XAL6030

Document 887-1
RE
U
T
A
R
E
P
M
E
T
HIGH
Shielded Power Inductors – XAL60xx
• High current; very low DCR
• Soft saturation
• AEC-200 Grade 1 qualified (–40°C to +125°C ambient)
Designer’s Kit C442 contains 3 each of all values.
Core material Composite
Environmental RoHS compliant, halogen free
Terminations RoHS compliant tin-silver (96.5/3.5) over copper.
Other terminations available at additional cost.
Ambient temperature –40°C to +125°C with (40°C rise) Irms current.
Maximum part temperature +165°C (ambient + temp rise). Derating.
Storage temperature Component: –40°C to +165°C.
Tape and reel packaging: –40°C to +80°CResistance to soldering
heat Max three 40 second reflows at +260°C, parts cooled to room
temperature between cycles
Moisture Sensitivity Level (MSL) 1 (unlimited floor life at <30°C /
85% relative humidity)
Failures in Time (FIT) / Mean Time Between Failures (MTBF)
38 per billion hours / 26,315,789 hours, calculated per Telcordia SR-332
PCB washing Tested to MIL-STD-202 Method 215 plus an additional
aqueous wash. See Doc787_PCB_Washing.pdf.
DCR (mOhms)3
Irms (A)6
Inductance2 SRF typ4 Isat5
Part number1
±20% (µH)
typ max
(MHz)
(A)
20°C rise 40°C rise
XAL6030-181ME_ 0.18 1.591.75 141 39.0 24 32
XAL6030-331ME_ 0.33 2.302.53 89 30.0 20 25
XAL6030-561ME_ 0.56 3.013.31 61 29.0 17 22
XAL6030-102ME_ 1.0
5.626.18 50 23.0 13 18
XAL6030-122ME_ 1.2
6.827.50 43 22.0 12 16
XAL6030-182ME_ 1.8
9.5710.52
34 18.2 10
14
XAL6030-222ME_ 2.2
12.7013.97
30 15.9 7.0 10
XAL6030-332ME_ 3.3
19.9220.81
26 12.2 6.0
8.0
XAL6060-472ME_ 4.7
13.1014.40
21 10.5 8.0 11
XAL6060-562ME_ 5.6
14.4615.90
20 9.9 7.5 10
XAL6060-682ME_ 6.8
18.9020.80
18 9.2 7.0
9.0
XAL6060-822ME_ 8.2
24.00
26.40
16
8.4
6.0
8.0
XAL6060-103ME_ 10
27.0029.82
14 7.6 5.0
7.0
XAL6060-153ME_ 15
39.7743.75
11 5.8 4.5
6.0
XAL6060-223ME_ 22
55.1260.63
9 5.6 3.6
5.0
Irms Testing
Irms testing was performed on
0.75 inch wide × 0.25 inch thick
copper traces in still air.
Temperature rise is highly
dependent on many factors
including pcb land pattern, trace
size, and proximity to other components. Therefore temperature
rise should be verified in application conditions.
1. When ordering, please specify termination and packaging codes:
XAL6060-223MEC
Termination:E=RoHS compliant tin-silver over copper.
Special order: T = RoHS tin-silver-copper (95.5/4/0.5) or S = non-RoHS tin-lead (63/37).
Packaging:C
=7″ machine-ready reel. EIA-481 embossed plastic tape.
B=Less than full reel. In tape, but not machine ready. To have a leader and trailer added
($25 charge), use code letter C instead.
D
=13″ machine-ready reel. EIA-481 embossed plastic tape. Factory order only, not stocked.
2. Inductance tested at 100 kHz, 0.1 Vrms, 0 Adc.
3. DCR measured on a micro-ohmmeter.
4. SRF measured using Agilent/HP 4395A or equivalent.
5. DC current at 25°C that causes an inductance drop of 30% (typ) from its value without current.
Click for temperature derating information.
6. Current that causes the specified temperature rise from 25°C ambient. This information is for reference only
and does not represent absolute maximum ratings. Click for temperature derating information.
7. Electrical specifications at 25°C.
Refer to Doc 362 “Soldering Surface Mount Components” before soldering.
Document 887-1 Revised 07/08/15
Document 887-2
URE
T
A
R
E
P
M
E
T
HIGH
Shielded Power Inductors – XAL60xx
0.20
Inductance (µH)
0.30
0.25
0.18 µH
0.15
0.10
0.05
0
0
5
10
15
20
Current (A)
25
30
35
40
Inductance (µH)
0.6
0.5
0.4
0.33 µH
0.3
0.2
0.1
0
0
5
10
15
20
Current (A)
25
30
35
40
Inductance (µH)
0.8
0.6
0.56 µH
0.4
0.2
0
1.6
1.4
1.2
1.0
0.8
0.6
0.4
0.2
0
0
5
10
15
20
Current (A)
25
30
35
40
1.0 µH
0
2
4
6
8
10 12 14 16 18 20 22 24 26 28 30
Current (A)
Inductance (µH)
Inductance (µH)
Inductance (µH)
Inductance (µH)
Inductance (µH)
L vs Current
1.6
1.4
1.2
1.0
0.8
0.6
0.4
0.2
0
1.2 µH
0
2
4
6
10 12 14 16 18 20 22 24 26 28 30
8
Current (A)
2.4
2.0
1.6
1.2
1.8 µH
0.8
0.4
0
0
2
4
6
10 12 14 16 18 20 22 24 26 28 30
8
Current (A)
3.0
2.5
2.0
2.2 µH
1.5
1.0
0.5
0
0
2
4
6
8
10
12
14
16
18
20
12
14
16
18
20
Current (A)
5
4
3
3.3 µH
2
1
0
0
2
4
6
8
10
Current (A)
Document 887-2 Revised 07/08/15
Document 887-3
URE
T
A
R
E
P
M
E
T
HIGH
Shielded Power Inductors – XAL60xx
8
7
6
5
4
3
2
1
0
0
1
2
3
4
5
6
7
Current (A)
8
9
10
11 12
5.6 µH
0
1
2
3
4
5
6
7
Current (A)
8
9
10
11 12
10
8
6
6.8 µH
4
2
0
Inductance (µH)
Inductance (µH)
4.7 µH
Inductance (µH)
8
7
6
5
4
3
2
1
0
Inductance (µH)
Inductance (µH)
Inductance (µH)
Inductance (µH)
L vs Current
1
2
3
4
5
6
7
Current (A)
8
9
10
11 12
16
12
10 µH
8
4
0
0
1
2
3
4
5
6
7
Current (A)
8
9
10
20
16
12
15 µH
8
4
0
0
1
2
3
4
Current (A)
5
6
7
8
5
6
7
8
30
25
20
22 µH
15
10
5
0
0
1
2
3
4
Current (A)
12
10
8
8.2 µH
6
4
2
0
0
1
2
3
4
5
6
Current (A)
7
8
9
10
Document 887-3 Revised 07/08/15
Document 887-4
URE
T
A
R
E
P
M
E
T
HIGH
Shielded Power Inductors – XAL60xx
Typical L vs Frequency
100
0.250 ±0.008
6,36 ±0,2
22 µH
15 µH
Inductance (µH)
5.6 µH
4.7 µH
3.3 µH
2.2 µH
1.8 µH
1.2 µH
1.0 µH
10
1
XXX
10 µH
Indicates orientation
of terminations
Dash
number
0.049 ±0.002
1,25 ±0,05
0.110 ±0.01
2,79 ±0,25
0.18 µH
0.1
1
10
Frequency (MHz)
Maximum
height
(in / mm) Weight (g)
XAL6030 0.122 / 3,1 0.60 – 0.70
XAL6060 0.240 / 6,1 1.2 – 1.3
See height
table
0.56 µH
0.33 µH
0.1
0.258 ±0.008
6,56 ±0,2
100
0.159
4,04
0.216
5,50
0.056
1,43
Recommended
Land Pattern
See
table
Dash
number
-181
-331
-561
-102
-122
-182
-222
-332
-472
-562
-682
-822
-103
-153
-223
0.197
typ
5,0
Terminal
thickness (typ)
(in / mm)
0.0106 / 0.27
0.0106 / 0.27
0.0106 / 0.27
0.0071 / 0.18
0.0071 / 0.18
0.0059 / 0.15
0.0047 / 0.12
0.0039 / 0.10
0.0071 / 0.18
0.0071 / 0.18
0.0059 / 0.15
0.0047 / 0.12
0.0047 / 0.12
0.0039 / 0.10
0.0039 / 0.10
Dimensions are in inches
mm
Packaging
XAL6030 400/7″reel; 1500/13″ reel Plastic tape: 16 mm wide,
0.3 mm thick, 12 mm pocket spacing, 3.12 mm pocket depth
XAL6060 250/7″ reel; 750/13″ reel Plastic tape: 16 mm wide,
0.3 mm thick, 12 mm pocket spacing, 6.23 mm pocket depth
Document 887-4 Revised 07/08/15