CLAMPS 7C SERIES These quick-operating clamps speed installation and maintenance of wire bundles, hose, tubing, cable and conduits. They provide split-second access to clamped material with accepted, proven, vibration-proof Camloc 1/4-turn fasteners, which are available in a variety of hand- and tool-operated head styles. Some styles have liners that allow positive clamping of material without damage. Features: 1/4-turn access to wire bundles, tubing, cable, etc. Sizes 1/4" to 1-1/2.” Available unlined, or with Neoprene or Stainless Steel liners. Hand or tool actuated head styles. Wide clamping area and rounded edges prevent scarring or cutting ● ● ● ● 7C Series clamps are easily mounted; in most cases they mount with a single screw, rivet or spot weld. ● Unlined. 7C1-*. 1/2" to 1-1/2" Nominal Clamp Size. ● ● ● Single Hole Mounting Passivated Stainless Steel Temperatures to 450° F. Head Styles: Ordering Information: Head Style Slotted #2 Cross Recess Wing Part No. 7C1-* 7C1-*C 7C1-* *Select dash number for clamp size from Selection & Dimension Table below. Selection & Dimension Table Nominal Clamp Size 1/2 *Dash No. A Ref. B ± .02 C ± .03 E ± .02 K± .010 N ± .03 -8 .500 .42 1.66 1.29 .698 5/8 -10 † .625 .42 1.80 1.56 3/4 -12 .750 .42 1.95 7/8 -14 † .875 .42 -16 1.000 1 7C1-#W 1.29 .0348 .0375 .698 1.29 .0372 .0399 1.56 .698 1.29 .0422 .0449 2.01 1.74 .698 1.29 .0464 .0491 .46 2.18 1.89 .704 1.30 .0520 .0597 1-1/8 -18 1.125 .47 2.29 2.03 .704 1.30 .0574 .0663 1-1/4 -20 1.250 .50 2.46 2.18 .704 1.30 .0649 .0756 1-3/8 -22 1.375 .52 2.57 2.32 .716 1.31 .0666 .0792 1-1/2 -24 1.500 .52 2.71 2.47 .716 1.31 .0769 .0900 Dash number 10 clamp is also available with a .275 .263 F-1 Weight (lbs.) 7C1-# Dia. mounting hole; specify 7C1-10D. CLAMPS Unlined. 7C1-4. 1/4" Nominal Clamp Size. ● ● ● 7C SERIES Head Styles: Single Hole Mounting Passivated Stainless Steel Temperatures to 750°F. Ordering Information: B Diameter .198 .191 .134 .128 .257 .251 .198 .191 .198 .191 Head Style Part No. Weight (lbs.) Slotted 7C1-4 .0074 Slotted 7C1-4A .0074 Slotted 7C1-4B .0074 3/16 Hex, Slotted 7C1-4H .0074 Wing 7C1-4W .0101 7C31-1AA. 1/4" Nominal Clamp Size. • Double Hole-Mounting • Passivated Stainless Steel • Temperatures to 750°F. Head Style: Ordering Information: Head Style Part No. Weight (lbs.) Slotted 7C31-1AA .0074 F 7C1-6. 3/8" Nominal Clamp Size. • Single Hole Mounting • Passivated Stainless Steel • Temperatures to 450°F. Head Styles: Ordering Information: Head Style Slotted Wing Part No. 7C1-6 7C1-6W Weight (lbs.) .0241 .0268 F-2 CLAMPS 7C SERIES Curved or Flat Surface Mounting. 7C61. .245" Nominal Clamp Size. • Mounts on Curved or Flat Surfaces • Passivated Stainless Steel • Temperatures to 750°F. Ordering Information: Mounting Flange Curved .230R Curved .230R Flat Curved .18R Flat 7C60. .245" x 2 Nominal Clamp Size. • Dual, Quick-Access Clamp • Mounts on Curved or Flat Welding to Curved Surface • Passivated Stainless Steel • Temperatures to 750°F. Ordering Information: Ordering Information: A Diameter .146-.156 .129-.139 None Flat Flat Flat None .146-.156 .129-.139 F-3 B Diameter 1.39 1.44 Part No. 7C60-1-1AA 7C60-1-2AA 7C60-1-3AA 7C60-2-3AA 7C60-2-1AA 7C60-2-2AA Part No. 7C61-1-1AA 7C61-1-2AA 7C61-2-2AA 7C61-3-2AA 7C61-2-1AA 7C70. .245" x 2 Nominal Clamp Size. • Dual, Quick-Access Clamp • Short Mounting Tabs for Surfaces • Passivated Stainless Steel • Temperatures to 750°F. Mounting Flange Curved Curved Curved A Diameter .146-.156 None None none .146-.156 Mounting Flange Curved Flat Part No. 7C70-4-1AA 7C70-4-2A CLAMPS 7C SERIES Neoprene Liners. 7C27-5. 5/16" Nominal Clamp Size. • • • • Head Styles: Neoprene Liner Single Mounting Hole Passivated Stainless Steel Temperatures to 212°F. Ordering Information: Head Style Slotted Wing Part No. 7C27-5AA 7C27-5BA Weight (lbs.) .0402 .0429 7C27-✻.3/8" to 1-3/8" Nominal Clamp Size. • • • • Head Styles: Neoprene Liner Single Mounting Hole Passivated Stainless Steel Temperatures to 212°F. Ordering Information: Head Style Slotted Wing Part No. 7C27-✻A 7C27-✻BA F ✻Selected dash number for clamp size from Selection & Dimension Table below. Selection & Dimension Table Nominal Clamp Size D a sh No. A Ref. B – .02 C – .03 E – .02 L – .04 N – .03 Weight (lbs.) 7C27-#AA 7C27-#BA 3/8 -6 .375 .42 1.66 1.29 .88 1.29 .0386 .0413 7/16 -7 .438 .42 1.80 1.56 .88 1.29 .0442 .0469 1/2 -8 .500 .42 1.80 1.56 .88 1.29 .0421 .0448 9/16 -9 .562 .42 1.95 1.56 .88 1.29 .0508 .0535 5/8 -10 .625 .42 1.95 1.56 .88 1.29 .0481 .0508 11/16 -11 .688 .42 2.01 1.74 .88 1.29 .0565 .0592 3/4 -12 .750 .42 2.01 1.74 .88 1.29 .0534 .0561 13/16 -13 .812 .46 2.18 1.89 .88 1.30 .0635 .0712 7/8 -14 .875 .46 2.18 1.89 .88 1.30 .0599 .0676 15/16 -15 -16 .938 1.000 .47 .47 2.29 2.29 2.03 2.03 .88 .88 1.30 1.30 .0705 .0665 .0794 .0754 1 1-1/16 -17 1.062 .50 2.46 2.18 .88 1.30 .0796 .0903 1-1/8 -18 1.125 .50 2.46 2.18 .88 1.30 .0751 .0858 1-3/16 -19 1.188 .52 2.57 2.32 .88 1.31 .0828 .0954 1-1/4 -20 1.250 .52 2.57 2.32 .88 1.31 .0778 .0904 1-5/16 -21 1.312 .52 2.71 2.47 .88 1.31 .0946 .1077 1-3/8 -22 1.375 .52 2.71 2.47 .88 1.31 .0892 .1023 F-4 CLAMPS 7C SERIES Stainless Steel Liners. 7C11-4. .08" Nominal Clamp Size. Head Styles: • • • • Stainless Steel Liner Single Hole Mounting Passivated Stainless Steel Temperatures to 750°F. Ordering Information: Head Style Part No. A D i ameter Wei ght (lbs.) Slotted 7C 11-4 .198 .191 .0094 Slotted 7C 11-4A .134 .128 .0094 Wi ng 7C 11-4B .198 .191 .0121 7C41-1AA. .08" Nominal Clamp Size. • • • • Stainless Steel Liner Double Hole Mounting Passivated Stainless Steel Temperatures to 750°F. Head Styles: Slotted Ordering Information: Head Style Slotted F-5 Part No. 7C41-1AA Weight (lbs.) .0087