XAL6020

Document 801-1
Shielded Power Inductors – XAL6020
• High current and very low DCR
• Very low profile – only 2 mm tall
• Soft saturation, perfect for VRM/VRD applications
Core material Composite
Environmental RoHS compliant, halogen free
Terminations RoHS compliant tin-silver (96.5/3.5) over copper. Other
terminations available at additional cost.
Weight 0.6 – 0.7 g
Ambient temperature –40°C to +125°C with (40°C rise) Irms current.
Maximum part temperature +165°C (ambient + temp rise). Derating.
Storage temperature Component: –40°C to +165°C.
Tape and reel packaging: –40°C to +80°CResistance to soldering
heat Max three 40 second reflows at +260°C, parts cooled to room
temperature between cycles
Moisture Sensitivity Level (MSL) 1 (unlimited floor life at <30°C /
85% relative humidity)
Failures in Time (FIT) / Mean Time Between Failures (MTBF)
38 per billion hours / 26,315,789 hours, calculated per Telcordia SR-332
Packaging 500/7″ reel; 1500/13″ reel Plastic tape: 16 mm wide,
0.3 mm thick, 12 mm pocket spacing, 2.16 mm pocket depth
PCB washing Tested to MIL-STD-202 Method 215 plus an additional
aqueous wash. See Doc787_PCB_Washing.pdf.
DCR (mOhms)3
Irms (A)6
Inductance2 SRF typ4
Isat5
Part number1
±20% (µH)
typ max
(MHz)
(A) 20°C rise 40°C rise
XAL6020-121ME_
0.12 1.60
1.85 1654521.027.0
XAL6020-141ME_ has been changed to XAL6020-121ME_. The XAL6020-141 is not available.
XAL6020-161ME_
0.16 2.35
2.70 1524120.026.0
XAL6020-271ME_0.27
3.453.85
97 29.519.0 25.0
XAL6020-321ME_ has been changed to XAL6020-271ME_. The XAL6020-321 is not available.
XAL6020-451ME_0.45
4.605.05
73 24.517.0 22.0
XAL6020-601ME_0.60
6.457.10
66 20.515.0 18.5
XAL6020-901ME_ 0.90
10.6311.10
56 19.1 11.5 15.2
XAL6020-112ME_ 1.1
12.6013.10
50 17.1 10.0 12.0
1. When ordering, please specify packaging code:
Irms Testing
Irms testing was performed on
0.75 inch wide × 0.25 inch thick
copper traces in still air.
Temperature rise is highly
dependent on many factors
including pcb land pattern, trace
size, and proximity to other
components. Therefore temperature rise should be verified
in application conditions.
XAL6020-112MEC
Packaging:C
=7″ machine-ready reel. EIA-481 embossed plastic tape (500 parts per full reel).
B=Less than full reel. In tape, but not machine ready. To have a leader and trailer added
($25 charge), use code letter C instead.
D
=13″ machine-ready reel. EIA-481 embossed plastic tape. Factory order only, not stocked
(2000 parts per full reel).
2. Inductance tested at 100 kHz, 0.1 Vrms, 0 Adc.
3. DCR measured on a micro-ohmmeter.
4. SRF measured using Agilent/HP 4395A or equivalent.
5. DC current at 25°C that causes an inductance drop of 30% (typ) from its value without current.
Click for temperature derating information.
6. Current that causes the specified temperature rise from 25°C ambient. This information is for reference only
and does not represent absolute maximum ratings. Click for temperature derating information.
7. Electrical specifications at 25°C.
Refer to Doc 362 “Soldering Surface Mount Components” before soldering.
US +1-847-639-6400 [email protected]
UK +44-1236-730595 [email protected]
Taiwan +886-2-2264 3646 [email protected]
China +86-21-6218 8074 [email protected]
Singapore + 65-6484 8412 [email protected]
Document 801-1 Revised 03/21/16
© Coilcraft Inc. 2016
This product may not be used in medical or high
risk applications without prior Coilcraft approval.
Specification subject to change without notice.
Please check web site for latest information.
Document 801-2
Shielded Power Inductors – XAL6020
Inductance (µH)
0.15
Inductance (µH)
0.20
0.12 µH
0.10
0.05
0
0
5
10
15
30
25
20
Current (A)
45
40
35
50
Inductance (µH)
0.30
0.25
0.20
0.16 µH
0.15
0.10
0.05
0
0
5
10
35
30
25
20
15
Current (A)
40
45
0.6
Inductance (µH)
Inductance (µH)
Inductance (µH)
Inductance (µH)
L vs Current
0.5
0.4
0.3
0.27 µH
0.2
0.1
0
0
5
10
15
20
Current (A)
25
30
35
40
0.8
0.6
0.60 µH
0.4
0.2
0
0
2
4
6
8
10 12 14 16 18 20 22 24 26 28 30
Current (A)
1.2
1.0
0.8
0.90 µH
0.6
0.4
0.2
0
1.6
1.4
1.2
1.0
0.8
0.6
0.4
0.2
0
0
5
10
15
20
25
15
20
25
Current (A)
1.1 µH
0
5
10
Current (A)
0.6
0.5
0.4
0.3
0.45 µH
0.2
0.1
0
0
5
10
15
20
Current (A)
25
30
35
US +1-847-639-6400 [email protected]
UK +44-1236-730595 [email protected]
Taiwan +886-2-2264 3646 [email protected]
China +86-21-6218 8074 [email protected]
Singapore + 65-6484 8412 [email protected]
Document 801-2 Revised 03/21/16
© Coilcraft Inc. 2016
This product may not be used in medical or high
risk applications without prior Coilcraft approval.
Specification subject to change without notice.
Please check web site for latest information.
Document 801-3
Shielded Power Inductors – XAL6020
L vs Frequency
0.250 ±0.008
6,36 ±0,2
3
Inductance (µH)
XXX
1.1 µH
0.90 µH
0.60 µH
0.45 µH
1
0.258 ±0.008
6,56 ±0,2
0.27 µH
Indicates orientation
of terminations
Dash
number
0.16 µH
0.12 µH
0.083
max
2,1
0.1
0.05
1
10
100
Frequency (MHz)
0.049 ±0.002
1,25 ±0,05
0.110 ±0.01
2,79 ±0,25
1000
0.159
4,04
0.216
5,50
See
table
Dash
number
-121
-161
-271
-451
-601
-901
-112
0.197
typ
5,0
Terminal
thickness (typ)
(in / mm)
0.0106 / 0.27
0.0071 / 0.18
0.0071 / 0.18
0.0071 / 0.18
0.0047 / 0.12
0.0039 / 0.10
0.0039 / 0.10
0.056
1,43
Recommended
Land Pattern
US +1-847-639-6400 [email protected]
UK +44-1236-730595 [email protected]
Taiwan +886-2-2264 3646 [email protected]
China +86-21-6218 8074 [email protected]
Singapore + 65-6484 8412 [email protected]
Dimensions are in inches
mm
Document 801-3 Revised 03/21/16
© Coilcraft Inc. 2016
This product may not be used in medical or high
risk applications without prior Coilcraft approval.
Specification subject to change without notice.
Please check web site for latest information.