BobTail ® The Next Generation Small Diameter HuckBolt® No Pintail Fast Installation Vibration Resistant 1/4"-3/8" 1 The Huck BobTail System ® ® Engineered for the highest level of performance and reliability. The Huck BobTail system was developed to meet the unique challenges ® ® of a wide range of assembly applications, offering safe, quiet, swaged-on installation technology in an advanced HuckBolt design. ® Offering up to 10 times the fatigue strength of conventional nuts and bolts, BobTail delivers ultimate strength, installation speed, and vibration resistance. It has been designed to provide superior joining strength in even the most extreme environments. Available in a wide range of sizes, grades, and materials, BobTail often provides an overall lower installed cost when you factor in the cost of the fasteners with installation speeds and inspection labor. Unlike conventional nuts and bolts, which have gaps on the thread flanks even when tightened, the BobTail system is designed for full metal-tometal contact around the bolt thread by the collar. An installed BobTail has no gaps and delivers a more secure connection, providing reliability even in the most severe environments. Installed Gap Comparison GAP COMPARISON HHuckBolt UCKBOLT COLLAR ® NO GAP The swaged collar The swaged collar forms forms over the lock thread, and eliminates gap. over the lockthe thread, and eliminates the gap. 2 Standard STANDARD NUT Bolt & BOLT GAP NUT Regular nuts and bolts Regular nutsallows and bolts have gap, which for loosening vibration. have gap,bywhich allows for loosening by vibration. Unmatched Speed of Installation The BobTail System delivers a lightning-quick installation cycle time for greater productivity. This quick cycle is due, in part, to the short time required to apply the tool to the pin and complete the installation cycle. Once the operator engages the trigger, the swage sequence begins. Releasing the trigger ejects the fastener. ® 1 The pin is inserted into the prepared hole, and the collar is placed onto the pin. 2 The installation tool is applied to annular pull grooves. When the tool is activated, a puller in the nose assembly draws the pin into the tool, tension loading the joint and drawing up any sheet gap. 3 4 At a predetermined force, the anvil begins to swage the collar into the pin’s lockgrooves. Continued swaging elongates the collar and pin, developing precise clamp. When swaging of the collar into the pin lockgrooves is complete, the tool ejects the fastener and releases the puller to complete the sequence. Secure, Fast Installation Visual Inspection Combining an advanced fastener design with the latest in easy-to-use, ergonomic installation tooling, the BobTail system delivers a strong connection and sets a new standard for ease of installation. Pintail-less design means reduced noise, no waste, and improved corrosion resistance. ■ Collar material swaged into the lockgrooves forms a permanent, vibration-resistant connection. ■ Before Swaging Low-swage technology means faster, lighter-weight tooling that costs less. ■ BobTail® Benefits ■ No pintail ■ Silent installation ■ Unmatched installation speed ■ No repetitive stress injuries ■ Low overall installed cost ■ ■ Superior fatigue strength ■ ■ Vibration resistant Ergonomically designed installation tooling ■ ■ Eliminates need for secondary operations No special training or skills required for operators Quick visual inspection is all that's needed for a quality-assured joint After Swaging The swaging process deforms and changes the color of the collar. 3 Data and dimensions Head Style Options C E D Trazier 90° 98T A B Fastener Dimensions Trazier 98T 90° Diameter A B C B C B C 1/4" .249 max .537 — .507 .140 — .120 — — .473 — .437 .113 — .104 5/16" .313 max .680 — .640 .175 — .150 — — .589 — .547 .141 — .127 3/8" .374 max .820 — .780 .210 — .190 — — .709 — .656 .168 — .152 Grip Tables Grip 4 Grip Range 1/4" (8) 5/16" (10) D E 3/8" (12) D E D E 4 .125 — .375 0.187 1.000 0.187 1.156 0.187 1.310 6 .250 — .500 0.312 1.125 0.312 1.281 0.312 1.435 8 .375 — .625 0.437 1.250 0.437 1.406 0.437 1.560 10 .500 — .750 0.562 1.375 0.562 1.531 0.562 1.685 12 .625 — .875 0.687 1.500 0.687 1.656 0.687 1.810 14 .750 — 1.000 0.812 1.625 0.812 1.781 0.812 1.935 16 .875 — 1.125 0.937 1.750 0.937 1.906 0.937 2.060 18 1.000 — 1.250 1.062 1.875 1.062 2.031 1.062 2.185 20 1.125 — 1.375 1.187 2.000 1.187 2.156 1.187 2.310 Collar Dimensions Diameter F G H J 1/4" 0.485 — 0.515 0.360 — 0.380 0.396 MAX 0.250 — 0.255 5/16" 0.610 — 0.640 0.458 — 0.478 0.500 MAX 0.316 — 0.322 3/8" 0.730 — 0.770 0.545 — 0.565 0.600 MAX 0.376 — 0.384 G J F H Installed Fastener Values - lbf (KN) Carbon Steel Aluminum Grade 2 R Grade 5 BR Stainless Steel 2024 C 305 U Diameter Clamp Tensile Shear Clamp Tensile Shear Clamp Tensile Shear Clamp Tensile Shear 1/4" 1,805 (8.0) 3,000 (13.3) 3,050 (13.6) 2,300 (10.2) 3,700 (16.4) 4,300 (19.1) 950 (4.2) 1,800 (8.0) 1,875 (8.3) 1,805 (8.0) 2,750 (12.2) 3,550 (15.8) 5/16" 2,810 (12.5) 4,600 (20.5) 4,725 (21.0) 4,200 (18.7) 6,000 (26.7) 6,700 (29.8) 1,500 (6.7) 2,850 (12.7) 2,925 (13.0) 2,810 (12.5) 4,250 (18.9) 5,525 (24.6) 3/8" 4020 (17.9) 6,500 (28.9) 6,825 (30.3) 5,980 (26.6) 9,300 (41.4) 9,600 (42.7) 2,200 (9.8) 4,200 (18.7) 4,200 (18.7) 4,020 (17.9) 6,100 (27.1) 7,950 (35.4) Inspection Data Diameter A min Hole Data B max C min D max Diameter Max Hole 1/4" 0.281 1/4" 0.225 0.535 0.260 0.361 5/16" 0.280 0.600 0.325 0.457 3/8” 0.345 0.665 0.390 0.542 Should “A” or “B” dimensions exceed the given values, the fastener is out-of-grip. A “C” dimension less than the given values indicates an incomplete swage. A “D” dimension greater than the given values indicates an incorrect or worn anvil on the installation tool. 5/16" 0.359 3/8" 0.422 D MAX. A MIN. C MIN. B MAX. 5 BobTail Installation Tooling ® Our unique design means easier, quicker installation. Lightweight, Technologically Advanced Tooling Newly designed BobTail tooling makes the installation process quicker and easier by reducing the force required to install each fastener. More compact and lighter weight than previous Huck® lockbolt production tooling, BobTail installation tools also offer greater operator flexibility as well as extended reach into difficult areas. ® For tight, space-constrained applications, BobTail tools allow the operator to position his or her hand at a safe distance from the working structure during installation. Tooling Selection Tooling Weight and Dimensions Diameter Tool Installation Nose 244BT 2480 SFBTT8 99-7932 99-7932 99-7930 99-7932CC 99-7932CC 99-7930CC 244BT Pneudraulic 6.3 lbs 5.99" 12.79" 1.44" 1/4" 256BT Pneudraulic 11 lbs 6.99" 14.85" 1.50" 256BT SFBTT8 99-7923 99-7929 99-7923CC 99-7929CC 2480 Hydraulic 2.2 lbs 8.21” 6.55” 1.82” SFBTT8 Hydraulic 4.0 lbs 3.69" 2.29" 1.70" 254BT 256BT SFBTT8 99-7924 99-7924 99-7928 99-7924CC 99-7924CC 99-7928CC 5/16” 3/8" Cutter Nose Model Type Weight Length Height Width Safe and Silent Performance The BobTail fastener is installed without a pin break, contributing to a dramatic reduction of noise on the shop floor, and subsequently, improved worker hearing safety. Instances of foreign object damage (FOD) and loose pintail injuries are eliminated. Because BobTail tooling features a smooth, shock-free installation sequence, repetitive stress injuries are eliminated, and overall safety is increased. Model 256BT Model This BobTail installation tool was specifically designed to perform in tight spaces with less than 5-1/2" of clearance. 244BT Cost-Efficient Operation The BobTail System’s low swage technology directly contributes to longer tool and component life, while allowing extended tool maintenance cycles. As a result, costs for parts and overall support are reduced, while system uptime is increased. 6 Model SFBTT8 Ordering Information Follow the form below to construct a part number for ordering BobTail pins and their respective collars. Refer to the Grip Tables (page 4) for grip numbers. ® Pins BT (HEAD STYLE) - (MATERIAL) (DIAMETER) - (GRIP NUMBER) (FINISH) Example: BT-BR8-8GA is a BobTail Pin, Grade 5 Carbon Steel, 1/4" Diameter, Grip 8, Zinc Plated Head Style Prefix Material Code Trazier BT Grade 2 Carbon Steel R 98T BT98T Grade 5 Carbon Steel BR 90° BT90 3/8" 12 2024 Aluminum C 305 Stainless Steel U 430 Stainless Steel 4U Diameter Code Grip Finish Suffix 1/4" 8 GA 10 Refer to Grip Table on page 4 Zinc, clear chromate 5/16" Collars BTC (GRADE) - (MATERIAL) (DIAMETER) (FINISH) Example: BTC5-R8UA is a BobTail Collar, Grade 5 Carbon Steel, 1/4" Diameter, Zinc Plated Grade Prefix Material Code Diameter Code Finish Suffix Grade 2 BTC Low Carbon Steel R Grade 5 BTC5 Aluminum 2B 1/4" 8 Zinc Plate (Gr 2) GAH 5/16" 10 Zinc Plate (Gr 5) Grade 8 BTC8 305 Stainless Steel U 3/8" UA 12 Zinc Plate (Gr 8) 430 Stainless Steel 4U BL 7 Alcoa Fastening Systems For more than 120 years, the name Alcoa has been recognized worldwide as a strong leader in product quality and customer support. These strengths are found in every product manufactured for Alcoa Fastening Systems, offering the greatest breadth and depth of fastening system solutions in the industry. Alcoa Fastening Systems (AFS) maintains company offices in the United States and in many other countries. AFS fastener distributors are also located in many of the world’s industrial centers, where they provide a ready source of AFS fasteners, installation tools, tool parts, and application assistance. Americas Industrial Fastener Division 8001 Imperial Drive Waco, TX 76712, USA P.O. Box 8117 Waco, TX 76714-8117, USA Tel: 800 388 4825 Fax: 800 798 4825 Installation Tool Division 1 Corporate Drive Kingston, NY 12401, USA Tel: 800 278 4825 Fax: 845 334 7333 AFS Industrial Distribution Group Headquarters 1925 North MacArthur Drive Tracy, CA 95376, USA Tel: 800 826 2884 Fax: 209 839 3022 International Locations AFS Industrial Distribution 14300 Clay Terrace Blvd. Suite 250 Carmel, IN 46032, USA Tel: 800 826 2884 Fax: 800 573 2645 Latin America Sales Avenida Parque Lira 79-402 Tacubaya Mexico C P 11850 Tel: +52 55 5515 1776 Fax: +52 55 5277 7564 Brazil Sales Av. Nações Unidas, 12.901 Torre Oeste, 3º andar São Paulo – SP – Brasil 04578-000 Tel: 0800 015 9888 Fax: +55 11 5509 0200 India Operations Unit no. 28, Chowringhee Court 55/1, Chowringhee Road Kolkata – 700071 India Tel: +91 33 4069 9170/80 Fax: +91 33 4069 9184 Japan/Korea Sales Alcoa Japan Ltd. #1013 NBF Hibiya Bldg. Uchisaiwai-cho, Chiyoda-ku Tokyo 100-1011 Japan Tel: +81 3 3539 6577 Fax: +81 3 3539 6585 Melbourne Operations 1508 Centre Road Clayton, Victoria, 3168 Australia Tel: +61 3 8545 3333 Fax: +61 3 8545 3390 Suzhou Sales 58 Yinsheng Road, Shengpu Suzhou Industrial Park Suzhou Jiangsu 215126 China Tel: 0512 62823800-8888 Fax: 0512 62863810 AFSHuck.net YouTube.com/AFSIndustrial The information contained in this publication is only for general guidance, and is not intended to create any warranty, express, implied, or statutory; all warranties are contained only in AFS’s written quotations, acknowledgments, and/or purchase orders. It is recommended that the user secure specific, up-to-date data and information regarding each application and/or use of such products. © 2014 Alcoa Fastening Systems. All rights reserved. AFS5507 0714 500 Telford Operations Unit C, Stafford Park 7 Telford, Shropshire TF3, 3BQ United Kingdom Tel: +44 1952 2900 11 Fax: +44 1952 2904 59 Alcoa Fastening Systems St Cosme Operations 9 rue de Cressonnieres 72110 Saint Cosme en Varais France Tel: +33 0 2.43.31.41.00 Fax: +33 0 2.43.31.41.41 Alcoa Fastening Systems Kelkheim Operations Industriestr. 6 65779 Kelkheim Germany Tel: +49 [0] 6195 8050 Fax: +49 [0] 6195 2001