Document 386-1 USB 2.0 Common Mode Choke 1206 Eliminates virtually all common mode noise in high-speed, differential mode signal transmission applications such as USB 2.0, IEEE1394, HDMI and LVDS. Most provide >30 dB common mode attenuation and >100 ohms impedance. Designer’s Kit C384 contains 10 each of all 0603USB, 0805USB and 1206USB parts Core material Ferrite Environmental RoHS compliant, halogen free Terminations Gold over nickel over silver-palladium-glass frit. Ambient temperature –40°C to +85°C with Irms current Storage temperature Component: –40°C to +85°C. Tape and reel packaging: –40°C to +80°C Resistance to soldering heat Max three 40 second reflows at +260°C, parts cooled to room temperature between cycles Moisture Sensitivity Level (MSL) 1 (unlimited floor life at <30°C / 85% relative humidity) Failures in Time (FIT) / Mean Time Between Failures (MTBF) 38 per billion hours / 26,315,789 hours, calculated per Telcordia SR-332 PCB washing Tested with pure water or alcohol only. For other solvents, see Doc787_PCB_Washing.pdf Part number1 Common mode impedance typ (Ohms) 10 MHz 100 MHz 500 MHz 1206USB-371ML_ 1206USB-102ML_ 1206USB-172ML_ 1206USB-262ML_ 1206USB-372ML_ 1206USB-532ML_ 1206USB-672ML_ 1206USB-872ML_ 1206USB-113ML_ 15 37 95 30 100 200 55 170 345 85 265 545 125 370 775 170 530 1190 200 670 1500 265 870 2010 3301100 2425 Common mode attenuation typ (dB) Inductance2 DCR max3Isolation Irms4 10 MHz 100 MHz 500 MHz min (nH) (Ohms) (Vrms) (mA) 1.0 2.1 12.0 1.5 4.2 19.0 2.3 6.8 26.0 3.0 9.7 31.0 4.712.0 33.0 5.515.0 35.0 7.316.5 33.0 9.118.0 32.0 10.221.0 31.0 1.When ordering, please specify packaging code: 1206USB-113MLC Packaging:C =7″ machine-ready reel. EIA-481 embossed plastic tape (2000 parts per full reel). B=Less than full reel. In tape, but not machine ready. To have a leader and trailer added ($25 charge), use code letter C instead. D =13″ machine-ready reel. EIA-481 embossed plastic tape (7500 parts per full reel). 2. Inductance measured at 100 MHz using an Agilent/HP 4286A impedance analyzer and a Coilcraft SMD-A fixture. 3. DCR is specified per winding. 4.Current per winding that causes a 20°C rise from 25°C ambient. 5.Operating temperature range −40°C to 85°C. 6.Electrical specifications at 25°C. Refer to Doc 362 “Soldering Surface Mount Components” before soldering. 31 66 107 161 226 319 412 510 623 0.10 0.14 0.18 0.22 0.26 0.30 0.34 0.39 0.44 0.126 ±0.004 3,20 ±0,10 2501000 250850 250700 250600 250600 250600 250500 250500 250500 1 2 4 3 0.072 ±0.004 1,83 ±0,10 0.028 0.070 0,71 1,78 1 0.006 0,15 0.038 0,97 0.024 0,61 0.064 1,63 2 1 3 4 0.015 0,38 2 0.063 ±0.004 1,60 ±0,10 4 3 inches Dimensions are in mm Recommended Land Pattern 0.026 0,66 Weight: 36.2 – 37.6 mg Packaging 2000/7″ reel; 7500/13″ reel Plastic tape: 8 mm wide, 0.3 mm thick, 4 mm pocket spacing, 1.9 mm pocket depth US +1-847-639-6400 [email protected] UK +44-1236-730595 [email protected] Taiwan +886-2-2264 3646 [email protected] China +86-21-6218 8074 [email protected] Singapore + 65-6484 8412 [email protected] Document 386-1 Revised 07/13/10 © Coilcraft Inc. 2013 This product may not be used in medical or high risk applications without prior Coilcraft approval. Specification subject to change without notice. Please check web site for latest information. Document 386-2 USB 2.0 Common Mode Filter — 1206 Typical Attenuation (Ref: 50 Ohms) 0 5 10 -113 Attenuation (dB) 15 -872 -672 20 -532 -372 25 -262 -172 30 -102 -371 35 40 Common mode Differential mode (typical for all parts) 45 1 10 Frequency (MHz) 100 1000 100 1000 Typical Impedance vs Frequency 10000 1000 -372 Impedance (Ohms) -532 -672 -872 -113 100 10 -371 -102 -172 -262 1 1 10 Frequency (MHz) US +1-847-639-6400 [email protected] UK +44-1236-730595 [email protected] Taiwan +886-2-2264 3646 [email protected] China +86-21-6218 8074 [email protected] Singapore + 65-6484 8412 [email protected] Document 386-2 Revised 07/13/10 © Coilcraft Inc. 2013 This product may not be used in medical or high risk applications without prior Coilcraft approval. Specification subject to change without notice. Please check web site for latest information.