F1DS thru F7DS Surface Mount Glass Passivated Standard Rectifier Reverse Voltage 50~1000V Forward Current 1A Features • • • • • • • • Glass passivated Standard Rectifiers Very low profile - typical height of 1.0 mm Low forward voltage drop Low leakage current Moisture sensitivity: level 1, per J-STD-020 AEC-Q101 qualified High temperature soldering guaranteed: 260℃/10 seconds Halogen-free according to IEC 61249-2-21 definition eSGA (SOD‐123FL) Typical Applications For use of general purpose rectification in lighting, cellular phone, portable device, power supplies and other consumer applications. Maximum Ratings (TA = 25 °C unless otherwise noted) Parameter Symbol F1DS F2DS F3DS F4DS F5DS F6DS F7DS Maximum repetitive peak reverse voltage VRRM Maximum RMS voltage VRMS Maximum DC blocking voltage VDC Maximum average forward rectified current IF(AV) Peak forward surge g current 8.3 ms single g IFSM half sine-wave superimposed on rated load Operating junction and storage temperature range 50 35 50 TJ, TSTG Electrical Characteristics 100 70 100 200 140 200 400 280 400 1.0 600 420 600 800 560 800 1000 700 1000 A - 55 to + 150 °C (TA = 25 °C unless otherwise noted) Test Conditions Symbol F1DS F2DS F3DS F4DS F5DS F6DS F7DS Maximum instantaneous forward voltage 1A TA=25℃ Typical reverse recovery time IF=0.5A,IR=1.0A, Typical junction capacitance Typical thermal resistance1) TA=125℃ Irr=0.25A 4.0 V, 1 MHz juntion to ambient juntion to case juntion to mount V V V A 25 Parameter Maximum DC reverse current at rated DC blocking g voltage g Unit VF 1.1 Unit Volts 5 IR µA 50 trr 1.8 uS CJ 6 pF RθJA RθJC RθJM 80 50 ℃/W 10 Note 1),The thermal resistance from junction to ambient,case or mount,mounted on P.C.B with 5×5mm copper pads,2 OZ,FR4 PCB www.goodark.com 1/4 2014.03-Rev.A F1DS thru F7DS Surface Mount Glass Passivated Standard Rectifier Reverse Voltage 50~1000V Forward Current 1A Package Outline Dimensions (TA = 25℃ unless otherwise noted) Figure 2.Maximum Non‐Repetitive Peak Forward Surge Current Figure 1.Forward Current Derating Curve Figure 3 Typical Reverse Characteristics Figure 3. Typical Reverse Characteristics Figure 4 Typical Junction Capacitance Figure 4. Typical Junction Capacitance Figure 5. Typical Instantaneous Forward Characteristics www.goodark.com 2/4 2014.03-Rev.A F1DS thru F7DS Surface Mount Glass Passivated Standard Rectifier Reverse Voltage 50~1000V Forward Current 1A Package Outline Dimensions Unit: mm DIM A Unit: inch MIN MAX MIN MAX 09 0.9 1 08 1.08 0 035 0.035 0 043 0.043 A1 0 0.1 0.000 0.004 B 0.85 1.05 0.033 0.041 C 0.1 0.25 0.004 0.010 D 1.7 2 0.067 0.079 E 2.9 3.1 0.114 0.122 L 0.43 0.83 0.017 0.033 HE 3.5 3.9 0.138 0.154 Soldering footprint Packing Information Packing quantities: 3000 pcs/Reel, 40 Reels/Box; 8mm Tape, 7" Reel Tape & Reel Specification www.goodark.com 3/4 2014.03-Rev.A F1DS thru F7DS Surface Mount Glass Passivated Standard Rectifier Reverse Voltage 50~1000V Forward Current 1A Disclaimers These materials are intended as a reference to assist our customers in the selection of the Suzhou Good-Ark product best suited to the customer ’ s application; they do not convey any license under any intellectual property rights, rights or any other rights, rights belonging to Suzhou Good-Ark Electronics Co., Ltd.or a third party. Suzhou Good-Ark Electronics Co., Ltd. assumes no responsibility for any damage, or infringement of any third-party ’ s rights, originating in the use of any product data, diagrams, charts, programs, algorithms, or circuit application examples contained in these materials. All information contained in these materials, including product data, diagrams, charts, programs and algorithms represents information on products at the time of publication of these materials, and are subject to change by Suzhou Good-Ark Electronics Co., Ltd. without notice due to product improvements or other reasons. It is therefore recommended that customers contact Suzhou Good-Ark Electronics Co., Ltd. or an authorized Suzhou Good Ark Electronics Co., Good-Ark Co Ltd. Ltd for the latest product information before purchasing a product listed herein. The information described here may contain technical inaccuracies or typographical errors. Suzhou Good-Ark Electronics Co., Ltd. assumes no responsibility for any damage, liability, or other loss rising from these inaccuracies or errors. Please also pay attention to information published by Suzhou Good-Ark Electronics Co., Ltd. by various means, including our website home page. (http://www.goodark.com) When using any or all of the information contained in these materials, including product data, diagrams, charts, programs, and algorithms, Please be sure to evaluate all information as a total system before making a final decision on the applicability of the information and products. Suzhou Good-Ark Electronics Co., Ltd. assumes no responsibility for any damage, liability or other loss resulting from the information contained t i dh herein. i The prior written approval of Suzhou Good-Ark Electronics Co., Ltd. is necessary to reprint or reproduce in whole or in part these materials. Please contact Suzhou Good-Ark Electronics Co., Ltd. or an authorized distributor for further details on these materials or the products contained herein. www.goodark.com 4/4 2014.03-Rev.A