TF0113A

TAI-SAW TECHNOLOGY CO., LTD.
No. 3, Industrial 2nd Rd., Ping-Chen Industrial District,
Taoyuan, 324, Taiwan, R.O.C.
TEL: 886-3-4690038
FAX: 886-3-4697532
E-mail: [email protected]
Web: www.taisaw.com
Product Specifications Approval Sheet
Product Description: SAW Duplexer 733/788 MHz Band 28 SMD 2.0X1.6 mm (BW=30 MHz)
TST Part No.: TF0113A
Customer Part No.:
Customer signature required
Company:
Division:
Approved by :
Date:
Checked by:
Hayley Chou
Approved by:
Andy Yu
Date:
2015/12/28
1. Customer signed back is required before TST can proceed with sample build and receive orders.
2. Orders received without customer signed back will be regarded as agreement on the specifications.
3. Any specifications changes must be approved upon by both parties and a new revision of specifications
shall be released to reflect the changes.
TAI-SAW TECHNOLOGY CO., LTD.
TST DCC
Release document
FR-71S03-02
TAI-SAW TECHNOLOGY CO., LTD.
No. 3, Industrial 2nd Rd., Ping-Chen Industrial District,
Taoyuan, 324, Taiwan, R.O.C.
TEL: 886-3-4690038
FAX: 886-3-4697532
E-mail: [email protected]
Web: www.taisaw.com
SAW Duplexer 733/788 MHz Band 28 SMD 2.0X1.6 mm (BW=30 MHz)
MODEL NO.:TF0113A
REV.1.0
A. MAXIMUM RATING:
RoHS Compliant
1. Input Power at Tx Port: 29 dBm, Ta=+50 ℃, 50 kh, CW dBm
Lead free
Lead-free
soldering
2. Maximum DC Voltage: 0 V
3. Operating Temperature: -20 °C to +85 °C
Electrostatic Sensitive Device (ESD)
4. Storage Temperature Range: -40 °C to +85 °C
B. ELECTRICAL CHARACTERISTICS:
Terminating impedance (Tx Port): 50+12nH (Q=∞) (Single)
Terminating impedance (Rx Port): 50 Ω (Single)
Terminating impedance (Ant Port): 50 // 10nH (Q=∞) (Single)
Tx to ANT
Parameters Description
Unit
Minimum
Typical
Maximum
Insertion Loss
718.0~748.0 MHz
dB
-
1.8
2.8
Amplitude Ripple
718.0~748.0 MHz
dBp-p
-
0.9
2.3
-
-
1.9
2.3
-
-
1.9
2.3
10.0~698.0 MHz
dB
33
38
-
698.0~710.0 MHz
758.0~773.0 MHz
773.0~803.0 MHz
dB
dB
dB
10
20
47
50
43
53
-
1436.0~1496.0 MHz
1565.0~1606.0 MHz
2154.0~2244.0 MHz
dB
dB
dB
35
40
45
47
51
57
-
2400.0~2500.0 MHz
dB
45
56
-
VSWR
ANT
Tx 718.0~748.0 MHz
Attenuation
TAI-SAW TECHNOLOGY CO., LTD.
TST DCC
Release document
2
ANT to Rx
Parameters Description
Unit
Minimum
Typical
Maximum
dB
-
2.4
2.9
dBp-p
-
-
0.8
1.7
1.7
2.2
-
-
2.0
2.4
dB
dB
50
45
59
50
-
718.0~748.0 MHz
dB
56
60
-
773.0~803.0 MHz
Notes: (1) With Matching Network.
dB
50
54
-
Insertion Loss
773.0~803.0 MHz
Amplitude Ripple
773.0~803.0 MHz
ANT
VSWR
773.0~803.0 MHz
Rx
Attenuation
718.0~748.0 MHz
2400.0~2500.0 MHz
Tx to Rx
Isolation
TAI-SAW TECHNOLOGY CO., LTD.
TST DCC
Release document
3
C. FREQUENCY CHARACTERISTICS:
Tx to Ant
Ant to Rx
TAI-SAW TECHNOLOGY CO., LTD.
TST DCC
Release document
4
Isolation
Ripple
TAI-SAW TECHNOLOGY CO., LTD.
TST DCC
Release document
5
VSWR (Tx Port)
Smith Chart (Tx Port)
TAI-SAW TECHNOLOGY CO., LTD.
TST DCC
Release document
6
VSWR (Rx Port)
Smith Chart (Rx Port)
TAI-SAW TECHNOLOGY CO., LTD.
TST DCC
Release document
7
VSWR (ANT Port)
Smith Chart (ANT Port)
TAI-SAW TECHNOLOGY CO., LTD.
TST DCC
Release document
8
Wide Span
Tx
Rx
Tx to Rx
TAI-SAW TECHNOLOGY CO., LTD.
TST DCC
Release document
9
D. MEASUREMENT CIRCUIT:
E.OUTLINE DRAWIN:
SY9
XYY
Marking Descriptions
S
Series Number 1
Y9
Series Number 2
X
Date Code(Year+Month)
YY
Lot No
Pin Description
B,D,E,G,H,J
Ground
F
Ant
C
Tx (733.0MHz)
A
Rx (788.0MHz)
Date Code
10
TAI-SAW TECHNOLOGY CO.,
LTD.DCC
TST
Release document
F. PACKING:
1. REEL DIMENSION
2. TAPE DIMENSION
11
TAI-SAW TECHNOLOGY CO.,
LTD.DCC
TST
Release document
G. RECOMMENDED REFLOW PROFILE:
1. Preheating shall be fixed at 150~180℃ for 60~90 seconds.
2. Ascending time to preheating temperature 150℃ shall be 30 seconds min.
3. Heating shall be fixed at 220℃ for 50~80 seconds and at 260℃+0/-5℃ peak (20~40sec).
4. Time: 2 times.
12
TAI-SAW TECHNOLOGY CO.,
LTD.DCC
TST
Release document