ISL1536 ® Data Sheet March 8, 2010 Dual Channel Central Office ADSL2+ Line Driver The ISL1536 is a very low power dual channel differential amplifier designed for central office line driving for DMT ADSL2+. This device features a high drive capability of 400mA while consuming only 4mA of supply current per amplifier from ±12V supplies. It integrates gain and bias resistors while maintaining high slew rate and low distortion. • Internal Fixed Gain AV = 12.85 • Integrated Feedback Resistors • 43.4VP-P Differential Output Drive into 100Ω • 41.6VP-P Minimum Differential Output Drive into 60Ω • -59dBc Typical Driver Output Distortion Driving 50Ω at 2MHz • Power-Down Disable Control ISL1536IRZ-T13* 153 6IRZ -40 to +85 16 Ld QFN L16.4x4E *Please refer to TB347 for details on reel specifications. NOTE: These Intersil Pb-free plastic packaged products employ special Pb-free material sets, molding compounds/die attach materials, and 100% matte tin plate plus anneal (e3 termination finish, which is RoHS compliant and compatible with both SnPb and Pb-free soldering operations). Intersil Pb-free products are MSL classified at Pb-free peak reflow temperatures that meet or exceed the Pb-free requirements of IPC/JEDEC J STD-020. Get Full Datasheet Applications • ADSL, ADSL2, ADSL2+ Line Drivers • G.SHDSL, HDSL2 Line Drivers • Video Distribution Amplifiers • Video Twisted-pair Line Drivers Pinout ISL1536 (16 LD 4X4 QFN) TOP VIEW OUTA -40 to +85 16 Ld QFN L16.4x4E VS+ 153 6IRZ • Pb-Free (RoHS Compliant) DISAB PKG. DWG. # VBAB PACKAGE (Pb-Free) 16 15 14 13 INA 1 12 OUTB INB 2 11 NC THERMAL PAD* GND 3 10 OUTC 9 OUTD 5 6 7 8 VBCD DISCD VS- INC 4 IND ISL1536IRZ PART MARKING TEMP. RANGE (°C) Features • Low Quiescent Current of 3mA per Amplifier Ordering Information PART NUMBER (Note) FN6508.3 *GND FOR BOTH SINGLE/DUAL SUPPLY 1 CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures. 1-888-INTERSIL or1-888-468-3774 | Intersil (and design) is a registered trademark of Intersil Americas Inc. Copyright © Intersil Americas Inc. 2008, 2009, 2010. All Rights Reserved. All other trademarks mentioned are the property of their respective owners. ISL1536 All Intersil U.S. products are manufactured, assembled and tested utilizing ISO9000 quality systems. Intersil Corporation’s quality certifications can be viewed at www.intersil.com/design/quality Intersil products are sold by description only. Intersil Corporation reserves the right to make changes in circuit design, software and/or specifications at any time without notice. Accordingly, the reader is cautioned to verify that data sheets are current before placing orders. Information furnished by Intersil is believed to be accurate and reliable. However, no responsibility is assumed by Intersil or its subsidiaries for its use; nor for any infringements of patents or other rights of third parties which may result from its use. No license is granted by implication or otherwise under any patent or patent rights of Intersil or its subsidiaries. For information regarding Intersil Corporation and its products, see www.intersil.com 2 FN6508.3 March 8, 2010