TAI-SAW TECHNOLOGY CO., LTD. No. 3, Industrial 2nd Rd., Ping-Chen Industrial District, Taoyuan, 324, Taiwan, R.O.C. TEL: 886-3-4690038 FAX: 886-3-4697532 E-mail: [email protected] Web: www.taisaw.com Product Specifications Approval Sheet Product Description: BAW DPX 2535/2655MHz 70MHz BW Band 7 SMD 2.0X1.6 mm TST Part No.: TF0116A Customer Part No.: Customer signature required Company: Division: Approved by : Date: Checked by: Hayley Chou Approved by: Andy Yu Date: 2015/07/09 1. Customer signed back is required before TST can proceed with sample build and receive orders. 2. Orders received without customer signed back will be regarded as agreement on the specifications. 3. Any specifications changes must be approved upon by both parties and a new revision of specifications shall be released to reflect the changes TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document FR-71S03-02 TAI-SAW TECHNOLOGY CO., LTD. No. 3, Industrial 2nd Rd., Ping-Chen Industrial District, Taoyuan, 324, Taiwan, R.O.C. TEL: 886-3-4690038 FAX: 886-3-4697532 E-mail: [email protected] Web: www.taisaw.com BAW DPX 2535/2655MHz 70MHz BW Balance type SMD 2.0X1.6 mm MODEL NO.:TF0116A REV.1.0 A. MAXIMUM RATING: 1. Input power (2500~2570 MHz): +29dBm, +50°C, 50khours, CW dBm 2. Operating Temperature: -20°C to +85°C RoHS Compliant Lead free Lead-free soldering B. ELECTRICAL CHARACTERISTICS: Electrostatic Sensitive Device (ESD) Terminating impedance (Tx Port): 50 Ω (Single-ended) Terminating impedance (Rx Port): 100/10nH Ω (Balanced) Terminating impedance (Ant Port): 50//2.4nH Ω (Single-ended) Tx to ANT Specification (ZRX:100ohm) Remark Minimum Typical Maximum 1.8 2.4 2510~2570MHz 2500~2570 MHz dB(*1) 2.4 3.0 2500~2570 MHz dB 1.2 2.2 1.7 2.1 2500~2570 MHz 1.8 2.3 Parameters Description Insertion Loss Ripple VSWR ANT Tx Unit Attenuation: 10~1565.42 MHz 1565.42~1605.886 MHz dB dB 30 35 38 38 - 1605.886~1680 MHz 1805~1880 MHz 1900~1920 MHz dB dB dB 25 30 30 37 35 35 - 2010~2025 MHz dB 30 34 - 2110~2170 MHz 2401~2473 MHz 2456 ~ 2478 MHz 2461 ~ 2483 MHz dB dB(*2) dB(*2) dB(*2) 30 35 30 23 34 47 47 44 - 2473 ~ 2495 MHz dB(*2) 4 10 - 2474 ~ 2500 MHz 2590~2620 MHz dB dB 1.0 1.5 2 5 - 2620~2690 MHz dB 45 50 - 5000 ~ 5140 MHz dB 35 50 - 5150 ~ 5850 MHz 7500 ~ 7710 MHz dB dB 35 30 50 45 - - (*1) Specification of insertion loss excludes loss that comes from the test board. (*2) Integrated attenuation over 22MHz BW. TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document 2 ANT to Rx Specification (ZRX:100ohm) Minimum Typical Maximum Insertion Loss 2620~2690 MHz dB(*1) 2.6 3.2 Ripple 2620~2690 MHz dB 0.6 1.5 Phase balance 2620~2690 MHz deg -19 -5/+6 +19 Amplitude balance 2620~2690 MHz dB -1.9 -0.5/+0.1 +1.9 ANT 1.8 2.2 2620~2690 MHz VSWR Tx 1.8 2.2 Parameters Description Unit Remark Attenuation: 1 ~ 2380 MHz 824~849 MHz dB dB 35 53 46 85 - 880~915 MHz 1710 ~ 1785 MHz 1850~1910 MHz dB dB dB 60 50 50 85 57 56 - 2380~2450 MHz dB 40 46 - 2450~2484 MHz 2500~2570 MHz 2570~2605 MHz 2775~8000 MHz dB dB dB dB 35 45 1.5 20 49 51 4 44 - (*1) Specification of insertion loss excludes loss that comes from the test board. Tx to Rx Parameters Description Isolation Unit Specification (ZRX:100ohm) Minimum Typical Maximum 52 55 - 2500 ~ 2570 MHz dB 2500 ~ 2570 MHz dB 38 42 - 2620~2690 MHz 1574~1577 MHz dB dB 50 30 56 64 - 5000~5140 MHz dB 30 50 - 7500~7710 MHz dB 25 47 - TAI-SAW TECHNOLOGY CO., LTD. Remark Differential Common mode Differential TST DCC Release document 3 C. FREQUENCY CHARACTERISTICS: These data exclude loss that comes from the test board. TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document 4 These data exclude loss that comes from the test board. TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document 5 TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document 6 TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document 7 TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document 8 TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document 9 TAI-SAW TECHNOLOGY CO., LTD.DCC TST 10 Release document TAI-SAW TECHNOLOGY CO., LTD.DCC TST 11 Release document TAI-SAW TECHNOLOGY CO., LTD.DCC TST 12 Release document D. MEASUREMENT CIRCUIT: E.OUTLINE DRAWIN: TAI-SAW TECHNOLOGY CO., LTD.DCC TST 13 Release document Top View (Sample Production): Top View (Mass Production): Product date Code (EIAJ) TAI-SAW TECHNOLOGY CO., LTD.DCC TST 14 Release document F. FOOTPRINT: TAI-SAW TECHNOLOGY CO., LTD.DCC TST 15 Release document G. PACKING: 1. REEL DIMENSION 2. TAPE DIMENSION TAI-SAW TECHNOLOGY CO., LTD.DCC TST 16 Release document G. RECOMMENDED TEMPERATURE PROFILE OF REFLOW SOLDERING: The figure below shows the recommended temperature profile for reflow soldering in the case of lead-free solder alloy Sn3.0Ag0.5Cu. Recommended number of reflow cycles is 5 maximum. Suitable condition for solder heating is different depending on composition and manufacturing method. Please contact the solder manufacturer for details. TAI-SAW TECHNOLOGY CO., LTD.DCC TST 17 Release document