ADSL Magnetics For Analog Devices AD20MSP910 • Designed to meet UL 1950 and EN60950 safety requirements for supplementary insulation at 250V • UL file number E150991 • Minimum interwinding breakdown voltage of 1500 Vrms • CO and CPE applications require two each of the S560-6600-30 or 0560-6600-63 TM00302 • Operating temperature range: -40° C to +85° C • Meets IEC 695, 2-2 flammability requirements • PWB Process Capability: standard printed wiring board assembly techniques, total-immersion cleaning • Reliability testing: shock, vibration, temperature cycling, temperature - humidity - bias ELECTRICAL SPECIFICATIONS AT 25° C Part Number Turns Ratio ± 2% Inductance1 mH ±10% Leakage Inductance2 µH max Chip : Line Chip Side Chip Side Chip Side Package DCR Ω Max Interwinding Capacitance3 Longitudinal Balance4 db min Insertion Loss4 dB max Frequency Response4 dB Harmonic Distortion4 dB max Line Side pF max 10 kHz 1.1 MHz 300 kHz 30 kHz - 1.1 MHz 30 kHZ 4Vrms S560-6600-30 SMD 1:1 5 16.5 4 4 60 46 0.5 ± 0.5 -80 0560-6600-63 THT 1:1 5 16.5 4 4 60 46 0.5 ± 0.5 -80 All measurements are made with pins 2 and 3 connected and pins 8 and 9 connected 1. Inductance measured at 10kHz, 0.1 Vac 2. Leakage inductance measured at 100kHz, 0.1 Vac 3. Interwinding capacitance measured at 1kHz, 1 Vac 4. Measurements made with 100Ω source and 100Ω load impedance. SCHEMATIC S560-6600-30 0560-6600-63 1 10 3 8 2 9 4 7 CHIP SIDE LINE SIDE ©2001Bel Fuse Inc. Specifications subject to change without notice. 02.01 Bel Fuse Inc. 198 Van Vorst Street, Jersey City, NJ 07302 • Tel 201-432-0463 • Fax 201-432-9542 • www.belfuse.com T3-17 ADSL Magnetics For Analog Devices AD20MSP910 TM00302 MECHANICAL SUGGESTED PCB PAD LAYOUT 5 1 S560-6600-30 0.100 (2.54) 0.741 (18.82) 0.100 (2.54) 0.087 (2.21) 0.060 (1.52) 6 10 0.028 (0.71) 0.585 (14.86) MAX 0.540 (13.72) MAX 0.500 (12.70) MAX 0.005 (0.13) 10 EDGES 0.606 (15.39) 0.699 (17.75) MAX 1 5 0560-6600-63 6 10 0.550 (13.97) MAX 0.525 (13.34) MAX 0.500 (12.70) MAX 0.020 (0.508) SQ. TYP (PHOSPHER BRONZE, SOLDER COATED 0.110±0.010 (2.79±0.25) 0.394 (10.00) 0.098 (2.50) ©2001 Bel Fuse Inc. Specifications subject to change without notice. 02.01 CORPORATE FAR EAST EUROPE Bel Fuse Inc. 198 Van Vorst Street Jersey City, NJ 07302 Tel 201-432-0463 Fax 201-432-9542 www.belfuse.com Bel Fuse Ltd. 8F / 8 Luk Hop Street San Po Kong Kowloon, Hong Kong Tel 852-2328-5515 Fax 852-2352-3706 www.belfuse.com Bel Fuse Europe Ltd. Preston Technology Management Centre Marsh Lane, Suite G7, Preston Lancashire, PR1 8UD, U.K. Tel 44-1772-556601 Fax 44-1772-888366 www.belfuse.com T3-18