Document 406-1 USB 3.0 Common Mode Choke 0603 • Designed for high-speed USB 3.0, HDMI, SATA, IEEE1394 and LVDS applications; data rates up to 4.8 Gbit/s. • Miniature EIA 0603 footprint; only 1.07 mm tall • Most values provide >15 dB common mode attenuation and >100 ohms impedance. Designer’s Kit C384 contains 10 of each value and all values of our 1206USB and 0805USB Core material Ferrite Environmental RoHS compliant, halogen free Terminations Gold over nickel over silver-palladium-glass frit Ambient temperature –40°C to +85°C with Irms current, +85°C to +105°C with derated current Storage temperature Component: –40°C to +105°C. Tape and reel packaging: –40°C to +80°C Resistance to soldering heat Max three 40 second reflows at +260°C, parts cooled to room temperature between cycles Moisture Sensitivity Level (MSL) 1 (unlimited floor life at <30°C / 85% relative humidity) Failures in Time (FIT) / Mean Time Between Failures (MTBF) 38 per billion hours / 26,315,789 hours, calculated per Telcordia SR-332 PCB washing Tested with pure water or alcohol only. For other solvents, see Doc787_PCB_Washing.pdf Common mode Common mode impedance typ (Ohms)attenuation typ (dB) Part number1 100 MHz 500 MHz 1 GHz 100 MHz 500 MHz 1 GHz 0603USB-251ML_ 25 44 0603USB-601ML_ 60 99 0603USB-951ML_ 95 156 0603USB-142ML_ 145 242 0603USB-222ML_ 225 384 64 142 234 353 592 Inductance2 DCR min (nH) 1.31 3.16 8.45 18 3.00 6.8813.27 37 4.62 9.7516.06 63 6.8512.8018.16 98 9.1416.5320.29 150 1. When ordering, please specify packaging code: 0603USB-222MLC Packaging:C =7″ machine-ready reel. EIA-481 embossed plastic tape (2000 parts per full reel). B=Less than full reel. In tape, but not machine ready. To have a leader and trailer added ($25 charge), use code letter C instead. D =13″ machine-ready reel. EIA-481 embossed plastic tape (7500 parts per full reel). 2. Inductance measured at 100 MHz using an Agilent/HP 4286A impedance analyzer and a Coilcraft SMD-A fixture. 3. DCR is specified per winding. 4. Current per winding that causes a 20°C rise from 25°C ambient. 5. Electrical specifications at 25°C. Refer to Doc 362 “Soldering Surface Mount Components” before soldering. max3 Isolation Irms4 (Ohms) (Vrms) (mA) 0.077 0.109 0.142 0.174 0.209 0.060 ±0.003 1,52 ±0,076 250500 250 500 250 500 250 500 250 500 1 2 4 3 0.042 ±0.004 1,07 ±0,10 0.004 0,10 0.023 0,58 0.013 0.034 0,33 0,86 1 2 4 3 0.030 0,73 2 1 3 4 0.010 0,25 0.030 ±0.003 0,76 ±0,076 0.010 0,25 Dimensions are in Recommended Land Pattern 0.012 0,30 inches mm Weight 4.9 – 5.2 mg Packaging 2000 per 7″reel; 7500 per 13″ reel; Plastic tape: 8 mm wide, 0.23 mm thick, 4 mm pocket spacing, 1.14 mm pocket depth US +1-847-639-6400 [email protected] UK +44-1236-730595 [email protected] Taiwan +886-2-2264 3646 [email protected] China +86-21-6218 8074 [email protected] Singapore + 65-6484 8412 [email protected] Document 406-1 Revised 07/20/10 © Coilcraft Inc. 2014 This product may not be used in medical or high risk applications without prior Coilcraft approval. Specification subject to change without notice. Please check web site for latest information. Document 406-2 USB 3.0 Common Mode Choke — 0603 Typical differential mode attenuation (Ref: 50 Ohms) 0 Attenuation (dB) 1 2 3 -251 -601 -951 -142 -222 4 5 6 1 10 100 1000 10000 Frequency (MHz) Typical common mode attenuation (Ref: 50 Ohms) 0 Attenuation (dB) 5 10 -251 -601 -951 -142 -222 15 20 25 30 1 10 100 1000 10000 Frequency (MHz) Typical impedance vs frequency 1000 -222 -142 -951 -601 Impedance (Ohms) 100 -251 10 1 0.1 1 10 100 1000 10000 Frequency (MHz) US +1-847-639-6400 [email protected] UK +44-1236-730595 [email protected] Taiwan +886-2-2264 3646 [email protected] China +86-21-6218 8074 [email protected] Singapore + 65-6484 8412 [email protected] Document 406-2 Revised 07/20/10 © Coilcraft Inc. 2014 This product may not be used in medical or high risk applications without prior Coilcraft approval. Specification subject to change without notice. Please check web site for latest information.