MSS1048T

Document 844-1
RE
U
T
A
R
E
P
M
E
HIGH T
Shielded Power Inductors – MSS1048T
• 10.0 × 10.2 mm footprint; 4.8 mm high shielded inductors
• Designed for ambient temperatures up to 165°C.
• AEC-Q200 qualified
• Very low DCR and excellent current handling
Core material Ferrite
Core and winding loss See www.coilcraft.com/coreloss
Terminations RoHS compliant matte tin over nickel over copper.
Other terminations available at additional cost.
Weight: 1.7 – 1.9 g
Ambient temperature –40°C to +125°C with (40°C rise) Irms current.
Maximum part temperature +165°C (ambient + temp rise). Derating.
Storage temperature Component: –40°C to +165°C.
Tape and reel packaging: –40°C to +80°C
Resistance to soldering heat Max three 40 second reflows at
+260°C, parts cooled to room temperature between cycles
Moisture Sensitivity Level (MSL) 1 (unlimited floor life at <30°C /
85% relative humidity)
Failures in Time (FIT) / Mean Time Between Failures (MTBF)
38 per billion hours / 26,315,789 hours, calculated per Telcordia SR-332
Packaging 200/7″ reel; 800/13″ reel; Plastic tape: 24 mm wide,
0.35 mm thick, 16 mm pocket spacing, 5.1 mm pocket depth
PCB washing Tested to MIL-STD-202 Method 215 plus an additional
aqueous wash. See Doc787_PCB_Washing.pdf.
4
5
Isat (A) Irms (A)
DCR SRF
Inductance2max typ3 10%20%30% 20°C40°C
Part number1 (µH)(m)(MHz) dropdropdrop rise rise
MSS1048T-801NL_ 0.8 ±30%
4.3 180
9.6012.0 14.1 8.19 12.0
MSS1048T-152NL_ 1.5 ±30%
5.1 90
5.44 7.8010.5 7.41 10.8
MSS1048T-222NL_ 2.2 ±30%
7.2 70
4.92 6.62 8.40 6.63 9.78
MSS1048T-332NL_ 3.3 ±30% 10.0 50
4.62 6.32 7.38 5.04 7.22
MSS1048T-472NL_ 4.7 ±30% 11.5 38
4.36 5.62 6.46 4.90 6.90
MSS1048T-682NL_ 6.8 ±30% 16.3 35
3.60 5.00 5.94 4.52 6.01
MSS1048T-822NL_ 8.2 ±30% 20.0 28
3.14 4.14 4.84 4.38 5.71
MSS1048T-103ML_ 10 ±20%
23.0 24 3.083.844.32 3.99 4.79
MSS1048T-153ML_ 15 ±20%
36.0 20 2.463.063.44 3.51 4.26
MSS1048T-223ML_ 22 ±20%
50.0 12 2.362.903.28 2.86 3.58
MSS1048T-333ML_ 33 ±20%
68.0 11 1.662.142.42 2.12 2.80
MSS1048T-473ML_ 47 ±20% 120 10 1.441.862.20 1.83 2.42
MSS1048T-563ML_ 56 ±20% 126 10 1.361.701.90 1.71 2.28
MSS1048T-683ML_ 68 ±20% 176
7.0 1.281.601.70 1.39 1.88
MSS1048T-823ML_ 82 ±20% 196
6.0 1.081.441.64 1.23 1.67
MSS1048T-104ML_100 ±20% 224
6.0 0.991.201.36 1.09 1.48
MSS1048T-154KL_150 ±10% 330
5.0 0.791.021.16 0.97 1.33
MSS1048T-184KL_180 ±10% 360
4.5 0.750.921.02 0.89 1.24
MSS1048T-224KL_220 ±10% 394
4.5 0.670.840.95 0.85 1.18
MSS1048T-334KL_330 ±10% 748
3.0 0.570.690.76 0.57 0.82
MSS1048T-474KL_470 ±10% 886
2.7 0.430.520.62 0.50 0.72
1. Please specify termination and packaging codes:
MSS1048T-334KLC
Termination:L=RoHS compliant matte tin over
nickel over copper.
Special order:
T = RoHS tin-silver-copper
(95.5/4/0.5) or
S = non-RoHS tin-lead (63/37).
Packaging:C
=7″ machine-ready reel. EIA-481
embossed plastic tape (200 parts
per full reel).
B=Less than full reel. In tape, but not
machine ready. To have a leader
and trailer added ($25 charge),
use code letter C instead.
D
=13″ machine-ready reel. EIA-481
embossed plastic tape. Factory
order only, not stocked (800 parts
per full reel).
2. Inductance measured at 100 kHz, 0.1 Vrms,
0 Adc using an Agilent/HP 4263B LCR meter or
equivalent.
3. SRF measured using an Agilent/HP 8753D or
equivalent.
4. DC current at 25°C that causes the specified
inductance drop from its value without current.
Click for temperature derating information.
5. Current that causes the specified temperature rise
from 25°C ambient. This information is for reference
only and does not represent absolute maximum
ratings. Click for temperature derating information.
6. Electrical specifications at 25°C.
Refer to Doc 362 “Soldering Surface Mount Components”
before soldering.
US +1-847-639-6400 [email protected]
UK +44-1236-730595 [email protected]
Taiwan +886-2-2264 3646 [email protected]
China +86-21-6218 8074 [email protected]
Singapore + 65-6484 8412 [email protected]
Document 844-1 Revised 03/31/16
© Coilcraft Inc. 2016
This product may not be used in medical or high
risk applications without prior Coilcraft approval.
Specification subject to change without notice.
Please check web site for latest information.
Document 844-2
RE
U
T
A
R
E
P
M
E
HIGH T
Shielded Power Inductors – MSS1048T
Typical L vs Current
Typical L vs Frequency
1000
1000
330 µH
100 µH
100
Inductance (µH)
Inductance (µH)
330 µH
33 µH
10 µH
10
3.3 µH
0.8 µH
1
0.1
0.1
100 µH
100
33 µH
10 µH
10
3.3 µH
0.8 µH
1
10
1
100
0.1
0.01
Current (A)
0.402 ±0.012 *
10,2 ±0,3
Dash
number
123
X
Internal
code
1
0.1
10
Frequency (MHz)
Parts manufactured prior
to Sept. 2007 were marked
with only the dash number.
0.394 ±0.012 *
10,0 ±0,3
0.189 ±0.012
4,8 ±0,3
Recommended
Land Pattern
0.051 ±0.008
1,3 ±0,2
0.14
3,56
0.118 ±0.008
3,0 ±0,2
0.37
9,40
0.311 ±0.012
7,9 ±0,3
0.07
1,78
* Dimensions are of the case not including the termination.
For maximum overall dimensions including the termination,
add 0.005 in / 0,13 mm.
Dimensions are in
inches
mm
US +1-847-639-6400 [email protected]
UK +44-1236-730595 [email protected]
Taiwan +886-2-2264 3646 [email protected]
China +86-21-6218 8074 [email protected]
Singapore + 65-6484 8412 [email protected]
Document 844-2 Revised 03/31/6
© Coilcraft Inc. 2016
This product may not be used in medical or high
risk applications without prior Coilcraft approval.
Specification subject to change without notice.
Please check web site for latest information.