TAI-SAW TECHNOLOGY CO., LTD. No. 3, Industrial 2nd Rd., Ping-Chen Industrial District, Taoyuan, 324, Taiwan, R.O.C. TEL: 886-3-4690038 FAX: 886-3-4697532 E-mail: [email protected] Web: www.taisaw.com Product Specifications Approval Sheet Product Description: SAW Duplexer 718/773 MHz Band 28 SMD 2.0X1.6 mm (BW=30 MHz) TST Part No.: TF0112A Customer Part No.: Customer signature required Company: Division: Approved by : Date: Checked by: Hayley Chou Approved by: Andy Yu Date: 2015/12/28 1. Customer signed back is required before TST can proceed with sample build and receive orders. 2. Orders received without customer signed back will be regarded as agreement on the specifications. 3. Any specifications changes must be approved upon by both parties and a new revision of specifications shall be released to reflect the changes. TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document FR-71S03-02 TAI-SAW TECHNOLOGY CO., LTD. No. 3, Industrial 2nd Rd., Ping-Chen Industrial District, Taoyuan, 324, Taiwan, R.O.C. TEL: 886-3-4690038 FAX: 886-3-4697532 E-mail: [email protected] Web: www.taisaw.com SAW Duplexer 718/773 MHz Band 28 SMD 2.0X1.6 mm (BW=30 MHz) MODEL NO.:TF0112A REV.1.0 A. MAXIMUM RATING: RoHS Compliant 1. Input Power at Tx Port: 29 dBm, Ta=+50 ℃, 50 kh, CW dBm Lead free Lead-free soldering 2. Maximum DC Voltage: 0 V 3. Operating Temperature: -20 °C to +85 °C Electrostatic Sensitive Device (ESD) 4. Storage Temperature Range: -40 °C to +85 °C B. ELECTRICAL CHARACTERISTICS: Terminating impedance (Tx Port) (1): 50+12nH (Q=∞) (Single) Terminating impedance (Rx Port): 50 Ω (Single) Terminating impedance (Ant Port) (1): 50 // 10nH Ω (Q=∞) (Single) Tx to ANT Parameters Description Unit Minimum Typical Maximum Insertion Loss 703.0~733.0 MHz dB - 1.8 3.0 Amplitude Ripple 703.0~733.0 MHz dBp-p - 0.8 2.5 - - 2.0 2.3 - - 2.0 2.3 10.0~694.0 MHz 694.0~698.0 MHz 758.0~788.0 MHz 788.0~803.0 MHz dB dB dB dB 33 2.5 47 30 38 16 52 43 - 1406.0~1466.0 MHz 1565.0~1606.0 MHz 2109.0~2199.0 MHz dB dB dB 35 45 45 46 52 58 - 2400.0~2500.0 MHz dB 45 56 - VSWR ANT Tx 703.0~733.0 MHz Attenuation TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document 2 ANT to Rx Parameters Description Insertion Loss 758.0~788.0 MHz Amplitude Ripple 758.0~788.0 MHz ANT VSWR 758.0~788.0 MHz Rx Attenuation 703.0~733.0 MHz 2400.0~2500.0 MHz Unit Minimum Typical Maximum dB - 2.3 2.8 dBp-p - - 0.7 1.8 1.6 2.2 - - 2.1 2.4 dB dB 50 45 60 51 - Unit dB dB Minimum Typical Maximum 56 50 60 53 - Tx to Rx Parameters Description 703.0~733.0 MHz 758.0~788.0 MHz Notes: (1) With Matching Network. Isolation TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document 3 C. FREQUENCY CHARACTERISTICS: Tx to Ant Ant to Rx TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document 4 Isolation Ripple TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document 5 VSWR (Tx Port) Smith Chart (Tx Port) TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document 6 VSWR (Rx Port) Smith Chart (Rx Port) TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document 7 VSWR (ANT Port) Smith Chart (ANT Port) TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document 8 Wide Span Tx Rx Tx to Rx TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document 9 D. MEASUREMENT CIRCUIT: E.OUTLINE DRAWIN: SY6 XYY Marking Descriptions S Series Number 1 Y6 Series Number 2 X Date Code(Year+Month) YY Lot No Pin Description B,D,E,G,H,J Ground F Ant C Tx (718.0MHz) A Rx (773.0MHz) Date Code 10 TAI-SAW TECHNOLOGYTST CO., LTD. DCC Release document F. PACKING: 1. REEL DIMENSION 2. TAPE DIMENSION 11 TAI-SAW TECHNOLOGYTST CO., LTD. DCC Release document G. RECOMMENDED REFLOW PROFILE: 1. Preheating shall be fixed at 150~180℃ for 60~90 seconds. 2. Ascending time to preheating temperature 150℃ shall be 30 seconds min. 3. Heating shall be fixed at 220℃ for 50~80 seconds and at 260℃+0/-5℃ peak (20~40sec). 4. Time: 2 times. 12 TAI-SAW TECHNOLOGYTST CO., LTD. DCC Release document