A9806-A

Document 319-1
Magnetics for the Infineon GEMINAX
This product is not RoHS-compliant. Contact Coilcraft
for current status or possible alternatives.
The A9807-A is the main component of the high-pass filter
section ensuring that low-frequency, high-level POTS signals do not enter the ADSL front end components.
The Coilcraft A9807-A ADSL transformer and A9806-A
low-pass inductor are designed specifically for Infineon’s
GEMINAX ADSL chipset for use in CO, DLC, and DSLAM
linecard applications.
The A9806-A inductor is the low-pass filter in the Integrated Voice and Data (IVD) GEMINAX chipset.
For free evaluation samples contact Coilcraft or visit www.
coilcraft.com.
ADSL Transformer
Line side
Leakage
DCR max (Ohms)
Part inductance1 inductance2
Turns ratio
number
(mH)
max (µH)
chip side
line side
line : chip
A9807-A
1.40 ±5%
10.0
0.59 (8-6), 0.514 (7-5)
2.15 (1-3, 2-4)
1.333 : 1
Longitudinal
balance
min (dB)
40.0 (20 kHz – 1.1 MHz)
THD
typ (dB)
−80 @ 30 kHz
Dielectric
strength
(V)
1500
Designed
to meet
UL 1950, EN 60950
1.Inductance measured at 10.0 kHz, 0.1 Vrms, 0.03 Adc.
2.Leakage inductance measured at 100.0 kHz, 0.1 Vrms.
3.Operating temperature range −40°C to +85°C.
4.Electrical specifications at 25°C.
Recommended
Land Pattern
0.430
max
10,9
1
4
Dot over
pin 1
0.028
0,7
0.520 max
13,2
8
0.520
13,2
0.417
10,6
5
0.051
1,3
0.098
2,5
0.355 max
9,0
0.004/0,10
Tape and reel:350/13″ reel 32 mm tape width
For packaging data see Tape and Reel Specifications section.
Document 319-1 Revised 11/19/15
Document 319-2
Magnetics for the Infineon GEMINAX Chipset
Low-Pass Inductor
Leakage
DCR max (Ohms) Part Inductance1 inductance2
Turns ratio
number
(mH)
max (µH)
chip side
line side
chip : line
A9806-A
6.8 ±10%
300.0
5.06 (4-6)
5.06 (1-3)
1 : 1
Capacitance3THD
max (pF)
typ (dB)
5.0
−80 @ 30 kHz
Dielectric
strength
(V)
1500
Designed
to meet
UL 1950
1.Inductance measured at 10.0 kHz, 0.1 Vrms, 0.1 Adc.
2.Leakage inductance measured at 100.0 kHz, 0.1 Vrms.
3.Capacitance measured at 100.0 kHz, 0.1 Vrms.
4.Operating temperature range −40°C to +85°C.
5.Electrical specifications at 25°C.
0.410
max
10,4
4
Recommended
Land Pattern
6
Dot over
pin 1
0.520 max
13,2
3
0.028
0,7
0.520
13,2
0.417
10,6
1
0.051
1,3
0.098
2,5
0.355 max
9,0
0.004/0,10
Tape and reel:450/13″ reel 24 mm tape width
For packaging data see Tape and Reel Specifications section.
Document 319-2 Revised 11/19/15