INTERSIL EL1506CREZ

EL1506
®
Data Sheet
April 18, 2005
Medium Power Differential Line Driver
Features
The EL1506 is a very low power dual operational amplifier
designed for central office and customer premise line driving
for DMT ADSL solutions. This device features a high drive
capability of 400mA while consuming only 3.5mA of supply
current per amplifier from ±12V supplies. This driver
achieves a typical distortion of less than -75dBc, at 1MHz
into a 50Ω load. The EL1506 is available in the 28-pin
HTSSOP and the 24-pin thermally-enhanced SO packages.
Both parts are specified for operation over the full -40°C to
+85°C temperature range.
• Drives 360mA at 16VP-P on ±12V supplies
The EL1506 has an ENABLE pin which can be used to
enable and disable the outputs.
• ADSL G.DMT and G.lite CO line driving
In most applications, the EL1506 is an upgrade and pincompatible drop-in replacement for the AD8016.
• ADSL CPE line driving
FN7114.1
• 40VP-P differential output drive into 100Ω
• -75dBc typical driver output distortion driving 50Ω at 1MHz
• Low quiescent current of 3.5mA per amplifier
• Power-down disable mode
• Pb-Free available (RoHS compliant)
Applications
• G.SHDSL, HDSL2 line driver
• Video distribution amplifier
Ordering Information
• Video twisted-pair line driver
PACKAGE
TAPE &
REEL
PKG. DWG. #
EL1506CM
24-Pin SO
-
MDP0027
EL1506CRE
28-Pin HTSSOP
-
MDP0048
EL1506CRE-T7
28-Pin HTSSOP
7”
MDP0048
EL1506CRE-T13
28-Pin HTSSOP
13”
MDP0048
EL1506CREZ
(See Note)
28-Pin HTSSOP
(Pb-free)
-
MDP0048
EL1506CREZ-T7
(See Note)
28-Pin HTSSOP
(Pb-free)
7”
MDP0048
EL1506CREZ-T13
(See Note)
28-Pin HTSSOP
(Pb-free)
13”
MDP0048
PART NUMBER
• Functional and pin-compatible with AD8016
NOTE: Intersil Pb-free products employ special Pb-free material sets;
molding compounds/die attach materials and 100% matte tin plate
termination finish, which are RoHS compliant and compatible with
both SnPb and Pb-free soldering operations. Intersil Pb-free products
are MSL classified at Pb-free peak reflow temperatures that meet or
exceed the Pb-free requirements of IPC/JEDEC J STD-020.
Get Full Datasheet
1
CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures.
1-888-INTERSIL or 1-888-468-3774 | Intersil (and design) is a registered trademark of Intersil Americas Inc.
Copyright Intersil Americas Inc. 2002, 2003, 2005. All Rights Reserved
All other trademarks mentioned are the property of their respective owners.
EL1506
All Intersil U.S. products are manufactured, assembled and tested utilizing ISO9000 quality systems.
Intersil Corporation’s quality certifications can be viewed at www.intersil.com/design/quality
Intersil products are sold by description only. Intersil Corporation reserves the right to make changes in circuit design, software and/or specifications at any time without
notice. Accordingly, the reader is cautioned to verify that data sheets are current before placing orders. Information furnished by Intersil is believed to be accurate and
reliable. However, no responsibility is assumed by Intersil or its subsidiaries for its use; nor for any infringements of patents or other rights of third parties which may result
from its use. No license is granted by implication or otherwise under any patent or patent rights of Intersil or its subsidiaries.
For information regarding Intersil Corporation and its products, see www.intersil.com
2