DEMKO CERTIFICATE
Certificate No.
Page
Date of Issue
D-03667-A1
1/4
2015-03-19
Certificate Holder
SL POWER ELECTRONICS CORP
BLDG A
6050 KING DR
VENTURA, CA 93003 USA
Manufacturer
SL POWER ELECTRONICS CORP
BLDG A
6050 KING DR
VENTURA, CA 93003 USA
Production site
INDUSTRIAS S L S A DE C V
CIRCUITO SIGLO XXI 2055
COL PARQUE INDUSTRIAL EX-XXI
MEXICALI, BC 21254 Mexico
See Page 2
Certified Product
Model
Component – Switching Power Supply
MINT1500BWW14XYZ, MINT1500C2414E02,
MINT1500WXX14YZZ
See Page 2
Trademark
Rated Voltage / Frequency
Rated Current / Power
Insulation Class
Degree of protection (IP)
Tested acc. to
Test Report No.
Additional
Expire date
Certification Manager
Jan-Erik Storgaard
Certification Body
100-240V~, 50-60Hz
6A
I
Ordinary
EN 60601-1:2006/A11:2011, EN 60601-1:2006/A12:2014, EN
60601-1:2006/A1:2013, EN 60601-1:2006
E116994-4786576041B Amendment 1 issued on 2015-03-04
For building-in
2024-10-02
This is to certify that representative sample(s) of the Product described herein ("Certified Product") have
been investigated and found in compliance with the Standard(s) indicated on this Certificate, in
accordance with the D Mark Requirements. The Designated Certificate holder is entitled to use the d or
for cables <DEMKO> for the Certified Product manufactured at the production site(s) identified above, in
accordance with the D Mark Service Agreement, including without limitation the D Mark Testing and
Certification Services Service Terms. Only those Products bearing the D Mark should be considered as
being covered by UL's D Mark Service. This Certificate shall remain valid through the expiration date,
unless terminated earlier in accordance with the Service Agreement including without limitation if the
Standard identified on this Certificate is amended or withdrawn prior the expiration date.
UL International Demko A/S, Borupvang 5A, DK-2750
Ballerup, Denmark, Tel. +45 44 85 65 65,
[email protected]
www.ul-europe.com
Appendix DEMKO CERTIFICATE
Certificate No.
Page
Date of Issue
D-03667-A1
2/4
2015-03-19
Model Details:
MINT1500BWW14XYZ MINT= Medical Internal New Technology
1 = 1 Output
500 = 500W max.
B = 1500 Vac Isolation (One MOPP) between Output to Ground for Type BF applications (Applies to all
outputs and signals)
WW = Output Voltage 24 to 56 Vdc
X = is Input Connector and can be E or L or other, where E is 3 Pin, L is Terminal Block and others are
available.
Y = 0, C, T or E where 0 is U-Channel, C is U-Channel with Cover, T is Top Fan/Cover, and E is End
Fan/Cover
14 = is Output Connector (Screw Type)
Z = 0 is standard; 2-9 are value added options not related to Safety.
MINT1500C2414E02,MINT1500WXX14YZZ MINT= Medical Internal New Technology
1 = 1 Output
500 = 500W max.
W = A, C, T or E where A is U-Channel, C is U-Channel with Cover, T is Top Fan/Cover, and E is End
Fan/Cover
XX = Output Voltage 12 to 56 Vdc
14 = is Output Connector (Screw Type)
Y = is Input Connector and can be E or L or other, where E is 3 Pin, L is Terminal Block and others are
available.
ZZ = 01 is standard; 2-99 are value added options not related to Safety.
Production Sites:
SL XIANGHE POWER ELECTRONICS CORP
No.B-02-03,North side of Landscape Ave, Qibu District,
Environmental Industrial Park
Xianghe, 065400 Hebei China
Additional Information:
This certificate replaces the certificate no. D-03667 issued 2014-10-03 due to:
1. Added Model MINT1500BWW14XYZ
2.Evaluation of Clearance distances from 3000m to 4000m
3.Updates to applicable clauses relevant to the new model being added
4.Updates to the Critical Components Table
5.Replacement of Enclosure 9 which added the Flyleads to Transformer (T201)
6.Update to Enclosures to add Model MINT1500B series
7.Addressed EN 60601-1:2006/A11:2011/A12:2014 in GPI
8.Delete factory and corrected factory name
MINT1500WXX14YZZ , MINT1500BWW14XYZ output:
With Max. 200 LFM (linear feet per minute) forced air flow or integral fan options:
Main Output: 12Vdc/40A to 56Vdc/8.9A, Maximum 500W,
Certification Body
UL International Demko A/S, Borupvang 5A, DK-2750
Ballerup, Denmark, Tel. +45 44 85 65 65, [email protected]
www.ul-europe.com
Appendix DEMKO CERTIFICATE
Certificate No.
Page
Date of Issue
D-03667-A1
3/4
2015-03-19
Fan Output: 12Vdc/1.0A
Signal: 5VSB/0.2A
Without forced air flow:
Main Output: 12Vdc/16.6A to 56Vdc/4.6A, Maximum 350W,
Fan Output: 12Vdc/1.0A
Signal: 5VSB/0.2A
MINT1500C2414E02 output:
With Max. 200 LFM (linear feet per minute) forced air flow:
Main Output: 24Vdc/20.8A, Maximum 500W
Testing done under the Supervised Manufacturer´s Testing (SMT) procedure
Certification Body
UL International Demko A/S, Borupvang 5A, DK-2750
Ballerup, Denmark, Tel. +45 44 85 65 65,
[email protected]
www.ul-europe.com
Appendix DEMKO CERTIFICATE
Certificate No.
Page
Date of Issue
Certification Body
D-03667-A1
4/4
2015-03-19
UL International Demko A/S, Borupvang 5A, DK-2750
Ballerup, Denmark, Tel. +45 44 85 65 65, [email protected]
www.ul-europe.com