DEMKO CERTIFICATE
Certificate No.
Page
Date of Issue
D-03313-A3
1/3
2015-03-03
Certificate Holder
SL POWER ELECTRONICS CORP
BLDG A
6050 KING DR
VENTURA, CA 93003 USA
Manufacturer
SL POWER ELECTRONICS CORP
BLDG A
6050 KING DR
VENTURA, CA 93003 USA
Production site
INDUSTRIAS S L S A DE C V
CIRCUITO SIGLO XXI 2055
COL PARQUE INDUSTRIAL EX-XXI
MEXICALI, BC 21254 Mexico
See Page 2
Certified Product
Model
Switching Power Supply
MB65SXXWYY
See Page 2
Trademark
Rated Voltage / Frequency
Rated Current / Power
Insulation Class
Degree of protection (IP)
Tested acc. to
Test Report No.
Additional
Expire date
Certification Manager
Jan-Erik Storgaard
Certification Body
100-240V~, 50-60Hz
1.5A
MB65SXXKYY series (Class I type), and MB65SXXCYY series
(Class II type)
IPX0
EN 60601-1:2006/A11:2011, EN 60601-1:2006/A12:2014, EN
60601-1:2006
E116994-A104-CB-1 issued on 2015-03-03
For building-in
2018-12-24
This is to certify that representative sample(s) of the Product described herein ("Certified Product") have
been investigated and found in compliance with the Standard(s) indicated on this Certificate, in
accordance with the D Mark Requirements. The Designated Certificate holder is entitled to use the d or
for cables <DEMKO> for the Certified Product manufactured at the production site(s) identified above, in
accordance with the D Mark Service Agreement, including without limitation the D Mark Testing and
Certification Services Service Terms. Only those Products bearing the D Mark should be considered as
being covered by UL's D Mark Service. This Certificate shall remain valid through the expiration date,
unless terminated earlier in accordance with the Service Agreement including without limitation if the
Standard identified on this Certificate is amended or withdrawn prior the expiration date.
UL International Demko A/S, Borupvang 5A, DK-2750
Ballerup, Denmark, Tel. +45 44 85 65 65,
[email protected]
www.ul-europe.com
Appendix DEMKO CERTIFICATE
Certificate No.
Page
Date of Issue
D-03313-A3
2/3
2015-03-03
Model Details:
MB65SXXWYY Where XX represents output voltage which may be any number from 12 to 48, W can
be K for Class I construction and C for Class II construction or blank, YY may be any number from 00 to
99 or blank, designates additional configurations indicating non-safety related options.
Production Sites:
SL XIANGHE POWER ELECTRONICS CORP
No.B-02-03,North side of Landscape Ave, Qibu District,
Environmental Industrial Park
Xianghe, 065400 Hebei China
Additional Information:
This certificate replaces the certificate no. D-03313-A2 issued 2014-10-08 due to:
1. Delete factory located in Hebei China
2. Add EN 60601-1/A12:2014 to the evaluation.
Output rating @ ambient temperature condition: Tambient≤50 degree C
MB65S12K:12Vdc/5.4A
MB65S15K:15Vdc/4.33A
MB65S18K:18Vdc/3.6A
MB65S24K:24Vdc/2.7A
MB65S28K:28Vdc/2.32A
MB65S32K:32Vdc/2.03A
MB65S48K:48Vdc/1.35A
Output rating @ ambient temperature condition: Tambient<=70 degree C
MB65S12K:12Vdc/3.8A
MB65S15K:15Vdc/3.04A
MB65S18K:18Vdc/2.53A
MB65S24K:24Vdc/1.9A
MB65S28K:28Vdc/1.63A
MB65S32K:32Vdc/1.42A
MB65S48K:48Vdc/0.95A
Certification Body
UL International Demko A/S, Borupvang 5A, DK-2750
Ballerup, Denmark, Tel. +45 44 85 65 65, [email protected]
www.ul-europe.com
Appendix DEMKO CERTIFICATE
Certificate No.
Page
Date of Issue
Certification Body
D-03313-A3
3/3
2015-03-03
UL International Demko A/S, Borupvang 5A, DK-2750
Ballerup, Denmark, Tel. +45 44 85 65 65, [email protected]
www.ul-europe.com