UNISONIC TECHNOLOGIES CO., LTD PUMX1 DUAL TRANSISTOR NPN GENERAL PURPOSE DUAL TRANSISTOR DESCRIPTION Two independently operating NPN transistors. FEATURES * Low current (max.100mA) * Low voltage (max.40V) * Reduces number of components and board space. * Complement to PUMT1. APPLICATIONS * General purpose switching and amplification. SYMBOL ORDERING INFORMATION Ordering Number Lead Free Halogen-Free PUMX1L-AL6-R PUMX1G-AL6-R Package SOT-363 1 E1 Pin Assignment 2 3 4 5 B1 C2 E2 B2 6 C1 Packing Tape Reel MARKING www.unisonic.com.tw Copyright © 2012 Unisonic Technologies Co., Ltd 1 of 3 QW-R218-002.C PUMX1 DUAL TRANSISTOR ABSOLUTE MAXIMUM RATINGS (Ta=25°С, unless otherwise specified) PARAMETER SYMBOL RATINGS UNIT Collector-Base Voltage VCBO 50 V Collector-Emitter Voltage VCEO 40 V Emitter-Base Voltage VEBO 5 V Collector Current (DC) IC 100 mA Peak Collector Current ICM 200 mA Peak Base Current IBM 200 mA Collector Power Dissipation PC 200 mW Junction Temperature TJ 150 °С Storage Temperature TSTG -55~+150 °С Note: Absolute maximum ratings are those values beyond which the device could be permanently damaged. Absolute maximum ratings are stress ratings only and functional device operation is not implied. ELECTRICAL CHARACTERISTICS (Ta=25°С, unless otherwise specified) PARAMETER SYMBOL Collector-Emitter Saturation VCE(SAT) Voltage (Note) Collector Cutoff Current ICBO Emitter Cutoff Current IEBO DC Current Transfer Ratio hFE Transition Frequency fT Collector capacitance CC Note: Pulse test: tp≦300μs, δ≦0.02 TEST CONDITIONS MIN TYP MAX UNIT IC=50mA, IB=5mA 200 mV IE=0, VCB=30V VEB=4V, IC=0 IC=1mA, VCE=6V IC=2mA, VCE=12V, f=100MHz IE=IE=0, VCB=12V, f=1MHz 100 100 nA nA 1.5 MHz pF UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw 120 100 2 of 3 QW-R218-002.C PUMX1 DUAL TRANSISTOR UTC assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all UTC products described or contained herein. UTC products are not designed for use in life support appliances, devices or systems where malfunction of these products can be reasonably expected to result in personal injury. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. The information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed without notice. UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw 3 of 3 QW-R218-002.C