, .460” [11.70mm] VS3 Vertical, .630” [16mm] VS31 Vertical, Snap-In, .630” [16mm] U2 Vertical, .551” [14mm] only 3PDT VS4 Vertical, .461” [11.70mm] VS41 Vertical, Snap-In, .461” [11.70mm] U4 Vertical, .551” [14mm] - only 3PDT VS5 Vertical, .630” [16mm] VS51 Vertical, Snap-In, .630” [16mm] Unthreaded, Short, Keyway, Flat Notes: B1 Bushing switches supplied with (2) 2M1-HDW2 nuts, (1) 2M1-HDW11 washer and (1) 2M1-HDWI5 locking ring. See page 76-77. 1 Movable contact & terminal platings: silver over copper alloy 2 Movable contact & terminal platings: gold over nickel over copper alloy 3 Terminal platings: tin over nickel over copper alloy 4 Tin option not available with M1 terminal 1 Series 6 Termination 7 CONTACTS / TERMINALS Contact Material Terminal Plating Rating Approvals G silver 1 gold over silver 5A 125VAC or 28VDC, , IP67 2A 250VAC 2 3, 4 K gold tin 0.4VA max 20V max (AC/DC) IP67 tin 3, 4 5A 125VAC or 28VDC, , IP67 P silver 1 2A 250VAC 2 2 R gold gold 0.4VA max 20V max (AC/DC) IP67 T9 Long Black Plastic .492” length P1 Plastic Anti-Static .496” length P2 Plastic Anti-Static .299” length 5 BUSHING B1 Threaded, Keyway 5 Bushing M1 G E 6 TERMINATION M1 4 Solder Lug M2 PCB M3 Quick Connect M5-1 Wire Wrap, .750” [19.05mm] M5-2 Wire Wrap, .964” [24.48mm] M5-3 Wire Wrap, .425” [10.80mm] M5-4 Wire Wrap, 1.062” [25.97mm] M6 Right Angle, PC Thru-Hole M61 Right Angle, Snap-In M7 Vertical, Right Angle, PC Thru-Hole M71 Vertical, Right Angle, Snap-In VS2 Vertical, .461” [11.70mm] 2 POLES WSP Single pole - uses terminals 1, 2 & 3 WDP Double pole - uses terminals 1, 2, 3, 4, 5 & 6 W3P Three pole - uses terminals 1, 2, 3, 4, 5, 6, 7, 8 & 9 3 CIRCUIT ( ) - momentary Position:1 2-3, 5-6, 8-9 1ON 2ON 3ON 4(ON) 5ON B4 Metric Splashproof 15/32” Threaded (Standard for T7 & T8 actuator styles) Threaded for T6 Non-Threaded for T6 Threaded Hi Torque for T6 Threaded, Locking 5 Bushing O without Epoxy Seal M1 Q E 6 Termination 6 TERMINATION M1 4 Solder Lug M2 PCB M3 Quick Connect M5-1 Wire Wrap, .750” [19.05mm] M5-2 Wire Wrap, .964” [24.48mm] M5-3 Wire Wrap, .425” [10.80mm] M5-4 Wire Wrap, 1.062” [25.97mm] M6 Right Angle, PC Thru-Hole M61 Right Angle, Snap-In M7 Vertical, Right Angle, PC Thru-Hole 7 Contacts 8 Seal M71 Vertical, Right Angle, Snap-In VS2 Vertical, .461” [11.70mm] VS21 Vertical, Snap-In, .461” [11.70mm] VS3 Vertical, .630” [16mm] VS31 Vertical, Snap-In, .630” [16mm] VS4 Vertical, .461” [11.70mm] VS41 Vertical, Snap-In, .461” [11.70mm] VS5 Vertical, .630” [16mm] VS51 Vertical, Snap-In, .630” [16mm] 7 CONTACTS / TERMINALS Contact Material Terminal Plating Rating Approvals G silver 1 gold over silver 5A 125VAC or 28VDC, , , IP67 2A 250VAC 2 3, 4 K gold tin 0.4VA max 20V max (AC/DC) N/A P silver 1 tin 3, 4 5A 125VAC or 28VDC, , , IP67 2A 250VAC Q silver 1 silver 1 5A 125VAC or 28VDC, , , IP67 2A 250VAC R gold 2 gold 2 0.4VA max 20V max (AC/DC) N/A 8 EPOXY SEAL E Epoxy Seal O without Epoxy Seal Notes: B1 Bushing switches supplied with (2) 2M1-HDW2 nuts, (1) 2M1-HDW11 washer and (1) 2M1-HDWI5 locking ring. 1 Movable contact & terminal platings: silver over copper alloy 2 Movable contact & terminal platings: gold over nickel over copper alloy 3 Terminal platings: tin over nickel over copper alloy 4 Tin option not available with M1 terminal Email: [email protected] Application Support: [email protected] Phone: (860) 793–9281 Fax: (860) 793–9231 www.carlingtech.com 4 | 2M-Series - 2M Accessories 2M-Series Accessories To order accessories assembled on a switch, specify the switch number followed by the accessory part number and the word “assembled”. Ex: 2M1-SP1-T1-B1M1QE-T12 ASSEMBLED. To order accessories in bulk, specify the Series, followed by the accessory. Ex: 2M1-T12. See page 76 for dimensional specifications. Optional Toggle Cap 2M1 1 Series T1 2 2 Toggle Cap Size 1 SERIES 2M1 Fits 2M1H, 2MS or 2M1 2 TOGGLE CAP SIZE T1 10.6 mm T2 3 CAP COLOR 1 White 2 Black 3 Red 5 6 7 Yellow Green Blue 7.6 mm Optional Dress and Knurled Nuts 2M1 1 Series 1 SERIES 2M1 Fits 2M1H, 2MS or 2M1 Optional Rubber Hood HDW3 2 Nut 2 NUT HDW3 HDW5 2M1 1 Series 1 SERIES 2M1 Fits 2M1H, 2MS or 2M1 3 Color Dress nut for 1/4” bushing Knurled nut for 15/32” bushing (2M1-Series only) E1A 2 Rubber Boot Seal 2 RUBBER BOOT SEAL E1A 1/4 - 40” UNS bushing (Not available for B0 bushing option) K1 Metric M6 bushing (B8 bushing only) YE1D 15/32 - 32” UNS bushing (TJ, TK and B0 bushings only) YE1E 15/32 - 32” UNS bushing 1/2 boot (T7, T8, TJ, TK and B0 bushings only) Email: [email protected] Application Support: [email protected] Phone: (860) 793–9281 Fax: (860) 793–9231 www.carlingtech.com 2M-Series - 2M1H-Series Dimensional Specifications | 5 2M1H-Series Dimensional Specifications: in. [mm] Single Pole Double Pole FLAT THD. FLAT THD. Internal O-ring sealed Anti-rotational actuator Anti-rotational actuator Internal O-ring sealed 15/32-32 UNS 3 6 O-ring 2 1 15/32-32 UNS O-ring 3 5 2 4 1 Epoxy Seal Epoxy Seal Actuator Options Bushing Options & Mounting 15/32-32 UNS FLAT-CUT DIM "A" TJ TK .709 [18.00] BJ .429 [10.90] BK .386 [9.80] DIM "A" .512 [13.00] Termination Options M1 Standard Solder Lug M2 PC Thru-Hole M3 Quick Connect M5 Wire Wrap 'A' THK .030 [0.75] THK .030 [0.75] THK .030 [0.75] THK .030 [0.75] Email: [email protected] Application Support: [email protected] Phone: (860) 793–9281 Fax: (860) 793–9231 www.carlingtech.com OPTION CODE DIM.'A' M5-1 .750 [19.05] M5-2 .964 [24.48] M5-3 .425 [10.80] M5-4 1.062 [26.97] 6 | 2M-Series - 2MS-Series Dimensional Specifications 2MS-Series Dimensional Specifications: in. [mm] Single Pole EPOXY SAEL Double Pole EPOXY SEAL Three Pole EPOXY SEAL 9 8 6 5 7 3 2 4 1 Actuator Options T1 T2 T9 with Plastic Cap NO. P1 Plastic Toggle 1 2 3 4 5 6 7 8 9 P2 Plastic Toggle GLOSS PLASTIC CAP * Shown with B4 bushing. Subtract .075” (1.90 mm) from actuator height for B1 bushing. Email: [email protected] Application Support: [email protected] Phone: (860) 793–9281 Fax: (860) 793–9231 www.carlingtech.com COLOR White Black(std.) Red Orange Yellow Green Blue Brown Gray 2M-Series - 2MS-Series Dimensional Specifications | 7 2MS-Series Dimensional Specifications: in. [mm] Bushing Options B1 B4 1/4-40 UNS Termination Options M1 Standard Solder Lug EPOXY SEAL THK .030 [0.75] M2 PC Thru-Hole M3 Quick Connect EPOXY SEAL THK .030 [0.75] EPOXY SEAL THK .030 [0.75] M6 Single Pole M5 Wire Wrap EPOXY SEAL OPTION CODE DIM.'A' M5-1 .750 [19.05] M5-2 .964 [24.48] M5-3 .425 [10.80] M5-4 1.062 [26.97] THK .030 [0.75] P.C.MOUNTING EPOXY SEAL M6 Double Pole M6 Three Pole M7 Single Pole P.C.MOUNTING EPOXY SEAL P.C.MOUNTING EPOXY SEAL EPOXY SEAL P.C.MOUNTING Email: [email protected] Application Support: [email protected] Phone: (860) 793–9281 Fax: (860) 793–9231 www.carlingtech.com 8 | 2M-Series - 2MS-Series Dimensional Specifications 2MS-Series Dimensional Specifications: in. [mm] Termination Options M7 Double Pole P.C.MOUNTING EPOXY SEAL M7 Three Pole EPOXY SEAL P.C.MOUNTING VS2-VS3 Single Pole P.C.MOUNTING OPTION CODE DIM.'A' VS2 .461 [11.70] VS3 .630 [16.00] EPOXY SEAL VS2-VS3 Double Pole P.C.MOUNTING OPTION CODE DIM.'A' VS2 .461 [11.70] VS3 .630 [16.00] EPOXY SEAL U2-VS3 Three Pole P.C.MOUNTING OPTION CODE DIM.'A' U2 .551 [14.00] VS3 .630 [16.00] EPOXY SEAL Email: [email protected] Application Support: [email protected] Phone: (860) 793–9281 Fax: (860) 793–9231 www.carlingtech.com 2M-Series - 2MS-Series Dimensional Specifications | 9 2MS-Series Dimensional Specifications: in. [mm] VS4-VS5 Single Pole Termination Options P.C.MOUNTING OPTION CODE DIM.'A' VS4 .461 [11.70] VS5 .630 [16.00] EPOXY SEAL VS4-VS5 Double Pole P.C.MOUNTING OPTION CODE DIM.'A' VS4 .461 [11.70] VS5 .630 [16.00] EPOXY SEAL U4-VS5 Three Pole P.C.MOUNTING OPTION CODE DIM.'A' U4 .551 [14.00] VS5 .630 [16.00] EPOXY SEAL Snap-In Termination Options M61 VS21, VS31 M71 VS41, VS51 * PC Mounting for M61, M71, VS21, VS31, VS41, VS51 refer to M6, M7, VS2, VS3, VS4, VS5 respectively. Email: [email protected] Application Support: [email protected] Phone: (860) 793–9281 Fax: (860) 793–9231 www.carlingtech.com 10 | 2M-Series - 2M1-Series Dimensional Specifications 2M1-Series Dimensional Specifications: in. [mm] Single Pole Double Pole KEYWAY THIS SIDE KEYWAY THIS SIDE KEYWAY KEYWAY 1/4-40UNS 1/4-40UNS Three Pole Four Pole KEYWAY THIS SIDE KEYWAY THIS SIDE KEYWAY KEYWAY 1/4-40UNS 1/4-40UNS Actuator Options for Panel Rear Mount T1 T2 T6 T7 P7 Anti-Rotation 15/32-32UNS T3 T4 T8 P8 Anti-Rotation T5 T9 Plastic NO. COLOR 15/32-32UNS KEYWAY T0 1 White 2 Black(std.) 3 Red 4 Orange Yellow 5 Green 6 7 Blue Brown 8 9 Gray KEYWAY * T6 actuator is available with B1, B2, B5, B6, BA, BB & BE bushing. Actuator length shown for T1 – T5, T9 and T0 is with B1 bushing. T7, P7, T8 & P8 does not require a bushing code. Locking Lever TA Locking Lever TI FOR SP-1,DP-1 3P-1,4P-1 ONLY FOR SP-3,DP-3 3P-3,4P-3 ONLY FOR SP-1,DP-1 3P-1,4P-1 ONLY Locking Lever TL FOR SP-3,DP-3 3P-3,4P-3 ONLY FOR SP-1,DP-1 3P-1,4P-1 ONLY FOR SP-3,DP-3 3P-3,4P-3 ONLY Bushing Options B1 Threaded B2 Non-Threaded 1/4-40UNS B3 Threaded B4 Non-Threaded B5 High Torque 1/4-40UNS 1/4-40UNS 1/4-40UNS B6 High Torque Mfg. Option Relief or Imperf. Thd. Email: [email protected] Application Support: [email protected] Phone: (860) 793–9281 Fax: (860) 793–9231 www.carlingtech.com Mfg. Option Relief or Imperf. Thd. 2M-Series - 2M1-Series Dimensional Specifications | 11 2M1-Series Dimensional Specifications: in. [mm] B7 Long Bushing Options B9 Splash-Proof B8 Metric BL Locking Lever SEALS ON-ON model 1/4-40UNS Mfg. Option Relief or Imperf. Thd. M6P 0.75 THD 1/4-40UNS ON-OFF-ON & ON-ON-ON model BA Threaded for T6 BB Non-Threaded for T6 BB High Torque for T6 1/4-40UNS 1/4-40UNS Panel Mounting 1/4 INCH BUSHING 15/32 INCH BUSHING Termination Options M1 Standard Solder Lug M2 PC Thru-Hole M3 Quick Connect M5 Wire Wrap 'A' THK .030 [0.75] THK .030 [0.75] THK .030 [0.75] OPTION CODE DIM.'A' M5-1 .750 [19.05] M5-2 .964 [24.48] M5-3 .425 [10.80] M5-4 1.062 [26.97] THK .030 [0.75] M6 Single Pole P.C.MOUNTING M6 Double Pole P.C.MOUNTING Email: [email protected] Application Support: [email protected] Phone: (860) 793–9281 Fax: (860) 793–9231 www.carlingtech.com 12 | 2M-Series - 2M1-Series Dimensional Specifications 2M1-Series Dimensional Specifications: in. [mm] Termination Options M6 Three Pole P.C.MOUNTING M7 Single Pole P.C.MOUNTING M7 Double Pole P.C.MOUNTING M7 Three Pole P.C.MOUNTING M7 Four Pole P.C.MOUNTING VS2-VS3 Single Pole P.C.MOUNTING OPTION CODE DIM.'A' VS2 .461 [11.70] VS3 .630 [16.00] Email: [email protected] Application Support: [email protected] Phone: (860) 793–9281 Fax: (860) 793–9231 www.carlingtech.com 2M-Series - 2M1-Series Dimensional Specifications | 13 2M1-Series Dimensional Specifications: in. [mm] VS2-VS3 Double Pole Termination Options P.C.MOUNTING OPTION CODE DIM.'A' VS2 .461 [11.70] VS3 .630 [16.00] VS4-VS5 Single Pole P.C.MOUNTING OPTION CODE DIM.'A' VS4 .461 [11.70] VS5 .630 [16.00] VS4-VS5 Double Pole P.C.MOUNTING OPTION CODE DIM.'A' VS4 .461 [11.70] VS5 .630 [16.00] Snap-In Termination Options M61 (available with SP & DP) VS21, VS31 M71 (available with SP & DP) VS41, VS51 * PC Mounting for M61,M71,VS21,VS31,VS41,VS51 refer to M6,M7,VS2,VS3,VS4,VS5 respectively. Email: [email protected] Application Support: [email protected] Phone: (860) 793–9281 Fax: (860) 793–9231 www.carlingtech.com 14 | Notes Email: [email protected] Application Support: [email protected] Phone: (860) 793–9281 Fax: (860) 793–9231 www.carlingtech.com Reps & Contact | 15 Authorized Sales Representatives Click on the group name on the map below to find your local representative or visit www.carlingtech.com/findarep. « « Matera W. Canada Matera E. Canada MIDWEST DM Michigan TEMCO Northwest Alaska, Hawaii « NORTHERN Hanna Lind Ltd. Melody Emery Sierra Bridge Marketing Omega Limited Dy-tronix Inc. LD. Allen Norris DM Assoc East Pacent DM Assoc TSI North TSI WEST Signal Enterprises Luscombe Engineering Pinnacle Marketing Matrix DM Mexico South America Mexico « « Sunbelt Components SOUTHEAST ProRep Solutions LATIN AMERICA Americas Europe Middle East Africa Asia-Pacific Oceania About Carling Founded in 1920, Carling Technologies is a leading manufacturer of electrical and electronic switches and assemblies, circuit breakers, electronic controls, power distribution units, and multiplexed power distribution systems. With four ISO registered manufacturing facilities and technical sales offices worldwide, Carling Technologies Sales, Service and Engineering teams do much more than manufacture electrical components, they engineer powerful solutions! To learn more about Carling please visit www.carlingtech.com/company-profile. To view all of Carling’s environmental, quality, health & safety certifications please visit www.carlingtech.com/environmental-certifications Email: [email protected] Application Support: [email protected] Phone: (860) 793–9281 Fax: (860) 793–9231 www.carlingtech.com Worldwide Headquarters Carling Technologies, Inc. 60 Johnson Avenue, Plainville, CT 06062 Phone: 860.793.9281 Fax: 860.793.9231 Email: [email protected] Northern Region Sales Office: [email protected] Southeast Region Sales Office: [email protected] Midwest Region Sales Office: [email protected] West Region Sales Office: [email protected] Latin America Sales Office: [email protected] Asia-Pacific Headquarters Carling Technologies, Asia-Pacific Ltd., Kowloon, Hong Kong Phone: Int + 852-2737-2277 Fax: Int + 852-2736-9332 Email: [email protected] Shenzhen, China: [email protected] Shanghai, China: [email protected] Pune, India: [email protected] Kaohsiung, Taiwan: [email protected] Yokohama, Japan: [email protected] Europe | Middle East | Africa Headquarters Carling Technologies LTD 4 Airport Business Park, Exeter Airport, Clyst Honiton, Exeter, Devon, EX5 2UL, UK Phone: Int + 44 1392.364422 Fax: Int + 44 1392.364477 Email: [email protected] Germany: [email protected] France: [email protected] www.carlingtech.com REV_06_2016