TAI-SAW TECHNOLOGY CO., LTD. No. 3, Industrial 2nd Rd., Ping-Chen Industrial District, Taoyuan, 324, Taiwan, R.O.C. TEL: 886-3-4690038 FAX: 886-3-4697532 E-mail: [email protected] Web: www.taisaw.com Product Specifications Approval Sheet Product Description: SAW Filter 806 MHz Band 20 Rx SMD 1.4X1.1 mm (BW=30 MHz) TST Part No.: TA1953A Customer Part No.: Customer signature required Company: Division: Approved by : Date: Checked by: Hayley Chou Approved by: Andy Yu Date: 2015/12/28 1. Customer signed back is required before TST can proceed with sample build and receive orders. 2. Orders received without customer signed back will be regarded as agreement on the specifications. 3. Any specifications changes must be approved upon by both parties and a new revision of specifications shall be released to reflect the changes. TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document FR-71S03-02 TAI-SAW TECHNOLOGY CO., LTD. No. 3, Industrial 2nd Rd., Ping-Chen Industrial District, Taoyuan, 324, Taiwan, R.O.C. TEL: 886-3-4690038 FAX: 886-3-4697532 E-mail: [email protected] Web: www.taisaw.com SAW Filter 806 MHz Band 20 Rx SMD 1.4X1.1 mm (BW=30 MHz) MODEL NO.:TA1953A REV. NO.:1 A. MAXIMUM RATING: 1. Maximum Input Power: 10 dBm 2. Operating Temperature: -20 °C to +85 °C 3. Storage Temperature: -40 °C to +85 °C RoHS Compliant Lead free Lead-free soldering Electrostatic Sensitive Device (ESD) B. ELECTRICAL CHARACTERISTICS: Terminating source impedance: Zs = 50 Ω (Single-ended) Terminating load impedance: ZL = 50 Ω (Single-ended) Parameters Description Unit Min. Typ. Max. MHz - 806 - dB - 2.5 3.8 dBp-p - 1.3 2.5 791~821 MHz - - 2.0 2.3 Output 791~821 MHz - - 2.0 2.3 832.0 ~ 862.0 MHz dB 37 41 - 1559.0 ~ 1607.0 MHz dB 40 47 - 1582.0 ~ 1642.0 MHz dB 40 46 - 2373.0 ~ 2463.0 MHz dB 30 38 - 2400.0 ~ 2500.0 MHz dB 30 37 - 3164.0 ~ 3284.0 MHz dB 20 33 - 3955.0 ~ 4105.0 MHz dB 20 30 - 4746.0 ~ 4926.0 MHz dB 20 28 - 5537.0 ~ 5747.0 MHz dB 20 26 - 6328.0 ~ 6568.0 MHz dB 15 25 - 7119.0 ~ 7389.0 MHz dB 15 24 - Center Frequency Insertion Loss 791~821 MHz Amplitude Ripple 791~821 MHz VSWR Input Attenuation: Notes: (1) No Matching Network. TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document 2 C. FREQUENCY CHARATERISTIC: Frequency Response TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document 3 VSWR Ripple TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document 4 Smith Chart TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document 5 D. MEASUREMENT CIRCUIT: E. OUTLINE DRAWING: SMF XYY Marking Descriptions Pin Description S Series Number 1 B, C, E Ground MF Series Number 2 A Input X YY Date Code(Year+Month) Lot No D Output TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document 6 Top View (Sample Production): Top View (Mass Production): Date Code TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document 7 F. PACKING: 1. REEL DIMENSION 2. TAPE DIMENSION TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document 8 G. RECOMMENDED TEMPERATURE PROFILE OF REFLOW SOLDERING: 1. Preheating shall be fixed at 150~180℃ for 60~90 seconds. 2. Ascending time to preheating temperature 150℃ shall be 30 seconds min. 3. Heating shall be fixed at 220℃ for 50~80 seconds and at 260℃+0/-5℃ peak (20~40sec). 4. Time: 2 times. TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document 9