SGP3U Surface Mount Glass Passivated High Efficient Rectifiers Reverse Voltage 200V Forward Current 1A Features • • • • • • • Low forward voltage drop Low leakage current Low profile - typical height of 1.0 mm Moisture sensitivity: level 1, per J-STD-020 Glass passivated chip and super fast switching time High temperature soldering guaranteed: 260℃/10 seconds Halogen-free according to IEC 61249-2-21 definition eSGP(SOD-323F) Typical Applications For use of fast switch rectification in lighting, cellular phone, portable device, power supplies and other consumer applications. Maximum Ratings (TA = 25 °C unless otherwise noted) Parameter Symbol SGP3U Unit VRRM VRMS VDC 200 V 140 V 200 V Maximum average forward rectified current IF(AV) 1.0 A Peak forward surge current 8.3 ms single half sine-wave superimposed on rated load IFSM 25 A Operating junction and storage temperature range TJ, TSTG - 55 to + 150 °C Maximum repetitive peak reverse voltage Maximum RMS voltage Maximum DC blocking voltage Electrical Characteristics Parameter Test Conditions Symbol Maximum instantaneous 1A forward voltage Maximum DC reverse current Maximum reverse recovery time (TA = 25 °C unless otherwise noted) TA=25℃ TA=125℃ IF=0.5A,IR=1.0A, Irr=0.25A VF SGP3U Unit 0.95(typ:0.88) Volts 5 IR 50 trr 35 nS CJ 9.5 pF Typical junction capacitance 4.0 V, 1 MHz Typical thermal juntion to ambient RθJA 97 juntion to lead RθJL 27 resistance 1) µA ℃/W Note:1),The thermal resistance from junction to ambient or lead,mounted on P.C.B with 5×5mm copper pads,2 OZ,FR4 PCB www.goodark.com 1/4 2016.01-Rev.A SGP3U Surface Mount Glass Passivated High Efficient Rectifiers Reverse Voltage 200V Forward Current 1A Ratings and Characteristics Curves Peak Forward Surge Current (A) Average Forward Rectified Current, (A) (TA = 25℃ unless otherwise noted) 1.2 1 0.8 0.6 0.4 0.2 0 0 25 50 75 100 125 150 Lead temperature(℃) 100 25 20 15 10 5 0 1 10 100 Number of Cycles at 60Hz 100 Instantaneous Reverse Current (uA) Instantaneous Forward Current (A) 30 Figure 2.Maximum Non-Repetitive Peak Forward Surge Current Figure 1.Forward Current Derating Curve 10 1 25℃ 85℃ 125℃ 150℃ 0.1 0 25℃ 85℃ 125℃ 150℃ 10 1 0.1 0.01 0.01 0.4 0.8 1.2 1.6 2 Instantaneous Forward Voltage (V) 0 Figure 3. Typical Instantaneous Forward Characteristics 40 80 120 160 200 Instantaneous Reverse Voltage (V) Figure 4. Typical Reverse Characteristics 1000 70 Reverse Recovery Time(ns) Junction Capacitance (pF) 35 Tj=25℃ f=1.0MHZ Vsig=50mVp-p 100 10 1 60 50 40 30 20 10 0 0.1 1 Reverse Voltage (V) 0 10 50 75 100 125 150 Temberature(℃) Figure 6. Typical reverse recovery time Figure 5. Typical Junction Capacitance www.goodark.com 25 2/4 2016.01-Rev.A SGP3U Surface Mount Glass Passivated High Efficient Rectifiers Reverse Voltage 200V Forward Current 1A Package Outline Dimensions Unit:mm Package Unit:inch eSGP MIN MAX MIN MAX A 0.9 1.08 0.035 0.043 B 0.5 0.7 0.020 0.028 C 0.1 0.25 0.004 0.010 D 1.4 1.6 0.055 0.063 E 2.0 2.2 0.079 0.087 L 0.35 0.65 0.014 0.026 HE 2.4 2.8 0.094 0.110 Packing Information Packing quantities: 1),3000 pcs/Reel, 40 Reels/Box; 8mm Tape, 7" Reel 2),10000 pcs/Reel, 16 Reels/Box; 8mm Tape, 13" Reel Tape & Reel Specification www.goodark.com 3/4 2016.01-Rev.A SGP3U Surface Mount Glass Passivated High Efficient Rectifiers Reverse Voltage 200V Forward Current 1A Disclaimers These materials are intended as a reference to assist our customers in the selection of the Suzhou Good-Ark product best suited to the customer’s application; they do not convey any license under any intellectual property rights, or any other rights, belonging to Suzhou Good-Ark Electronics Co., Ltd.or a third party. Suzhou Good-Ark Electronics Co., Ltd. assumes no responsibility for any damage, or infringement of any third-party’ s rights, originating in the use of any product data, diagrams, charts, programs, algorithms, or circuit application examples contained in these materials. All information contained in these materials, including product data, diagrams, charts, programs and algorithms represents information on products at the time of publication of these materials, and are subject to change by Suzhou Good-Ark Electronics Co., Ltd. without notice due to product improvements or other reasons. It is therefore recommended that customers contact Suzhou GoodArk Electronics Co., Ltd. or an authorized Suzhou Good-Ark Electronics Co., Ltd. for the latest product information before purchasing a product listed herein. The information described here may contain technical inaccuracies or typographical errors. Suzhou Good-Ark Electronics Co., Ltd. assumes no responsibility for any damage, liability, or other loss rising from these inaccuracies or errors. Please also pay attention to information published by Suzhou Good-Ark Electronics Co., Ltd. by various means, including our website home page. (http://www.goodark.com) When using any or all of the information contained in these materials, including product data, diagrams, charts, programs, and algorithms, Please be sure to evaluate all information as a total system before making a final decision on the applicability of the information and products. Suzhou Good-Ark Electronics Co., Ltd. assumes no responsibility for any damage, liability or other loss resulting from the information contained herein. The prior written approval of Suzhou Good-Ark Electronics Co., Ltd. is necessary to reprint or reproduce in whole or in part these materials. Please contact Suzhou Good-Ark Electronics Co., Ltd. or an authorized distributor for further details on these materials or the products contained herein. www.goodark.com 4/4 2016.01-Rev.A