Datasheet

UNISONIC TECHNOLOGIES CO., LTD
UT3PP
Preliminary
DUAL TRANSISTOR
COMPOSITE TRANSISTORS
UT3PP
DESCRIPTION

As a composite transistor with resistor, the UTC UT3PP is for
switching application.
FEATURES

* Silicon Epitaxial Type
* The Internal Tow Transistor Elements are Independent.
SYMBOL

6
5
4
R1
TR1
TR2
R1
1

2
3
ORDERING INFORMATION
Ordering Number
Package
UT3PPG-AL6-R
Note: Pin Assignment: B: Base C: Collector E: Emittert
SOT-363

1
E1
Pin Assignment
2
3
4
5
6
B1 C2 E2 B2 C1
Packing
Tape Reel
MARKING
www.unisonic.com.tw
Copyright © 2015 Unisonic Technologies Co., Ltd
1 of 3
QW-R218-009.d
UT3PP

Preliminary
DUAL TRANSISTOR
ABSOLUTE MAXIMUM RATINGS (TA=25°С)
PARAMETER
SYMBOL
RATINGS
UNIT
Collector-Base Voltage
VCBO
-50
V
Collector-Emitter Voltage
VCEO
-50
V
Emitter-Base Voltage
VEBO
-6
V
Collector Current
IC
-100
mA
Peak Collector Current
ICM
-200
mA
Collector Power dissipation
PC
125
mW
Junction Temperature
TJ
+150
°С
Storage Temperature
TSTG
−55 ~ +150
°С
Note: Absolute maximum ratings are those values beyond which the device could be permanently damaged.
Absolute maximum ratings are stress ratings only and functional device operation is not implied.

ELECTRICAL CHARACTERISTICS (TA=25°С, unless otherwise specified)
PARAMETER
Collector-Base Breakdown Voltage
Collector-Emitter Saturation Voltage
Collector Cutoff Current
DC Current Transfer Ratio
Transition Frequency
Input Resistance
SYMBOL
BVCBO
VCE(SAT)
ICBO
hFE
fT
R1
UNISONIC TECHNOLOGIES CO., LTD
www.unisonic.com.tw
TEST CONDITIONS
IC=-100µA
IC =-10mA ,IB =-0.5mA
VCB=-50V
VCE=-5V, IC=-1mA
VCE=-6V, IE=10mA
MIN
-50
TYP
MAX UNIT
V
-0.3
V
-0.1
µA
100
0.7
150
1.0
1.3
MHz
kΩ
2 of 3
QW-R218-009.d
UT3PP
Preliminary
DUAL TRANSISTOR
UTC assumes no responsibility for equipment failures that result from using products at values that
exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or
other parameters) listed in products specifications of any and all UTC products described or contained
herein. UTC products are not designed for use in life support appliances, devices or systems where
malfunction of these products can be reasonably expected to result in personal injury. Reproduction in
whole or in part is prohibited without the prior written consent of the copyright owner. The information
presented in this document does not form part of any quotation or contract, is believed to be accurate
and reliable and may be changed without notice.
UNISONIC TECHNOLOGIES CO., LTD
www.unisonic.com.tw
3 of 3
QW-R218-009.d