DMS Accessories OBSOLETE PRODUCT Subminiature, 1 Watt Isolated DC/DC Converters Contact Factory for Replacement Model Input Voltage: 5 VDC Models 12 VDC Models 24 VDC Models Output Short Circuit Duration Internal Power Dissipation Output Power (% of Rated Load) ABSOLUTE MAXIMUM RATING 9 VDC 18 VDC 30 VDC Momentary 0.45W ELECTRIAL SPECIFICATIONS Input Specifications: Input Voltage Range Input Filter Output Specifications: Output Voltage Accuracy Ripple & Noise (20 MHz BW) ~ Line Regulation LL-HL Load Regulation 20% L-FL Minimum Load Temperature Coefficient @ FL Short Circuit Protection General Specifications: Efficiency Isolation Voltage (1 min) Isolation Capacitance Isolation Resistance Switching Frequency Environmental Specifications: Operating Temperature Range Storage Temperature Range Derating Humidity Cooling Physical Characteristics: Size: 5V/12V Input 24V Input Weight:5V/12V Input 24V Input Case Material ±10% Internal Capacitor 100 5vdc output 0.033W/C 75 50 25 -20 -10 0 10 20 30 40 50 60 70 80 90 100 110 Ambient Temperature C ±3%, Max. 50 mV Pk-Pk See Ordering Information See Ordering Information 10% of Full Load ±0.02%/ °C Momentary 0.45 (11.5) See Ordering Information 1000 VDC 60 pF 109 W 100 kHz 105S5HFS 0.02 (0.5) –25°C to +75°C –40°C to +125°C See Derating Curve Up to 95%, (non-condensing) Free-air Convection 0.40 (10.16) 0.16 (4.00) 0.075 (1.90) 0.10 (2.54) 0.02 (0.61) 0.45 x 0.24 x 0.40 inches (11.5 x 6.1 x 10.2 mm) 0.45 x 0.28 x 0.40 (11.5 x 7.1 x 10.2) 0.04 Oz (1.3g) 0.05 Oz (1.7g) Non-Conductive Black Plastic 1 2 0.071 (1.80) 3 5V/12V Input 0.24 (6.10) 24V Input 0.28 (7.10) 4 0.01 (0.25) Pin Description Specification Notes: 1. Ripple and Noise is specified at 100 mV Pk-Pk. 2. Absolute Maximum Ratings are specification limits that, if exceeded, could permanently damage the unit.These are not continuous operating ratings. Specifications typical @ +25°C with nominal input voltage and under full output load conditions, unless otherwise noted. Specifications subject to change without notice. 1 2 3 4 –V input (GND) +V input (VCC) –Voutput (0V) +V output ORDERING INFORMATION DATEL Part # Marking 39-0276550 39-0276552 39-0276551 105S5HFS 105S12HFS 105S24HFS Voltage (VDC) 5 12 24 Murata Power Solutions, Inc. 11 Cabot Boulevard, Mansfield, MA 02048-1151 U.S.A. ISO 9001 and 14001 REGISTERED Input Current (mA) No Full Load Load 27 13 8 290 117 60 Output Voltage (VDC) Current (mA) 5.0 5.0 5.0 200 200 200 Regulation Line%/% VIN Max 1.4 1.3 1.3 Load %Max Efficiency @FL (%) 11 9 8 69 71 70 Murata Power Solutions, Inc. makes no representation that the use of its products in the circuits described herein, or the use of other technical information contained herein, will not infringe upon existing or future patent rights. The descriptions contained herein do not imply the granting of licenses to make, use, or sell equipment constructed in accordance therewith. Specifications are subject to change without notice. © 2009 Murata Power Solutions, Inc. www.murata-ps.com/dpm email: [email protected], tel: +1 800 233-2765 08/17/09 MPM_DPM-1Watt.B01 Page 1 of 1