Document 127 Tuning Tools These exclusive tools are ideal for tuning inductors, capacitors and many other variable components. The Trituner™ is a unique 3-in-1 tool. Molded of rugged PET thermoplastic material, one end is stepped with a hex tip for 1/4-28 cores and a smaller hex tip for 10-32 cores. Both have a large surface area to prevent fragile cores from stripping or breaking. The other end has a molded-in ceramic straight tip for 6-32 slotted cores. This provides the strength of steel but is totally non-magnetic. • One tool does the work of three • Non-magnetic ceramic screwdriver tip for durability The Slot Tuner tool has a non-conductive ceramic shaft with a 0.8 mm × 1.3 mm screwdriver tip. The plastic handle has a convenient grip surface and a rotating end to help you make fine adjustments easily. • The ideal tool for all Coilcraft “Slot Seven” parts • Non-magnetic ceramic screwdriver tip for durability Trituner Hex tip for 1/4-28 cores Straight tip for 6-32 slotted cores Hex tip for 10-32 cores 0.197² 0.60² 0.12² dia. 1.095² 0.14² dia. 1.13² 0.14² dia. 1.18² Slot Tuner 0.50² 0.37² 0.12² dia. 80 mm 20 mm Ceramic bit 0.8 mm × 1.3 mm tip 2.45 mm dia. Coilcraft part Recommended tool “Unicoil” 5 mm inductors “Unicoil” 7 mm inductors “Unicoil” 10 mm inductors Trituner Trituner Trituner “Slot Seven” 7 mm inductors “Slot Ten” 10 mm inductors Slot Tuner Trituner 148 Series low profile inductors Trituner Pricing Information Item Trituner Part number 37-1409 1 piece 144 pieces 480 pieces 960 pieces 2400 pieces 4800 pieces Price $2.64 each $1.47 each $1.21 each $1.11 each $1.00 each Quote Item Slot Tuner Part number 37-2182 1 piece 144 pieces 480 pieces 960 pieces 2400 pieces 4800 pieces Specifications subject to change without notice. Please check our website for latest information. © Coilcraft, Inc. 2011 Price $6.37 each $4.22 each $3.69 each $3.17 each $2.90 each Quote Document 127 Revised 08/14/08