UNISONIC TECHNOLOGIES CO., LTD BTA04 TRIAC SENSITIVE GATE TRIAC DESCRIPTION The UTC BTA04 is a 4A triac, it uses UTC’s advanced technology to provide customers with high commutation performances and voltage insulated tab, etc. The UTC BTA04 is suitable for inductive loads, general purpose AC switching and an ON/OFF function in applications such as induction motor starting circuits, for phase control operation in light dimmers and static relays, etc. FEATURES * Low gate trigger current * Low holding current SYMBOL MT2 G MT1 ORDERING INFORMATION Ordering Number Lead Free Halogen Free BTA04L-x-x-TF3-T BTA04G-x-x-TF3-T BTA04L-x-x-TF3-T Package TO-220F Pin Assignment 1 2 3 MT1 MT2 G Packing Tube (1)Packing Type (1) T: Tube (2)Package Type (2) TF3: TO-220F (3)Sensitivity (3) refer to SENSITIVITY AND TYPE (4)Voltage (4) 4: 400V, 6: 600V, 7: 700V, 8: 800V (5)Green Package (5) L: Lead Free, G: Halogen Free and Lead Free SENSITIVITY AND TYPE PART NUMBER A S D T ◎: Available 400V ◎ ◎ VOLTAGE 600V 700V ◎ ◎ 800V ◎ ◎ ◎ ◎ www.unisonic.com.tw Copyright © 2015 Unisonic Technologies Co., Ltd SENSITIVITY TYPE 10mA 10mA 5mA 5mA STANDARD STANDARD STANDARD STANDARD 1 of 5 QW-R401-034.F BTA04 TRIAC MARKING UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw 2 of 5 QW-R401-034.F BTA04 TRIAC ABSOLUTE MAXIMUM RATINGS PARAMETER RMS On-State Current (360° Conduction Angle) Non Repetitive Surge Peak On-State Current (TJ initial=25°C) TC=90°C tp=8.3ms SYMBOL RATINGS UNIT IT(RMS) 4 A 42 A ITSM 40 A tp=10ms I2t Value tp=10ms I2 t 8 A2s Critical Rate of Rise of On-State Current: Repetitive F=50Hz 10 A/µs dI/dt IG=50mA, dIG/dt=0.1A/µs Non Repetitive 50 A/µs 400 T/A 400 V Repetitive Peak Off-State Voltage 600 T/D 600 V VDRM/VRRM (TJ=110°C) 700 T/S 700 V 800 V 800 T/S Peak Gate Current tp=20µs IGM 4 A Peak Positive Gate Voltage tp=20µs VGM 16 V Peak Positive Gate Power Dissipation tp=20µs PGM) 40 W Average Gate Power Dissipation PG(AV) 1 W Operating Junction Temperature TJ -40~+110 °C Storage Junction Temperature TSTG -40~+150 °C Note: Absolute maximum ratings are those values beyond which the device could be permanently damaged. Absolute maximum ratings are stress ratings only and functional device operation is not implied. THERMAL RESISTANCES PARAMETER Junction to Ambient Junction to Case for 360° Conduction Angle (F=50Hz) (AC) Junction to Case (DC) UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw SYMBOL θJA θJC RATINGS 60 3.3 4.4 UNIT °C/W °C/W °C/W 3 of 5 QW-R401-034.F BTA04 TRIAC ELECTRICAL CHARACTERISTICS PARAMETER SYMBOL Gate Trigger Current Gate Trigger Voltage Gate Non-Trigger Voltage Time Gate Trigger Holding Current (Note 1) Latching Current IGT VGT VGD tGT TEST CONDITIONS VD=12V (DC) RL=33Ω TJ=25°C VD=VDRM, RL=3.3kΩ, TJ=110°C VD=VDRM, IG=40mA, dIG/dt=0.5A/µs, TJ=25°C I-II-III IV T D S A UNIT MIN TYP MAX MIN TYP MAX MIN TYP MAX MIN TYP MAX 5 5 10 10 mA 5 10 10 25 mA ALL ALL 1.5 0.2 ALL IH IT=100mA, Gate Open, TJ=25°C IL IG=1.2IGT, TJ=25°C I-III-IV II 1.5 0.2 2 0.2 2 15 10 20 1.5 www.unisonic.com.tw 0.2 2 15 10 20 Peak On-State ITM=5.5A, tp=380μs, VTM 1.65 1.65 Voltage TJ=25°C (Note 1) Repetitive IDRM VDRM Rated, TJ=25°C 0.01 0.01 Peak Off-State IRRM VRRM Rated, TJ=110°C 0.75 0.75 Current Critical Rate Linear Slope up to of Rise of dV/dt VD=67%VDRM, Gate Off-State 10 10 10 Voltage Open, TJ=110°C (Note 1) Critical Rate of Rise of (dI/dt)c=1.8A/ms, Off-State (dV/dt)c 1 1 TJ=110°C Voltage at Commutation (Note 1) Note: For either polarity of electrode MT2 voltage with reference to electrode MT1. UNISONIC TECHNOLOGIES CO., LTD 1.5 V 2 25 20 40 mA mA mA 1.65 1.65 0.01 0.01 mA 0.75 0.75 mA 10 5 µs 25 20 40 V V V/µs 5 V/µs 4 of 5 QW-R401-034.F BTA04 TRIAC TYPICAL CHARACTERISTICS UTC assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all UTC products described or contained herein. UTC products are not designed for use in life support appliances, devices or systems where malfunction of these products can be reasonably expected to result in personal injury. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. The information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed without notice. UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw 5 of 5 QW-R401-034.F