INTERSIL HA2

HA-5127/883
®
Data Sheet
January 16, 2006
Ultra Low Noise, Precision Operational
Amplifier
The HA-5127/883 monolithic operational amplifier features
an excellent combination of precision DC and wideband high
speed characteristics. Utilizing the Intersil D.I. technology
and advanced processing techniques, this unique design
unites low noise precision instrumentation performance with
high speed, wideband capability.
FN3751.3
Features
• This Circuit is Processed in Accordance to MIL-STD-883
and is Fully Conformant Under the Provisions of
Paragraph 1.2.1.
• High Slew Rate . . . . . . . . . . . . . . . . . . . . . . . .7V/µs (Min)
• Unity Gain Bandwidth. . . . . . . . . . . . . . . . . . . .5MHz (Min)
• Low Noise Voltage (at 1kHz) . . . . . . . . . 4.5nV/√Hz (Max)
This amplifier’s impressive list of features include low VOS,
wide gain-bandwidth, high open loop gain, and high CMRR.
Additionally, this flexible device operates over a wide supply
range while consuming only 120mW of power.
• Low Offset Voltage . . . . . . . . . . . . . . . . . . . . .100µV (Max)
Using the HA-5127/883 allows designers to minimize errors
while maximizing speed and bandwidth.
• High Voltage Gain . . . . . . . . . . . . . . . . . . . 700kV/V (Min)
This device is ideally suited for low level transducer signal
amplifier circuits. Other applications which can utilize the
HA-5127/883’s qualities include instrumentation amplifiers,
pulse or RF amplifiers, audio preamplifiers, and signal
conditioning circuits.
Ordering Information
PART
NUMBER
HA2-5127/883
• High CMRR . . . . . . . . . . . . . . . . . . . . . . . . . . 100dB (Min)
Applications
• High Speed Signal Conditioners
• Wide Bandwidth Instrumentation Amplifiers
• Low Level Transducer Amplifiers
• Fast, Low Level Voltage Comparators
• Highest Quality Audio Preamplifiers
TEMP
RANGE
(°C)
PART
MARKING
• Low Offset Drift With Temperature . . . . . . 1.8µV/oC (Max)
PKG.
PACKAGE DWG. #
HA2-5127/883 -55 to +125 8 Pin Can
T8.C
• Pulse/RF Amplifiers
Pinout
HA-5127/883
(METAL CAN)
TOP VIEW
BAL
8
BAL
-IN
1
+
2
+IN
7
V+
6 OUT
5
3
NC
4
V-
1
CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures.
1-888-INTERSIL or 1-888-468-3774 | Intersil (and design) is a registered trademark of Intersil Americas Inc.
Copyright Intersil Americas Inc. 2001, 2004, 2005, 2006. All Rights Reserved
All other trademarks mentioned are the property of their respective owners.
HA-5127/883
Absolute Maximum Ratings
Thermal Information
Voltage Between V+ and V- Terminals . . . . . . . . . . . . . . . . . . . .44V
Differential Input Voltage (Note 2) . . . . . . . . . . . . . . . . . . . . . . . 0.7V
Voltage at Either Input Terminal . . . . . . . . . . . . . . . . . . . . . V+ to VInput Current . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25mA
Differential Output Current . . . . . . . . . . . Full Short Circuit Protection
Junction Temperature (TJ) . . . . . . . . . . . . . . . . . . . . . . . . . . .+175oC
Storage Temperature Range . . . . . . . . . . . . . . . . . -65oC to +150oC
ESD Rating . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .<2000V
Lead Temperature (Soldering 10s) . . . . . . . . . . . . . . . . . . . .+300oC
Thermal Resistance
θJA
θJC
Metal Can Package . . . . . . . . . . . . . . . . . 155oC/W 67oC/W
Package Power Dissipation Limit at +75oC for TJ ≤ +175oC
Metal Can Package . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .645mW
Package Power Dissipation Derating Factor Above +75oC
Metal Can Package . . . . . . . . . . . . . . . . . . . . . . . . . . . .6.5mW/oC
CAUTION: Stresses above those listed in “Absolute Maximum Ratings” may cause permanent damage to the device. This is a stress only rating and operation of the
device at these or any other conditions above those indicated in the operational sections of this specification is not implied.
Recommended Operating Conditions
VINCM ≤ 1/2 (V+ - V-)
RL ≥ 600Ω
Operating Temperature Range . . . . . . . . . . . . . . . -55oC to +125oC
Operating Supply Voltage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ±15V
TABLE 1. DC ELECTRICAL PERFORMANCE CHARACTERISTICS
Device Tested at: VSUPPLY = ±15V, RSOURCE = 50Ω, RLOAD = 100kΩ, VOUT = 0V, Unless Otherwise Specified.
PARAMETERS
Input Offset Voltage
SYMBOL
VIO
CONDITIONS
VCM = 0V
GROUP A
SUBGROUPS
1
2, 3
Input Bias Current
IB
VCM = 0V,
RS = 10kΩ, 50Ω
1
2, 3
LIMITS
TEMPERATURE
o
+25 C
o
o
+125 C, -55 C
+25
oC
+125oC,
-55oC
MIN
MAX
UNITS
-100
100
µV
-300
300
µV
-
80
nA
-
150
nA
-75
75
nA
-135
135
nA
10.3
-
V
10.3
-
V
-
-10.3
V
-
-10.3
V
700
-
kV/V
300
-
kV/V
700
-
kV/V
300
-
kV/V
100
-
dB
100
-
dB
100
-
dB
+I B + -I B
 --------------------------


2
Input Offset Current
Common Mode Range
IIO
VCM = 0V,
+RS = 10kΩ,
-RS = 10kΩ
+CMR
-CMR
Large Signal Voltage
Gain
+AVOL
-AVOL
Common Mode
Rejection Ratio
+CMRR
V+ = +4.7V,
V- = -25.3V
V+ = +25.3V,
V- = -4.7V
VOUT = 0V and +10V,
RL = 2kΩ
VOUT = 0V and -10V,
RL = 2kΩ
∆VCM = +11V
∆VCM = +10V
-CMRR
∆VCM = -11V
∆VCM = -10V
Output Voltage Swing
+VOUT1
RL = 2kΩ
1
2, 3
1
2, 3
1
2, 3
RL = 2kΩ
-VOUT2
2
RL = 600Ω
RL = 600Ω
+125oC,
+25 C
+125oC,
5, 6
5, 6
1
2, 3
1
-55oC
o
o
4
-55oC
+25oC
+25
-55oC
oC
o
+125 C, -55 C
+25
+125o
oC
o
C, -55 C
o
+25 C
+125oC,
-55oC
o
+25 C
o
o
2, 3
+125 C, -55 C
100
-
dB
4
+25oC
11.5
-
V
11.5
-
V
-
-11.5
V
4
5, 6
+VOUT2
+125oC,
4
5, 6
-VOUT1
+25oC
4
4
+125o
o
C, -55 C
o
+25 C
+125oC,
-55oC
-
-11.5
V
o
10
-
V
o
-
-10
V
+25 C
+25 C
FN3751.3
January 16, 2006
HA-5127/883
TABLE 1. DC ELECTRICAL PERFORMANCE CHARACTERISTICS (Continued)
Device Tested at: VSUPPLY = ±15V, RSOURCE = 50Ω, RLOAD = 100kΩ, VOUT = 0V, Unless Otherwise Specified.
PARAMETERS
Output Current
SYMBOL
TEMPERATURE
MIN
MAX
UNITS
+IOUT
VOUT = -10V
4
+25oC
16.5
-
mA
-IOUT
VOUT = +10V
4
+25oC
-
-16.5
mA
+ICC
VOUT = 0V, IOUT = 0mA
1
+25oC
-
4
mA
2, 3
+125oC, -55oC
-
4
mA
1
+25oC
-4
-
mA
2, 3
+125oC, -55oC
-4
-
mA
1
+25oC
86
-
dB
2, 3
+125oC, -55oC
86
-
dB
1
+25oC
86
-
dB
2, 3
+125oC, -55oC
86
-
dB
1
+25oC
VIO-1
-
mV
2, 3
+125oC, -55oC
VIO-1
-
mV
1
+25oC
VIO+1
-
mV
2, 3
+125oC, -55oC
VIO+1
-
mV
Quiescent Power
Supply Current
VOUT = 0V, IOUT = 0mA
-ICC
Power Supply
Rejection Ratio
CONDITIONS
∆VSUP = 14V
+PSRR
∆VSUP = 13.5V
∆VSUP = 14V
-PSRR
∆VSUP = 13.5V
Offset Voltage
Adjustment
LIMITS
GROUP A
SUBGROUPS
+VIOAdj
Note 1
-VIOAdj
Note 1
NOTE:
1. Offset adjustment range is [VIO (Measured) ±1mV] minimum referred to output. This test is for functionality only to assure adjustment through 0V.
2. For differential input voltages greater than 0.7V, the input current must be limited to 25mA to protect the back-to-back input diodes.
TABLE 2. AC ELECTRICAL PERFORMANCE CHARACTERISTICS
Device Tested at: VSUPPLY = ±15V, RSOURCE = 50Ω, RLOAD = 2kΩ, CLOAD = 50pF, AVCL = +1V/V, Unless Otherwise Specified.
PARAMETERS
SYMBOL
Slew Rate
+SR
-SR
Rise and Fall Time
Overshoot
CONDITIONS
VOUT = -3V to +3V
LIMITS
GROUP A
SUBGROUP
TEMPERATURE
MIN
MAX
UNITS
7
+25oC
7
-
V/µs
o
VOUT = +3V to -3V
7
+25 C
7
-
V/µs
tR
VOUT = 0 to +200mV
10% ≤ TR ≤ 90%
7
+25oC
-
150
ns
tF
VOUT = 0 to -200mV
10% ≤ TF ≤ 90%
7
+25oC
-
150
ns
+OS
VOUT = 0 to +200mV
7
+25oC
-
40
%
7
+25oC
-
40
%
-OS
VOUT = 0 to -200mV
TABLE 3. ELECTRICAL PERFORMANCE CHARACTERISTICS
Device Characterized at: VSUPPLY = ±15V, RLOAD = 2kΩ, CLOAD = 50pF, AV = +1V/V, Unless Otherwise Specified.
LIMITS
PARAMETERS
SYMBOL
CONDITIONS
NOTES
TEMPERATURE
o
MIN
MAX
UNITS
Average Offset Voltage Drift
VIOTC
VCM = 0V
1
-55 C to +125 C
-
1.8
µV/oC
Differential Input Resistance
RIN
VCM = 0V
1
+25oC
0.8
-
MΩ
3
o
FN3751.3
January 16, 2006
HA-5127/883
TABLE 3. ELECTRICAL PERFORMANCE CHARACTERISTICS
Device Characterized at: VSUPPLY = ±15V, RLOAD = 2kΩ, CLOAD = 50pF, AV = +1V/V, Unless Otherwise Specified.
LIMITS
PARAMETERS
SYMBOL
Low Frequency Peak-to-Peak
Noise
ENP-P
Input Noise Voltage Density
EN
Input Noise Current Density
IN
Unity Gain Bandwidth
UGBW
CONDITIONS
NOTES
TEMPERATURE
MIN
MAX
UNITS
0.1Hz to 10Hz
1
+25oC
-
0.25
µVP-P
RS = 20Ω, fO = 10Hz
1
+25oC
-
10.0
nV/√Hz
RS = 20Ω, fO = 100Hz
1
+25 C
-
5.6
nV/√Hz
RS = 20Ω, fO = 1kHz
1
+25oC
-
4.5
nV/√Hz
1
+25 C
-
4.0
pA/√Hz
RS = 2MΩ, fO = 100Hz
1
+25oC
-
2.3
pA/√Hz
1
+25 C
-
0.6
pA/√Hz
VO = 100mV
1
+25oC
5
-
MHz
VPEAK = 10V
Minimum Closed Loop Stable
Gain
CLSG
Output Resistance
ROUT
Quiescent Power Consumption
PC
o
RS = 2MΩ, fO = 1kHz
FPBW
tS
o
RS = 2MΩ, fO = 10Hz
Full Power Bandwidth
Settling Time
o
o
1, 2
+25 C
111
-
kHz
RL = 2kΩ, CL = 50pF
1
-55oC to +125oC
±1
-
V/V
To 0.1% for a 10V Step
1
+25oC
-
2
µs
Open Loop
VOUT = 0V, IOUT = 0mA
o
1
+25 C
-
100
Ω
1, 3
-55oC to +125oC
-
120
mW
NOTES:
1. Parameters listed in Table 3 are controlled via design or process parameters and are not directly tested at final production. These parameters
are lab characterized upon initial design release, or upon design changes. These parameters are guaranteed by characterization based upon
data from multiple production runs which reflect lot to lot and within lot variation.
2. Full Power Bandwidth guarantee based on Slew Rate measurement using FPBW = Slew Rate/(2πVPEAK).
3. Quiescent Power Consumption based upon Quiescent Supply Current test maximum. (No load on output.)
TABLE 4. ELECTRICAL TEST REQUIREMENTS
MIL-STD-883 TEST REQUIREMENTS
Interim Electrical Parameters (Pre Burn-In)
Final Electrical Test Parameters
SUBGROUPS (SEE TABLES 1 AND 2) (NOTE 2)
1
1 (Note 1), 2, 3, 4, 5, 6, 7
Group A Test Requirements
1, 2, 3, 4, 5, 6, 7
Groups C and D Endpoints
1
NOTES:
1. PDA applies to Subgroup 1 only.
2. The Subgroup assignments of the parameters in these tables were patterned after Mil-M-38510/135, with the exception of VIO, which
is Subgroups 1, 2, 3.
4
FN3751.3
January 16, 2006
HA-5127/883
Die Characteristics
SUBSTRATE POTENTIAL (Powered Up): VTRANSISTOR COUNT: 63
PROCESS: Bipolar Dielectric Isolation
Metallization Mask Layout
HA-5127/883
BAL
BAL
-IN
V+
+IN
OUT
V-
5
NC
FN3751.3
January 16, 2006
HA-5127/883
Metal Can Packages (Can)
T8.C MIL-STD-1835 MACY1-X8 (A1)
REFERENCE PLANE
A
8 LEAD METAL CAN PACKAGE
e1
L
L2
L1
INCHES
ØD2
A
A
k1
Øe
ØD ØD1
2
N
1
β
Øb1
Øb
F
α
k
C
L
BASE AND
SEATING PLANE
Q
BASE METAL
Øb1
LEAD FINISH
Øb2
SECTION A-A
NOTES:
1. (All leads) Øb applies between L1 and L2. Øb1 applies between
L2 and 0.500 from the reference plane. Diameter is uncontrolled
in L1 and beyond 0.500 from the reference plane.
2. Measured from maximum diameter of the product.
MILLIMETERS
SYMBOL
MIN
MAX
MIN
MAX
NOTES
A
0.165
0.185
4.19
4.70
-
Øb
0.016
0.019
0.41
0.48
1
Øb1
0.016
0.021
0.41
0.53
1
Øb2
0.016
0.024
0.41
0.61
-
ØD
0.335
0.375
8.51
9.40
-
ØD1
0.305
0.335
7.75
8.51
-
ØD2
0.110
0.160
2.79
4.06
-
e
e1
0.200 BSC
5.08 BSC
0.100 BSC
-
2.54 BSC
-
F
-
0.040
-
1.02
-
k
0.027
0.034
0.69
0.86
-
k1
0.027
0.045
0.69
1.14
2
12.70
19.05
1
1.27
1
L
0.500
0.750
L1
-
0.050
L2
0.250
-
6.35
-
1
Q
0.010
0.045
0.25
1.14
-
-
α
45o
BSC
3
β
45o BSC
45o BSC
3
N
8
8
BSC
45o
3. α is the basic spacing from the centerline of the tab to terminal 1
and β is the basic spacing of each lead or lead position (N -1
places) from α, looking at the bottom of the package.
4
Rev. 0 5/18/94
4. N is the maximum number of terminal positions.
5. Dimensioning and tolerancing per ANSI Y14.5M - 1982.
6. Controlling dimension: INCH.
All Intersil U.S. products are manufactured, assembled and tested utilizing ISO9000 quality systems.
Intersil Corporation’s quality certifications can be viewed at www.intersil.com/design/quality
Intersil products are sold by description only. Intersil Corporation reserves the right to make changes in circuit design, software and/or specifications at any time without
notice. Accordingly, the reader is cautioned to verify that data sheets are current before placing orders. Information furnished by Intersil is believed to be accurate and
reliable. However, no responsibility is assumed by Intersil or its subsidiaries for its use; nor for any infringements of patents or other rights of third parties which may result
from its use. No license is granted by implication or otherwise under any patent or patent rights of Intersil or its subsidiaries.
For information regarding Intersil Corporation and its products, see www.intersil.com
6
FN3751.3
January 16, 2006