130 03B WBR BR1 300 HighVoltageFast-SwitchingNPNPowerTransistor Features ■ Very High Switching Speed ■ High Voltage Capability ■ Wide Reverse Bias SOA General Description This Device is designed for high voltage, High speed switching characteristics required such as lighting system,switching mode power supply. Absolute Maximum Ratings Symbol Parameter Test Conditions Value Units VCES Collector -Emitter Voltage VBE=0 600 V VCEO Collector -Emitter voltage IB=0 400 V VEBO Emitter-Bade Voltage IC=0 9.0 V IC Collector Current 1.5 A ICP Collector pulse Current 3.0 A IB Base Current 0.75 A IBM Base Peak Current 1.5 A PC Total dissipation at Tc=25℃ 30 W TJ Operation Junction Temperature -40~150 ℃ TSTG Storage Temperature -40~150 ℃ tP=5ms Thermal Characteristics Symbol Parameter RӨJC Thermal Resistance Junction to Case RӨJA Thermal Resistance Junction to Ambient Rev.A Aug.2010 Copyright@Winsemi Microelectronics Co., Ltd., All right reserved. Value Units 4.16 ℃/W 89 ℃/W 130 03B WBR BR1 300 Electrical Characteristics(Tc=25℃ Symbol VCEO(sus) unless otherwise noted) Parameter Value Test Conditions Collector-Emitter Breakdown Voltage Ic=10mA,Ib=0 Typ Max 400 - - Ic=0.5A,Ib=0.1A VCE(sat) VBE(sat) ICBO hFE Collector -Emitter Saturation Voltage Base -Emitter Saturation Voltage Ic=1.0A,Ib=0.25A Ic=1.5A,Ib=0.5A Ic=0.5A,Ib=0.1A Vcb=700V (Vbe= -1.5v) Vcb=700V,Tc=100℃ DC Current Gain V 0.3 - - 0.5 V 1.0 - - Ic=1.0A,Ib=0.25A Collector -Base Cutoff Current Units Min 1.0 V 1.2 - - 1.0 mA 5.0 Vce=2V,Ic=0.5A 10 - 30 Vce=2V,Ic=1.0A 5 - 25 VCC=125V,Ic=1A IB1=0.2A,IB2= -0.5A TP=25µs 0.2 1.0 - 1.5 3.0 0.15 0.4 - 1.2 4.0 - 0.12 0.3 - 2.4 5.0 - 0.15 0.4 Resistive Load ton ts Turn -on Time Storage Time Fall Time tf Inductive Load ts tf VCC=15V,Ic=1A IB1=0.2A,IB2= -0.5A L=0.35mH,Vclamp= 300V Storage Time Fall Time Inductive Load VCC=15V,Ic=1A IB1=0.2A,IB2= -0.5A L=0.35mH,Vclamp= 300V Tc=100℃ Storage Time ts tf Fall Time µs µs µs Note : Pulse Test : Pulse width 300,Duty cycle 2% 2/5 Steady, keep you advance 130 03B WBR BR1 300 Fig.1 DC Current Gain Fig.2 Saturation Voltage Fig.3 Switching Time Fig.4 Safe Operation Area Fig.5 Power Perating 3/5 Steady, keep you advance 130 03B WBR BR1 300 Resistive Load Switching test Circuit Inductive Load Switching & RBSOA Test circuit 4/5 Steady, keep you advance 130 03B WBR BR1 300 26 Pack age Dim ension TO-1 -12 cka Dime Unit: 5/5 Steady, keep you advance