UNISONIC TECHNOLOGIES CO., LTD U74LVC06A CMOS IC HEX INVERTER BUFFERS/DRIVERS WITH OPEN-DRAIN OUTPUTS DESCRIPTION The U74LVC06A contain six independent inverter buffers/drivers with open drain outputs, and performs the Boolean function Y= A in positive logic. This device has power-down protective circuit preventing destruction of the device when it is powered down. FEATURES * Operate From 1.65V to 3.6V * Inputs and Open-Drain Outputs Accept Voltages to 5.5V * IOFF Supports Partial-Power-Down Mode * Low Power Dissipation ORDERING INFORMATION Ordering Number Lead Free Halogen Free U74LVC06AL-S14-R U74LVC06AG-S14-R U74LVC06AL-S14-T U74LVC06AG-S14-T U74LVC06AL-P14-R U74LVC06AG-P14-R U74LVC06AL-P14-T U74LVC06AG-P14-T www.unisonic.com.tw Copyright © 2012 Unisonic Technologies Co., Ltd Package Packing SOP-14 SOP-14 TSSOP-14 TSSOP-14 Tape Reel Tube Tape Reel Tube 1 of 5 QW-R502-438.C U74LVC06A CMOS IC PIN CONFIGURATION FUNCTION TABLE (Each Inverter) INPUT(A) OUTPUT(Y) H L L H Note: H: HIGH voltage level; L: LOW voltage level. LOGIC DIAGRAM (Each Inverter) Y A Logic Symbol UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw 2 of 5 QW-R502-438.C U74LVC06A CMOS IC ABSOLUTE MAXIMUM RATING PARAMETER SYMBOL RATINGS UNIT Supply Voltage VCC -0.5 ~ +6.5 V Input Voltage VIN -0.5 ~ +6.5 V Output Voltage VOUT -0.5 ~ +6.5 V VCC or GND Current ICC ±100 mA Continuous Output Current (VOUT=0 to VCC) IOUT ±50 mA Input Clamp Current (VIN<0) IIK -50 mA Output Clamp Current (VOUT<0) IOK -50 mA Storage Temperature TSTG -65 ~ +150 °C Note: Absolute maximum ratings are those values beyond which the device could be permanently damaged. Absolute maximum ratings are stress ratings only and functional device operation is not implied. THERMAL DATA PARAMETER Junction to Ambient SYMBOL SOP-14 TSSOP-14 UNIT °C/W °C/W RECOMMENDED OPERATING CONDITIONS PARAMETER SYMBOL Supply Voltage VCC Input Voltage Output Voltage Operating Temperature VIN VOUT TA Low-Level Output Current θJA RATINGS 86 113 IOL TEST CONDITIONS Operating Data retention only MIN 1.65 1.5 0 0 -40 VCC=1.65V VCC=2.3V VCC=2.7V VCC=3V TYP MAX 3.6 5.5 5.5 85 4 8 12 24 UNIT V V V V °C mA mA mA mA ELECTRICAL CHARACTERISTICS (TA =25°C ,unless otherwise specified) PARAMETER SYMBOL High-Level Input Voltage VIH Low-Level Input Voltage VIL Low-Level Output Voltage VOL Input Leakage Current Power OFF Leakage Current Quiescent Supply Current Additional Quiescent Supply Current Per Input Pin Input Capacitance II(LEAK) IOFF IQ ΔIQ CIN TEST CONDITIONS MIN TYP MAX UNIT V VCC=1.65V ~ 1.95V 0.65*VCC VCC=2.3V ~ 2.7V 1.7 V VCC=2.7V ~ 3.6V 2 V V VCC=1.65V ~ 1.95V 0.35*VCC VCC=2.3V ~ 2.7V 0.7 V VCC=2.7V ~ 3.6V 0.8 V IOL=100μA VCC=1.65 ~ 3.6V 0.2 V IOL= 4mA VCC=1.65V 0.45 V IOL= 8mA VCC=2.3V 0.7 V IOL=12mA VCC=2.7V 0.4 V IOL=24mA VCC=3.0V 0.55 V VIN=5.5V or GND, VCC=3.6V ±1 μA VIN or VOUT=5.5V, VCC=0V ±1 μA VIN= VCC or GND, IOUT=0, VCC=3.6V 1 μA VCC=2.7~3.6V,One input at VCC-0.6V, 500 μA IOUT=0, Other inputs at VCC or GND 5 pF VIN= VCC or GND, VCC=3.3V UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw 3 of 5 QW-R502-438.C U74LVC06A SWITCHING CHARACTERISTICS (TA=25°С ,unless otherwise specified) PARAMETER Propagation delay from input (nA) to output(nY) CMOS IC SYMBOL tPLZ / tPZL TEST CONDITIONS VCC=1.8±0.15V, RL=1KΩ CL=30pF VCC=2.5±0.2V, RL=500Ω VCC=2.7V, RL=500Ω CL=50pF VCC=3.3±0.3V, RL=500Ω MIN 1.4 1.0 1.0 1.0 TYP MAX 5.1 2.8 3.7 3.5 UNIT ns ns ns ns MIN TYP 2.1 2.3 2.5 MAX UNIT pF pF pF OPERATING CHARACTERISTICS (TA=25°С) PARAMETER SYMBOL Power Dissipation Capacitance Per Inverter CPD TEST CONDITIONS VCC=1.8±0.15V VCC=2.5±0.2V f=10MHz VCC=3.3±0.3V UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw 4 of 5 QW-R502-438.C U74LVC06A CMOS IC TEST CIRCUIT AND WAVEFORMS INPUTS VCC 1.8V±0.15V 2.5V±0.2V 2.7V 3.3V±0.3V VIN VCC tR, tF ≤2ns VCC 2.7V 2.7V ≤2ns ≤2.5ns ≤2.5ns VM VLOAD VΔ CL RL VCC/2 VCC/2 1.5V 1.5V 2 x VCC 2 x VCC 6V 6V 0.15V 0.15V 0.3V 0.3V 30pF 30pF 50pF 50pF 1KΩ 500Ω 500Ω 500Ω Note: CL includes probe and jig capacitance. All input pulses are supplied by generators having the following characteristics: PRR ≤10MHz, Zo = 50Ω. UTC assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all UTC products described or contained herein. UTC products are not designed for use in life support appliances, devices or systems where malfunction of these products can be reasonably expected to result in personal injury. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. The information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed without notice. UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw 5 of 5 QW-R502-438.C