UNISONIC TECHNOLOGIES CO., LTD UT136FF/FG TRIAC TRIAC DESCRIPTION Glass passivated triac in a full pack plastic envelope, intended for use in applications requiring high bidirectional transient and blocking voltage capability and high thermal cycling performance. Typical applications include motor control, industrial and domestic lighting, heating and static switching. SYMBOL ORDERING INFORMATION Ordering Number Lead Free Halogen Free UT136FFL-5-TF3-R UT136FFP-5-TF3-R UT136FFL-6-TF3-R UT136FFP-6-TF3-R UT136FFL-8-TF3-R UT136FFP-8-TF3-R UT136FGL-5-TF3-R UT136FGP-5-TF3-R UT136FGL-6-TF3-R UT136FGP-6-TF3-R UT136FGL-8-TF3-R UT136FGP-8-TF3-R Package TO-220F TO-220F TO-220F TO-220F TO-220F TO-220F Pin Description 1 2 3 MT1 MT2 G MT1 MT2 G MT1 MT2 G MT1 MT2 G MT1 MT2 G MT1 MT2 G Packing Tube Tube Tube Tube Tube Tube MARKING UT136FF www.unisonic.com.tw Copyright © 2014 Unisonic Technologies Co., Ltd UT136FG 1 of 6 QW-R401-018.E UT136FF/FG TRIAC ABSOLUTE MAXIMUM RATING PARAMETER SYMBOL UT136FF/FG-5 UT136FF/FG-6 UT136FF/FG-8 Repetitive Peak Off-State Voltages VDRM RATINGS 500(Note2) 600(Note2) 800 UNIT V RMS On-state Current IT(RMS) 4 A Full sine wave, THS ≤92C Non-Repetitive Peak. On-State Current t =20 ms 25 ITSM Full sine wave, TJ =125C prior to surge, with A t =16.7 ms 27 reapplied VDRM(MAX) I2t For Fusing (t =10 ms) I2 t 3.1 A2 s 50 T2 + G+ Repetitive Rate of Rise of On-state Current T2 + G50 after Triggering A/µs dIT /dt T2 - G50 ITM=6 A, IG=0.2 A, dIG/dt=0.2A/µs T2 - G+ 10 Peak Gate Voltage VGM 5 V Peak Gate Current IGM 2 A Peak Gate Power PGM 5 W Average Gate Power (Over any 20ms period) PG(AV) 0.5 W Operating Junction Temperature TJ 125 °C Storage Temperature TSTG -40 ~ +150 °C Notes: 1. Absolute maximum ratings are those values beyond which the device could be permanently damaged. Absolute maximum ratings are stress ratings only and functional device operation is not implied. 2. Although not recommended, off-state voltages up to 800V may be applied without damage, but the triac may switch to the on-state. The rate of rise of current should not exceed 3A/µs. THERMAL DATA PARAMETER Thermal Resistance, Junction to Ambient (In free air) MIN TYP 55 MAX UNIT K/W ISOLATION LIMITING VALUE & CHARACTERISTIC (THS =25C, unless otherwise specified) PARAMETER Repetitive peak voltage form all three terminals to external heatsink (R.H.≤ 65%,clean and dustfree) Capacitance from MT2 to external heatsink (f =1MHz) SYMBOL θJA SYMBOL MIN TYP VISOL CISOL MAX UNIT 1500 V 12 pF STATIC CHARACTERISTICS (TJ=25°C, unless otherwise specified) PARAMETER SYMBOL TEST CONDITIONS T2 + G+ T2 + GT2 - GT2 - G+ T2 + G+ T2 + GT2 - GT2 - G+ Gate Trigger Current IGT VD =12 V,IT =0.1A Latching Current IL VD =12 V,IGT =0.1A Holding Current On-State Voltage IH VT Gate Trigger Voltage VGT VD =12 V,IGT =0.1A IT =5 A VD=12V, IT =0.1A VD=400V, IT=0.1A, TJ=125°C VD=VDRM(MAX), TJ =125°C Off-State Leakage Current ID UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw MAX UT136FF UT136FG 5 25 50 8 25 50 11 25 50 30 70 100 7 20 30 16 30 45 5 20 30 7 30 45 5 15 30 1.4 1.70 0.7 1.5 0.4 0.1 0.5 MIN TYP 0.25 UNIT mA mA mA mA mA mA mA mA mA V V V mA 2 of 6 QW-R401-018.E UT136FF/FG TRIAC DYNAMIC CHARACTERISTICS (TJ=25°C, unless otherwise specified) PARAMETER Critical Rate of Rise of Off-State Voltage Critical Rate of Change of Commutating Voltage Gate Controlled Turn-On Time SYMBOL TEST CONDITIONS VDM = 67% VDRM(MAX),TJ=125°C, exponential waveform, gate open circuit VDM=400V, TJ=95°C,IT(RMS)=4A, dVCOM/dt dICOM /dt=1.8A/ms ,gate open circuit ITM =6A,VD= VDRM(MAX), tGT IG=0.1A,dIG/dt=5A/μs dVD/dt UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw MIN TYP MAX UNIT UT136FF UT136FG 50 200 250 V/µs 10 50 V/µs 2 µs 3 of 6 QW-R401-018.E UT136FF/FG TYPICAL CHARACTERISTICS α 6 4 3 97.5 103 108.5 2 114 1 119.5 125 0 1 2 3 4 RMS On-State Current, IT(RMS) (A) TJ Initial=125°C max 100 dIT/dt Limit T2·G+ Quadrant 10 10us 5 Maximum Permissible Non-Repetitive Peak On-State Current,ITSM,vs Number of Cycles, for Sinusoidal Current,f=50Hz 30 IT ITSM 25 Time 20 TJ Initial=125°C max 15 10 5 0 1 12 Time 10 100 Number of Cycles at 50Hz 5 1000 Maximum Permissible Repetitive RMS OnState Current,IT(RMS),vs Surge Duration, for Sinusoidal Current,f=50Hz,THS≤92°C 10 8 6 4 2 0 0.01 0.1 1 Surge Duration, S 10 UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw 100us 1ms 10ms Pulse Width, tP (s) 100ms Maximum Permissible RMS Current IT(RMS) vs Heatsink Temperature THS 92°C 4 3 2 1 0 -50 1.6 Normalised Gate Trigger Voltage, VGT(TJ)/VGT(25°C) Maximum Permissible Non-Repetitive Peak On-State Current,ITSM (A) 92 α=180 α=120 α=80 α=60 α=30 5 0 Maximum Permissible Repetitive RMS On-State Current,IT(RMS) (A) 88.5 TSP(max)/C Maximum On-State Dissipation, PTOT (W) α 7 Maximum Permissible Non-Repetitive Peak On-State Current, ITSM (A) Maximum Permissible Non-Repetitive Peak On-State Current,ITSM,vs Pulse Width tP, for Sinusoidal Current,tP≤20ms 1000 IT ITSM Maximum On-State Dissipation, PTOT vs RMS OnState Current,IT(RMS),Where α=Conduction Angle 8 81 Maximum Permissible RMS Current IT(RMS) (A) TRIAC 0 50 100 Heatsink Temperature, THS (°C) 150 Normalised Gate Trigger Voltage VGT(TJ)/ VGT(25°C), vs Junction Temperature TJ 1.4 1.2 1 0.8 0.6 0.4 -50 0 50 100 Junction Temperature, TJ (°C) 150 4 of 6 QW-R401-018.E UT136FF/FG TRIAC TYPICAL CHARACTERISTICS(Cont.) 3 Normalised Gate Trigger Current IGT(TJ)/IGT(25°C),vs Junction Temperature TJ T2+G+ T2+GT2-GT2-G+ 2.5 2 3 2.5 2 1.5 1.5 1 1 0.5 0.5 0 -50 3 50 100 0 Junction Temperature, TJ (°C) 150 Normalised Holding Current IH(TJ)/IH(25°C),vs Junction Temperature TJ 2.5 0 -50 8 1.5 6 1 4 0.5 2 10 VO=1.27V RS=0.091Ohms 0 150 unidirectional 2 3 2.5 UT136FG UT136FF 10 With Heatsink Compound Without Heatsink Compound dICOM/dt= 5.1A/ms 3.9 3 2.3 1.8 1.4 1 1s 10s UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw 1.5 VT/V Typical Commutation dV/dt vs Junction Temperature,parameter Commutation dIT/dt. The Triac Should Commutate When the dV/dt is belowthe value on the appropriate curve for pre-commutation dIT/dt 1000 Off-State dV/dt Limit t 1ms 10ms 0.1s Pulse Width, tP (s) 1 tP 0.1 10us 0.1ms 0.5 100 bidirectional PD 0.01 150 0 50 100 0 Junction Temperature, TJ (°C) Transient Thermal Impedance vs Pulse Width 1 50 100 0 Junction Temperature, TJ (°C) Typical and Maximum On-State Characteristic 12 TJ=125°C max TJ=25°C 10 typ 2 0 -50 Normalised Latching Current IL(TJ)/IL(25°C),vs Junction Temperature TJ 0 50 100 Junction Temperature, TJ (°C) 150 5 of 6 QW-R401-018.E UT136FF/FG TRIAC UTC assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all UTC products described or contained herein. UTC products are not designed for use in life support appliances, devices or systems where malfunction of these products can be reasonably expected to result in personal injury. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. The information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed without notice. UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw 6 of 6 QW-R401-018.E