NTE6088 Silicon Dual Schottky Rectifier 60V, 30 Amp, TO220 Description: The NTE6088 is a silicon dual power rectifier in a TO220 type package designed using the Schottky Barrier principle with a platinum barrier metal. Features: D Low Power Loss, High Efficiency D Guarding for Stress Protection D Low Forward Voltage D +150°C Operating Junction Temperature D High Surge Capacity Absolute Maximum Ratings: (TA = +25°C unless otherwise specified) Peak Repetitive Reverse Voltage, VRRM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60V Working Peak Reverse Voltage, VRWM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60V DC Blocking Voltage, VR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60V Average Rectified Forward Current (TC = +125°C), IF(AV) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30A Peak Repetitive Forward Current, IFRM (Per Diode Leg, VR = 60V, Square Wave, 20kHz, TC = +125°C) . . . . . . . . . . . . . . . . . . . . 30A Non−Repetitive Peak Surge Current, IFSM (8.3ms Single Half Sinewave Superimposed on Rated Load) . . . . . . . . . . . . . . . . . . . . . . 150A Peak Repetitive Reverse Current (2μs, 1kHz), IRRM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0.5A Operating Junction Temperature Range, TJ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . −65° to +150°C Storage Temperature Range, Tstg . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . −65° to +175°C Voltage Rate of Change (VR = 60V), dv/dt . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1000V/μs Typical Thermal Resistance (Per Leg), Junction−to−Case, RthJC . . . . . . . . . . . . . . . . . . . . . . 1.5°C/W Electrical Characteristics (Per Leg): (TA = +25°C unless otherwise specified) Parameter Instantaneous Forward Voltage Instantaneous Reverse Current Symbol vF iR Test Conditions Min Typ Max Unit IF = 15A − − 0.75 V IF = 15A, TC = +125°C, Note 1 − − 0.65 V VR = 60V, TC = +25°C, Note 1 − − 1 mA VR = 60V, TC = +125°C, Note 1 − − 50 mA Note 1. Pulse Test: Pulse Width = 300μs, Duty Cycle ≤ 2%. .147 (3.75) Dia Max .185 (4.7) .054 (1.38) .392 (9.95) .110 (2.79) .245 (6.22) .269 (6.83) Max K .6.08 (15.42) Max .040 (1.02) A K A .500 (12.7) Min .100 (2.54) .018 (0.48)