TA0574B

TAI-SAW TECHNOLOGY CO., LTD.
No. 3, Industrial 2nd Rd., Ping-Chen Industrial District,
Taoyuan, 324, Taiwan, R.O.C.
TEL: 886-3-4690038
FAX: 886-3-4697532
E-mail: [email protected]
Web: www.taisaw.com
Product Specification Approval Sheet
Product Name: SAW Filter 180.175 MHz SMD 5X5 mm(BW=6MHz)
TST Parts No.: TA0574B
Customer Parts No.:
Customer signature required
Company:
Division:
Approved by :
Date:
Checked by:
Anne Chen
Approved by:
Bob Chau
Date:
02, 23, 2016
1. Customer signed back is required before TST can proceed with sample build and receive orders.
2. Orders received without customer signed back will be regarded as agreement on the specifications.
3. Any specifications changes must be approved upon by both parties and a new revision of specifications
shall be released to reflect the change
TAI-SAW TECHNOLOGY CO., LTD.
TST DCC
Release document
FR-71S03-02
TAI-SAW TECHNOLOGY CO., LTD.
No. 3, Industrial 2nd Rd., Ping-Chen Industrial District,
Taoyuan, 324, Taiwan, R.O.C.
TEL: 886-3-4690038
FAX: 886-3-4697532
E-mail: [email protected]
Web: www.taisaw.com
SAW Filter 180.175 MHz
MODEL NO.: TA0574B
REV. NO.: 1
RoHS Compliant
Lead free
Lead-free soldering
A. MAXIMUM RATING:
1.Input Power Level: 10 dBm
2.DC voltage: 5 V
Electrostatic Sensitive Device (ESD)
3.Operating Temperature: -40C to +85C
4.Storage Temperature: -40C to +85C
B. ELECTRICAL CHARACTERISTICS:
Item
Unit
Center Frequency
Fc
Insertion Loss
ILmin (reference level)
Bandwidth
BW-3dB
Absolute Attenuation(reference to ILmindB)
Fc-50 ~ Fc-30
Fc-30 ~ Fc-15
Fc+30 ~ Fc+100
Source impedance
Load impedance
MHz
MHz
MHz
Zs
ZL
Specification
Min.
Typ.
Max.
MHz
dB
MHz
6
180.175
1.55
8.9
2.8
-
dB
dB
dB


42
36
42
-
55
52
46
50
50
-
Note: ILmin is the minimum of the pass band attenuation. The center frequency Fc is the mean value of
the upper and lower frequencies at the 3dB filter attenuation level relative to the ILmin.
C. MEASUREMENT CIRCUIT:
TAI-SAW TECHNOLOGY CO., LTD.
TST DCC
Release document
2
D. Frequency Characteristics :
TAI-SAW TECHNOLOGY CO., LTD.
TST DCC
Release document
3
E.OUTLINE DRAWING:
574
△
□ Date code: Provided by planer each year
△ Product Year Code
Year
2013
2017
2014
2018
2015
2019
2016
2020
Product Code
A
a
A
a
F.PCB FOOTPRINT:
G. PACKING:
TAI-SAW TECHNOLOGY CO., LTD.
TST DCC
Release document
4
1. REEL DIMENSION
(Please refer to FR-75D10 for packing quantity)
2. TAPE DIMENSION
574
T △□
574
T △□
Direction of Feed
TAI-SAW TECHNOLOGY CO., LTD.
TST DCC
Release document
5
H. RECOMMENDED REFLOW PROFILE :
1. Preheating shall be fixed at 150~180℃ for 60~90 seconds.
2. Ascending time to preheating temperature 150℃ shall be 30 seconds min.
3. Heating shall be fixed at 220℃ for 50~80 seconds and at 245~260℃ peak (min. 10sec).
4. Time : 2 times.
TAI-SAW TECHNOLOGY CO., LTD.
TST DCC
Release document
6