Technical Information No. DO 4319 Edition: 10/08- Metal Halide Lamp HMI® 200 W/SE subject to change Supersedes: Edition 08/04 Status: valid Product description The OSRAM HMI® 200 W/SE is a metal halide lamp with outer jacket. The single-ended lamp is characterized by its compact dimensions performing in the low wattage segment. The HMI® 200 W/SE is mainly used in accent lighting in photo and TV studio as well as for electronic news gathering (ENG). d Technical data HMI® 200 W/SE Order reference Rated lamp wattage W 200 Rated lamp voltage V 70 ± 10 Rated lamp current (square wave) A 3.3 Ignition voltage (cold, kHz ign.) kVS 4 Ignition voltage (cold/hot, MHz-ign.) kVS 6 / 20 (max. 25) Luminous flux lm 6,000 Luminous efficacy lm/W 75 Color temperature K 6,000 Color rendering index Ra > 90 Electrode gap e mm 5 Lamp length (overall) l1 mm max. 80 Bulb diameter d mm max. 20 (12,5) LCL a mm 39 Average service life h 200 Base l1 a GZY 9.5 Lamp operation Maximum pinch seal temperature allowed °C 350 Cooling Convection Burning position any The HMI® 200 W/SE can either be operated on standard ballasts or on electronic power supplies (ECG). Manufacturers of igniters and control gear (not all officially approved by OSRAM) Ignitors: Ballasts: ECGs: I.R.E.M. AD-825; Mitronic ZGV 125-F2; Walker SA-200-i1; Bauch 252; Gossen ZG 0, ZG 1, Hansmann ER 200-17 and ERF 200-17-L ERC 686823; I.R.E.M. BC-200; LTM 506500; Lumo 510-050; May & Christe 1103.0566.036; Mitronic VG 200 DE SISTI DEB 200; Gossen C 39, AC 200; Kobold NE 200N; Lightmaker T.L. 200; ARRI 200 EB; Mitronic PE 400-20; Panther FLIB 200; RDS MT-200 DC; Walker HMI 200; Schiederwerk EVG 2-20 Further information on operating and control gears requirements is available with the OSRAM brochure "Guidelines for Control Gear and Igniters - Metal Halide Lamps Photo Optics", order reference 123T01E. Display/Optic Berlin