HT70xxA-1 Revision # 2.20 • Modifications made on May 16, 2016 Add a new Output Delay Time parameter in the Electronic Characteristics section. Revision # 2.10 • TinyPowerTM Voltage Detector Modifications made on March 19, 2014 In the Features and other related sections, the high input voltage range of 24V was changed to 30V. • The Selection Table section was modified. • The Absolute Maximum Ratings section was modified. • The Electrical Characteristics section was modified. • The Typical Performance Characteristics were modified. • The Package Information was modified. Revision # 2.00 • Modifications made on April 30, 2013 The Selection Table section was modified. Revision # 1.90 Modifications made on December 12, 2012 • The Selection Table section was modified. • The Pin Assignment section was modified. Revision # 1.80 • Modifications made on August 8, 2012 At the Electrical Characteristics table, the operating current was modified. Revision # 1.70 Modifications made on March 21, 2012 • In the Electrical Characteristics section, the temperature coefficient (VOUT/Ta) test condition from 0°C ~ 70°C into -40°C ~ 85°C was modified. Revision # 1.60 • Modifications made on February 13, 2012 In the Features, Selection Table and other related sections, an additional SOT23 package type was added. Revision # 1.50 • Modifications made on September 30, 2008 In the Features section, the Selection Table section and other related sections, the package SOT25 name changed to SOT23-5. • The Package Information section was modified. • The Product Tape and Reel Specifications section was modified. Revision # 1.40 • HT7022A-1 all related sections was added to HT70XXA-1 data sheet. Revision # 1.30 • Modifications made on January 26, 2006 Modifications made on January 26, 2005 At the Features section, high input voltage range and output voltage accuracy features were added. • The Selection Table was modified and a Note about the package markings for the lead free devices was added. • The Output Type selection table was modified and combined with the Output Curve. Revision # 1.20 • Modifications made on June 10, 2004 At the Absolute Maximum Ratings section, the Operating Temperature range was changed from 0oC~70oC to -40oC~85oC. • Package Information section was added. • Product Tape and Reel Specifications section was added. Revision # 1.10 • Modifications made on October 15, 2003 The Pad Assignment and Pad Coordinates sections were deleted. Revision # 1.00 This was posted on August 7, 2003