Technical Information No. DO 4394 Edition: 10/08 - Metal Halide Lamp HMI® 2500 W/SE XS subject to change Supersedes: Edition 08/04 Status: valid Product description The OSRAM HMI® 2500 W/SE is a single-ended metal halide lamp with outer jacket. Featuring OSRAM's eXtreme-Seal Technology, the lamp stands pinch temperatures up to 450°C now. This lamp type is mainly used in film and TV lighting, for stage, show and industrial solar simulation. d Technical data HMI® 2500 W/SE XS Order reference Rated lamp wattage W 2500 Rated lamp voltage V 115 ± 10 Rated lamp current (~) A 25,6 Ignition voltage (cold, kHz-ign.) kVS 5 Ignition voltage (cold / hot, MHz-ign.) kVS 20 / 45 (max. 55) Luminous flux lm 240,000 Luminous efficacy lm/ 96 Color temperature K 6,000 Color rendering index Ra > 90 Electrode gap e mm 14 Lamp length (overall) l1 mm max. 225 Bulb diameter d mm max. 60 LCL a mm 127 Average service life h 500 Base l1 a G 38 Lamp operation Maximum pinch seal temperature allowed °C 450 / with eXtreme Seal Technology (measured at welding point) Cooling Convection Burning position any The HMI® 2500 W/SE can either be operated on standard ballasts or on electronic power supplies (ECG). Manufacturers of igniters and control gear (not all officially approved by OSRAM) Ignitors: Ballasts: ECGs: I.R.E.M. AD-3050, sAD-3050; Mitronic ZG 2500; Bauch 905, 912 ARRI 2500 CB, 2500 CB DMX; I.R.E.M. BC-2500; LTM 502501; Lumo 510-053; May & Christe 1105.0815.001, 1105.2305.003; Mitronic VG 2500; Panther FL 2500, ST 2500; RDS BC-2500; Strand 65 208 220 ERC 686290/2 (2 units in parallel) ARRI 2500 EBB, 2.5/4kW EB, 2.5/4kW EB DMX; B&S EB 2500C; DE SISTI EB 2500C; ERC DEB 2500; I.R.E.M. EB-2500, sEB-2500; LTM A 522; Lumo Super 2.5; RDS EB-2500; Sansha SG-2500; Strand 65 208 760 Further information on operating and control gears requirements is available with the OSRAM brochure "Guidelines for Control Gear and Igniters - Metal Halide Lamps Photo Optic", order reference 123T01E. Display/Optic Berlin