Datasheet

UNISONIC TECHNOLOGIES CO., LTD
L6132
LINEAR INTEGRATED CIRCUIT
GENERAL PURPOSE, LOW
VOLTAGE, RAIL-TO-RAIL
OUTPUT OPERATIONAL
AMPLIFIERS

DESCRIPTION
The UTC L6132 is a dual op amp with low supply current and low
voltage (2.7-5.5V). It brings nice performance to low voltage and low
power systems. With a 1MHz unity-gain frequency. The UTC L6132
has a guaranteed 1 V/µs slew rate and low supply current. It
provides heavy rail-to-rail (R-to-R) output swing loads and the input
common-mode voltage range including ground. Besides, it is also
capable for comfortably driving large capacitive loads.
The UTC L6132 has bipolar input and CMOS output for improved
noise performance and higher output current drive. It’s the most cost
effective solution for the applications where low voltage operation,
space saving and low price are required.

FEATURES
* 2.7V and 5V Performance Guaranteed
* No Crossover Distortion
* 210µA Low Supply Current
* Rail-to-Rail Output Swing
@10kΩ Load V+ -10mV
V- +65mV
* VCM From -0.2V to V+ -0.8V

ORDERING INFORMATION
Ordering Number
L6132G-S08-R
L6132G-K08-2020-R
Package
SOP-8
DFN-8(2X2)
Packing
Tape Reel
Tape Reel
L6132G-S08-R

(1)Packing Type
(1) R: Tape Reel
(2)Package Type
(2) S08: SOP-8, K08-2020: DFN-8(2×2)
(3)Green Package
(3) G: Halogen Free and Lead Free
MARKING
SOP-8
DFN-8(2X2)
6132
Date Code
www.unisonic.com.tw
Copyright © 2014 Unisonic Technologies Co., Ltd
1 of 11
QW-R105-045.D
L6132
LINEAR INTEGRATED CIRCUIT

PIN CONFIGURATION

PIN DESCRIPTION
PIN NO.
1
2
3
4
5
6
7
8

PIN NAME
OUTA
-
IN A
IN A+
-
V
+
IN B
-
IN B
OUT B
V+
DESCRIPTION
Output for Channel 1
Negative Input for Channel 1
Positive Input for Channel 1
Supply Output Voltage
Positive Input for Channel 2
Negative Input for Channel 2
Output for Channel 2
Supply Input Voltage
BLOCK DIAGRAM
UNISONIC TECHNOLOGIES CO., LTD
www.unisonic.com.tw
2 of 11
QW-R105-045.D
L6132

LINEAR INTEGRATED CIRCUIT
ABSOLUTE MAXIMUM RATINGS (Note1)
PARAMETER
Supply Voltage
Supply Voltage (V+- V-)
RATINGS
UNIT
2.7~5.5
V
5.5
V
Differential Input Voltage
±Supply Voltage
V+
(Note 2)
Output Short Circuit
IO(SC)
V-
(Note 3)
Infrared (15 sec)
215
C
Junction Temperature
TJ
+150
C
Operation Temperature
TOPR
-40~+85
C
Storage Temperature
TSTG
-65~+150
C
Notes: 1. Absolute maximum ratings are those values beyond which the device could be permanently damaged.
Absolute maximum ratings are stress ratings only and functional device operation is not implied.
2. Shorting output to V+ will adversely affect reliability
3. Shorting output to V- will adversely affect reliability

SYMBOL
VSS
VSS
VI(DIFF)
THERMAL INFORMATION (Note)
PARAMETER
SYMBOL
RATINGS
SOP-8
250
Junction to Ambient
θJA
DFN-8(2X2)
155
SOP-8
140
Junction to Case
θJC
DFN-8(2X2)
20
Note: θJA is measured in the natural convection at TA=25°C on a low effective thermal conductivity test
JEDEC 51-3 thermal measurement standard.

UNIT
°C/W
°C/W
°C/W
°C/W
board of
ELECTRICAL CHARACTERISTICS (FOR 2.7V)
All limits guaranteed for TJ=25C, V+=2.7V, V-=0V, VCM=1.0V, VOUT =V+/2 and RL>1MΩ, unless otherwise specified.
PARAMETER
DC CHARACTERISTICS
Input Offset Voltage
Input Common Mode Voltage Range
Output Swing
Input Offset Voltage Average Drift
Input Bias Current
Input Offset Current
Common Mode Rejection Ratio
Power Supply Rejection Ratio
Supply Current
AC CHARACTERISTICS
Gain Bandwidth Product
Phase Margin
Gain Margin
SYMBOL
CONDITIONS
MIN
VOS
VCM
VOUT
TCVos
II(BIAS)
II(OFF)
CMRR
PSRR
ISS
GBWP
Φm
Gm
For CMRR≥50dB
RL=10kΩ to 1.35V
0V≤VCM≤1.7V
2.7V≤V+ ≤5V, VOUT=1V
Both amplifiers
0
V+-100
50
50
TYP
MAX
UNIT
1.7
-0.2
1.9
V+-10
60
5
11
5
63
60
140
6
mV
V
V
mV
mV
µV/C
nA
nA
dB
dB
µA
CL=200pF
1
60
10
Input Referred Voltage Noise
eN
F=1KHz
46
Input Referred Current Noise
in
F=1KHz
0.17
UNISONIC TECHNOLOGIES CO., LTD
www.unisonic.com.tw
1.7
180
250
50
340
MHz
Deg
dB
nV
 Hz
pA
 Hz
3 of 11
QW-R105-045.D
L6132

LINEAR INTEGRATED CIRCUIT
ELECTRICAL CHARACTERISTICS (FOR 5V)
All limits guaranteed for TJ=25C, V+=5V, V-=0V, VCM=2.0V, VOUT=V+/2 and RL>1MΩ, unless otherwise specified.
PARAMETER
SYMBOL
CONDITIONS
MIN
TYP
MAX
UNIT
DC CHARACTERISTICS
Input Offset Voltage
VOS
1.7
6
mV
0
-0.2
V
Input Common-Mode Voltage Range
VCM
For CMRR≥50dB
4.2
4
V
+
+
mV
VOH V -300 V -40
RL=2KΩ to 2.5V
VOL
120
300
mV
Output Swing
VOUT
+
+
mV
VOH V -100 V -10
RL=10KΩ to 2.5V
VOL
65
180
mV
Input Offset Voltage Average Drift
TCVos
5
µV/C
Input Bias Current
II(BIAS)
15
250
nA
Input Offset Current
II(OFF)
5
50
nA
Common Mode Rejection Ratio
CMRR 0V≤VCM≤4V
50
65
dB
+
2.7V≤V ≤5V
50
60
dB
Power Supply Rejection Ratio
PSRR
VOUT=1V, VCM=1V
Large Signal Voltage Gain (Note 1)
GV
RL=2KΩ
15
100
V/mV
10
230
mA
Sourcing, VOUT =0V
Output Short Circuit Current
IOUT
Sinking, VOUT =5V
30
160
mA
Supply Current
ISS
Both Amplifiers
210
440
µA
AC CHARACTERISTICS
Slew Rate
SR
(Note 2)
1
V/µs
Gain Bandwidth Product
GBWP CL=200pF
1
MHz
Φm
60
Deg
Phase Margin
Gm
Gain Margin
10
dB
nV
eN
Input Referred Voltage Noise
f=1KHz
39
 Hz
pA
in
Input Referred Current Noise
f=1KHz
0.21
 Hz
Notes: 1. RL is connected to V-. The output voltage is 0.5V≤VOUT≤4.5V.
2. Connected as voltage follower with 3V step input. Number specified is these lower of the positive and
negative slew rates
UNISONIC TECHNOLOGIES CO., LTD
www.unisonic.com.tw
4 of 11
QW-R105-045.D
L6132
LINEAR INTEGRATED CIRCUIT
INTERNAL SIMPLE CIRCUIT

VCC
IN-
OUT
IN+

TEST CIRCUIT FOR STABILITY VS CAPACITIVE LOAD
UNISONIC TECHNOLOGIES CO., LTD
www.unisonic.com.tw
5 of 11
QW-R105-045.D
L6132
Output Impedance from Supply Voltage
(mV)
TYPICAL CHARACTERISTICS
ISINK (mA)
ISINK (mA)
ISOURCT (mA)
ISOURCT (mA)
Suply Current, ISS (µA)

LINEAR INTEGRATED CIRCUIT
UNISONIC TECHNOLOGIES CO., LTD
www.unisonic.com.tw
6 of 11
QW-R105-045.D
L6132
TYPICAL CHARACTERISTICS(Cont.)
VSS = ±1.35V
0.8
0.6
0.4
0.4
AVOS (mV)
0.6
0.2
0.0
-0.2
-0.2
-0.6
-0.6
-0.8
-0.8
-1.0
0
-0.5
1
-1.5 -1
0.5
1.5
Input Common Mode Voltage Range,
VCM (V)
-1.0
Gain and Phase vs. Capacitive Load
50
80
40
PHASE
30
60
GAIN
40
10
20
0
0
-10
Vs=+5V, RL=600Ω, single
supply, TA=25°С,CL=0
-20
10k
100k
1M
10M
-2
-1
0
1
2
3
Input Common Mode Voltage Range,
VCM (V)
Gain and Phase vs. Capacitive Load
80
PHASE
30
10
20
0
0
-20
-10
-40
-20
10k
50
80
40
Gain(dB)
60
GAIN
40
10
20
0
0
-10
Vs=+5V, RL=600Ω, single
supply, TA=25°С, CL=500pF
-20
10k
1M
100k
Frequency(Hz)
100k
1M
-40
10M
10M
Gain and Phase vs. Capacitive Load
100
80
PHASE
60
GAIN
20
40
10
20
0
0
-20
-10
-40
-20
10k
UNISONIC TECHNOLOGIES CO., LTD
www.unisonic.com.tw
-20
Vs=+5V, RL=600Ω, single
supply, TA=25°С,CL=100pF
30
Gain(dB)
PHASE
Phase Margin(Deg)
100
40
20
40
Frequency(Hz)
Gain and Phase vs. Capacitive Load
30
60
GAIN
20
Frequency(Hz)
50
100
-20
Vs=+5V, RL=600Ω, single
supply, TA=25°С, CL=1000pF
1M
100k
Frequency(Hz)
Phase Margin(Deg)
20
-3
100
40
Gain(dB)
0.0
-0.4
50
VSS = ±2.5V
0.2
-0.4
Gain(dB)
AVOS (mV)
0.8
ΔVOS vs CMR
1.0
Phase Margin(Deg)
ΔVOS vs CMR
1.0
Phase Margin(Deg)

LINEAR INTEGRATED CIRCUIT
10M
-40
7 of 11
QW-R105-045.D
L6132
LINEAR INTEGRATED CIRCUIT
TYPICAL CHARACTERISTICS(Cont.)

Stability vs Capacitive Load
VSS = ±2.5V
25% Overshoot
AV = +10
RL = 2kΩ
1000 VOUT = 100mVPP
Capacitive Load (pF)
Capacitive Load (pF)
100
10
-2 -1.5 -1 -0.5
0
0.5
1
Stability vs Capacitive Load
VSS = ±2.5V
25% Overshoot
AV = +10
RL = 1MΩ
1000 VOUT = 100mVPP
10000
10000
1.5
100
10
2
-2 -1.5 -1 -0.5 0 0.5 1 1.5
Output Voltage,VOUT (V)
Output Voltage, VOUT (V)
240
Short Circuit Current vs Temperature
(Sourcing)
200
180
Short Circuit Current (mA)
Short Circuit Current (mA)
Short Circuit Current vs Temperature
(Sinking)
VSS = 5V
180
210
VSS = 5V
150
120
VSS = 2.7V
90
60
30
160
140
120
100
80
60
40
20
0
-40
-20
0
40
20
60
Temperature (°С)
0
-40
80
2
VSS = 2.7V
-20
20
60
0
40
Temperature (°С)
80
Slew Rate vs Supply Voltage
1.5
Sles Rate (V/µs)
Vs=+5V, RL=10kΩ,
1.4 AV=+1, VIN=1Vpp,
1.3 single supply, TA=25°С
1.2
1.1
Rising Edge
1.0
0.9
Failing Edge
0.8
0.7
0.6
0.5
2.5
3.0
3.5
4.0
4.5
5.0
Supply Voltage (V)
UNISONIC TECHNOLOGIES CO., LTD
www.unisonic.com.tw
8 of 11
QW-R105-045.D
L6132
TYPICAL CHARACTERISTICS(Cont.)
Non-Inverting Large Signal Pulse
Response
Non-Inverting Large Signal Pulse
Response
TA = 25°С
Output Signal Input Signal
(1V/div)
Output Signal Input Signal
(1V/div)
TA = 85°С
Time (1µs/div)
Time (1µs/div)
Non-Inverting Large Signal Pulse
Response
Non-Inverting Small Signal Pulse
Response
TA = -40°С
Output Signal
Input Signal
(50mV/div)
Output Signal Input Signal
(1V/div)
TA = 25°С
Time (1µs/div)
Time (1µs/div)
Non-Inverting Small Signal Pulse
Response
Non-Inverting Small Signal Pulse
Response
TA = 85°С
Output Signal Input Signal
(50mV/div)
TA = -40°С
Output Signal Input Signal
(50mV/div)

LINEAR INTEGRATED CIRCUIT
Time (1µs/div)
UNISONIC TECHNOLOGIES CO., LTD
www.unisonic.com.tw
Time (1µs/div)
9 of 11
QW-R105-045.D
L6132
TYPICAL CHARACTERISTICS(Cont.)
Inverting Large Signal Pulse Response
TA = 25°С
TA = 85°С
Output Signal Input Signal
(1V/div)
Output Signal Input Signal
(1V/div)
Inverting Large Signal Pulse Response
Time (1µs/div)
Time (1µs/div)
Inverting Large Signal Pulse Response
Inverting Small Signal Pulse Response
TA = -40°С
Output Signal Input Signal
(1V/div)
Output Signal Input Signal
(50mV/div)
TA = 25°С
Time (1µs/div)
Time (1µs/div)
Inverting Small Signal Pulse Response
Inverting Small Signal Pulse Response
TA = 85°С
TA = -40°С
Output Signal Input Signal
(50mV/div)
Output Signal
Input Signal
(50mV/div)

LINEAR INTEGRATED CIRCUIT
Time (1µs/div)
UNISONIC TECHNOLOGIES CO., LTD
www.unisonic.com.tw
Time (1µs/div)
10 of 11
QW-R105-045.D
L6132
LINEAR INTEGRATED CIRCUIT
UTC assumes no responsibility for equipment failures that result from using products at values that
exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or
other parameters) listed in products specifications of any and all UTC products described or contained
herein. UTC products are not designed for use in life support appliances, devices or systems where
malfunction of these products can be reasonably expected to result in personal injury. Reproduction in
whole or in part is prohibited without the prior written consent of the copyright owner. The information
presented in this document does not form part of any quotation or contract, is believed to be accurate
and reliable and may be changed without notice.
UNISONIC TECHNOLOGIES CO., LTD
www.unisonic.com.tw
11 of 11
QW-R105-045.D