DEMKO CERTIFICATE Certificate No. Page Date of Issue D-04416 1/3 2015-08-14 Certificate Holder SL POWER ELECTRONICS CORP BLDG A 6050 KING DR VENTURA, CA 93003 USA Manufacturer SL POWER ELECTRONICS CORP BLDG A 6050 KING DR VENTURA, CA 93003 USA Production site INDUSTRIAS S L S A DE C V CIRCUITO SIGLO XXI 2055 COL PARQUE INDUSTRIAL EX-XXI MEXICALI, BC 21254 Mexico See Page 2 Certified Product Model Trademark Rated Voltage / Frequency Rated Current / Power Insulation Class Degree of protection (IP) Tested acc. to Test Report No. Additional Expire date Certification Manager Jan-Erik Storgaard Certification Body Medical Switching Power Supply, AC-DC Power Supply MC425D2412EF, MU425S18EXX, TU425S18EXX See Page 2 See Page 2 See Page 2 I IP X0 EN 60601-1:2006/A11:2011, EN 60601-1:2006/A12:2014, EN 60601-1:2006 E116994-A103-CB-2 issued on 2015-08-13 2018-12-24 This is to certify that representative sample(s) of the Product described herein ("Certified Product") have been investigated and found in compliance with the Standard(s) indicated on this Certificate, in accordance with the D Mark Requirements. The Designated Certificate holder is entitled to use the d or for cables <DEMKO> for the Certified Product manufactured at the production site(s) identified above, in accordance with the D Mark Service Agreement, including without limitation the D Mark Testing and Certification Services Service Terms. Only those Products bearing the D Mark should be considered as being covered by UL's D Mark Service. This Certificate shall remain valid through the expiration date, unless terminated earlier in accordance with the Service Agreement including without limitation if the Standard identified on this Certificate is amended or withdrawn prior the expiration date. UL International Demko A/S, Borupvang 5A, DK-2750 Ballerup, Denmark, Tel. +45 44 85 65 65, [email protected] www.ul-europe.com Appendix DEMKO CERTIFICATE Certificate No. Page Date of Issue D-04416 2/3 2015-08-14 Model Details: MU425S18EXX,TU425S18EXX (XX=00-99, or blank) Production Sites: SL XIANGHE POWER ELECTRONICS CORP No.B-02-03,North side of Landscape Ave, Qibu District, Environmental Industrial Park Xianghe, 065400 Hebei China Ratings: Input: 100-240V~, 50-60Hz, 4.5A Output: For convection: Main output: 18Vdc/14.67A max Fan output: 12Vdc/0.5A max Standby output: 5Vdc/2.0A max For 200 LFM airflow: Main output: 18Vdc/21.45A max Fan output: 12Vdc/1.0A max Standby output: 5Vdc/2.0A max MC425D2412EF: 400 W max total power with 15 cfm integral fan Main output: 24Vdc/15.7A max Standby output: 5Vdc/2.0A max Main output 2: 12 Vdc/8.0A max Fan output: 12Vdc/1.0A max External Certification Information: Based on CB Test Certificate US-25795-UL dated 2015-08-14, issued by UL (US) Additional Information: The risk management requirements of the standard were not addressed. Certification Body UL International Demko A/S, Borupvang 5A, DK-2750 Ballerup, Denmark, Tel. +45 44 85 65 65, [email protected] www.ul-europe.com Appendix DEMKO CERTIFICATE Certificate No. Page Date of Issue Certification Body D-04416 3/3 2015-08-14 UL International Demko A/S, Borupvang 5A, DK-2750 Ballerup, Denmark, Tel. +45 44 85 65 65, [email protected] www.ul-europe.com