Document 482-1 Shielded Power Inductors – SLC1480 • Requires a mere quarter square inch of board space • Handles current as high as 130 A. • Ideal for use in multi-phase VRM/VRD regulators Designer’s Kit C467 contains 3 each of select values. Core material Ferrite Terminations RoHS compliant matte tin over nickel over copper. Other terminations available at additional cost. Weight 5.25 g Ambient temperature –40°C to +85°C with (40°C rise) Irms current. Maximum part temperature +125°C (ambient + temp rise). Derating. Storage temperature Component: –40°C to +125°C. Tape and reel packaging: –40°C to +80°C Resistance to soldering heat Max three 40 second reflows at +260°C, parts cooled to room temperature between cycles Moisture Sensitivity Level (MSL) 1 (unlimited floor life at <30°C / 85% relative humidity) Failures in Time (FIT) / Mean Time Between Failures (MTBF) 38 per billion hours / 26,315,789 hours, calculated per Telcordia SR-332 Packaging 500/13″ reel; Plastic tape: 24 mm wide, 0.4 mm thick, 16 mm pocket spacing, 8.1 mm pocket depth PCB washing Tested to MIL-STD-202 Method 215 plus an additional aqueous wash. See Doc787_PCB_Washing.pdf. Part number1 Inductance2 ±20% (nH) SLC1480-111ML_ 110 SLC1480-131ML_130 SLC1480-151ML_ 150 SLC1480-171ML_ 170 SLC1480-201ML_ 200 SLC1480-231ML_ 230 SLC1480-261ML_ 260 SLC1480-301ML_ 300 SLC1480-321ML_ 320 SLC1480-441ML_ 440 (mOhms)3 Isat (A)5 SRF typ4 min max (MHz) 10% drop 20% drop 30% drop DCR SLC1480-321MLD Packaging:D=13″ machine-ready reel. EIA-481 embossed plastic tape (500 per full reel). B =Less than full reel. In tape, but not machine ready. To have a leader and trailer added ($25 charge), use code letter C instead. 2. Inductance tested at 100 kHz, 0.1 Vrms using an Agilent/HP 4284. 3. DCR is measured between the two points indicated below. (A)6 20°C rise 40°C rise 0.15 0.21130110128130 0.150.21 110 97 110 112 0.15 0.21 108889597 0.15 0.2175808790 0.15 0.2168657276 0.15 0.2159576467 0.15 0.2150505761 0.15 0.2146424952 0.15 0.2142384448 0.15 0.2135283235 1. When ordering, please specify packaging code: Irms 3955 39 55 39 55 39 55 39 55 39 55 39 55 39 55 39 55 39 55 4. SRF measured using an Agilent/HP 8753ES network analyzer or equivalent. 5. DC current at 25°C that causes the specified inductance drop from its value without current. Click for temperature derating information. 6. Current that causes the specified temperature rise from 25°C ambient. This information is for reference only and does not represent absolute maximum ratings. Click for temperature derating information. 7. Electrical specifications at 25°C. Refer to Doc 362 “Soldering Surface Mount Components” before soldering. Points used for measuring DCR US +1-847-639-6400 [email protected] UK +44-1236-730595 [email protected] Taiwan +886-2-2264 3646 [email protected] China +86-21-6218 8074 [email protected] Singapore + 65-6484 8412 [email protected] Document 482-1 Revised 09/14/15 © Coilcraft Inc. 2016 This product may not be used in medical or high risk applications without prior Coilcraft approval. Specification subject to change without notice. Please check web site for latest information. Document 482-2 Shielded Power Inductors – SLC1480 Series L vs Current L vs Frequency 0.510 max 12,95 0.530 max 13,46 XXX Dash number X Internal code 0.315 max 8,00 0.200 5,08 0.195 4,95 0.580 14,73 0.195 4,95 0.140 3,56 0.250 6,35 Dimensions are in inches mm Recommended Land Pattern US +1-847-639-6400 [email protected] UK +44-1236-730595 [email protected] Taiwan +886-2-2264 3646 [email protected] China +86-21-6218 8074 [email protected] Singapore + 65-6484 8412 [email protected] Document 482-2 Revised 09/14/15 © Coilcraft Inc. 2016 This product may not be used in medical or high risk applications without prior Coilcraft approval. Specification subject to change without notice. Please check web site for latest information.