Document 265-1 Shielded High SRF Inductors – 0805PS • Higher SRF and than our other power inductors • High inductance with tight tolerance • Excellent current handling for a part this size Designer’s Kit C348 contains 6 of each part Core material Ceramic/Ferrite Core and winding loss See www.coilcraft.com/coreloss Terminations RoHS compliant silver-palladium-platinum-glass frit. Weight 57.6 – 62.4 mg Ambient temperature –40°C to +55°C with Irms current Maximum part temperature +105°C (ambient + temp rise) Derating. Storage temperature Component: –40°C to +105°C. Tape and reel packaging: –40°C to +80°C Resistance to soldering heat Max three 40 second reflows at +260°C, parts cooled to room temperature between cycles Moisture Sensitivity Level (MSL) 1 (unlimited floor life at <30°C / 85% relative humidity) Failures in Time (FIT) / Mean Time Between Failures (MTBF) 38 per billion hours / 26,315,789 hours, calculated per Telcordia SR-332 Packaging 1500/7″reel; 7500/13″ reel Plastic tape: 8 mm wide, 0.23 mm thick, 4 mm pocket spacing, 2.34 mm pocket depth PCB washing Tested to MIL-STD-202 Method 215 plus an additional aqueous wash. See Doc787_PCB_Washing.pdf. DCR4 L2 SRF5 Part ±10% Q min3 max typ Isat6 Irms7 number1 (µH) at 1 MHz (Ohms) (MHz) (A) (A) 0805PS-102KL_ 1.0 21 0.14 340 0.901.6 0805PS-152KL_ 1.5 21 0.18 265 0.851.3 0805PS-272KL_ 2.7 21 0.35 190 0.600.88 0805PS-332KL_ 3.3 21 0.50 180 0.550.70 0805PS-392KL_ 3.9 21 0.74 165 0.500.61 0805PS-472KL_ 4.7 21 0.85 155 0.430.59 0805PS-562KL_ 5.6 21 0.91 143 0.380.57 0805PS-682KL_ 6.8 21 1.37 118 0.320.46 0805PS-103KL_10 21 1.51 66 0.27 0.43 0805PS-153KL_15 21 2.04 34 0.22 0.34 0805PS-223KL_22 25 2.48 22 0.18 0.33 0805PS-333KL_33 25 3.00 17 0.16 0.28 0805PS-473KL_47 25 3.85 15 0.15 0.26 0805PS-683KL_68 28 4.42 12 0.12 0.24 0805PS-823KL_82 30 6.00 12 0.11 0.21 0805PS-104KL_100 32 6.96 9.0 0.10 0.19 0805PS-124KL_120 32 7.51 7.7 0.10 0.18 0805PS-154KL_150 32 8.33 5.0 0.08 0.18 0805PS-224KL_220 32 13.71 5.0 0.07 0.14 0805PS-334KL_330 32 20.53 3.5 0.06 0.11 1. When ordering, please specify packaging code: 0805PS-334KLC Packaging:C =7″ machine-ready reel. EIA-481 embossed plastic tape (1500 parts per full reel). B=Less than full reel. In tape, but not machine ready. To have a leader and trailer added ($25 charge), use code letter C instead. D =13″ machine-ready reel. EIA-481 embossed plastic tape. Factory order only, not stocked (7500 parts per full reel). 2. Inductance measured at 100 kHz, 0.1 Vrms, using a Coilcraft SMD‑A fixture in Agilent/HP 4263B LCR meter. 3. Q measured on an Agilent/HP 4291 with an Agilent/HP 16193 test fixture. 4. DCR measured on a micro-ohmmeter and a Coilcraft CCF840 test fixture. 5. SRF measured using an Agilent/HP 8753D network analyzer and a Coilcraft SMD-D test fixture. 6.DC current at 25°C that causes an inductance drop of 10% (typ) from its value without current. Click for temperature derating information. 7.Current that causes a 40°C temperature rise from 25°C ambient. This information is for reference only and does not represent absolute maximum ratings. Click for temperature derating information. 8. Electrical specifications at 25°C. Refer to Doc 362 “Soldering Surface Mount Components” before soldering. US +1-847-639-6400 [email protected] UK +44-1236-730595 [email protected] Taiwan +886-2-2264 3646 [email protected] China +86-21-6218 8074 [email protected] Singapore + 65-6484 8412 [email protected] Document 265-1 Revised 10/12/15 © Coilcraft Inc. 2016 This product may not be used in medical or high risk applications without prior Coilcraft approval. Specification subject to change without notice. Please check web site for latest information. Document 265-2 Power Chip Inductors - 0805PS Series Typical L vs Frequency Typical L vs Current 1000 1000 330 µH 330 µH 100 µH 10 µH 10 3.3 µH 1 µH 1 0.1 0.01 100 µH 100 Inductance (µH) Inductance (µH) 100 10 µH 10 3.3 µH 1 µH 1 1 0.1 0.1 10 1 100 10 Typical Q vs Frequency C D B F 70 E A 50 Q factor H I 60 330 µH J I G 40 100 µH Terminal wraparound: approx 0.010/0,25 both ends 1 µH 30 3.3 µH 20 10 µH 0.1 1 Recommended Land Pattern ABC maxmaxmax D E F G H IJ 0.1330.1180.0790.0530.0800.0500.0200.0700.0400.030 inches 3,383,002,001,352,031,270,511,781,020,76mm 10 0 1000 Current (mA) Frequency (MHz) 10 Frequency (MHz) US +1-847-639-6400 [email protected] UK +44-1236-730595 [email protected] Taiwan +886-2-2264 3646 [email protected] China +86-21-6218 8074 [email protected] Singapore + 65-6484 8412 [email protected] Document 265-2 Revised 10/12/15 © Coilcraft Inc. 2016 This product may not be used in medical or high risk applications without prior Coilcraft approval. Specification subject to change without notice. Please check web site for latest information.