NTE760 Integrated Circuit FM IF Amp Description: The NTE760 is a monolithic silicon integrated circuit designed especially for 10.7MHz IF applications. Features: D High Stable Gain at 10.7MHz (40dB typ) D Low Feedback Capacitance (|y12| = 0.01mmho typ) D Non−Saturating Limiting (With Suitable Load) Absolute Maximum Ratings: (TA = +25°C unless otherwise specified) Power Supply Voltage, V+ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20V Output Collector Voltage, V4 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20V Input Voltage, V2, V5 (Note 1) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ±5.0V Power Dissipation (TA = +25°C, Package Limitation), PD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1W Derate above +25°C . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10mW/°C Operating Temperature Range, TA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . −10° to +75°C Note 1 Differential Voltage Swing Electrical Characteristics: (V+ = 12 Volts, f = 10.7MHz, TA = +25°C, unless otherwise specified) Parameter Symbol Min Typ Max Unit Total Current Drain ID − − 10 mA Output Quiescent Current IQ 1.75 3.2 5.0 mA Output Saturation Voltage V(sat) − 3.5 − Volts Forward Transadmittance |y21| 25 − − mmhos Reverse Transadmittance |y12| − 0.01 − mmhos Input Capacitance Cin − 6.0 − pF Input Conductance Gin − 0.4 − mmho Output Capacitance Cout − 2.5 − pF Output Conductance Gout − 35 − µmhos Noise Figure (RS = 750Ω) NF − 7.0 − dB Maximum Stable Gain (Stern Factor = 3) AV − 40 − dB Input Voltage (3.0dB Limiting) ein − 60 − mV Pin Connection Diagram Input Bypass 1 6 GND IF Output Bypass 2 5 IF Input IF Output 3 4 (+) VCC .080 (2.03) BSC 6 1 5 2 4 3 .220 (5.59) .270 (6.86) .027 (0.7) .147 (3.75) .360 (9.14) 10° .640 (16.26)