FarReach™ Drill Pipe 5” SPECIFICATIONS Drill Pipe Dimensions and Materials Pipe Body New Premium OD (in) 5.150 4.940 Wall Thickness (in) 0.525 0.420 Wear Band Diameter (in) 5.150 Remaining Body Wall (%) 100.0% 80.0% Reduction in OD (%) 0.00% 4.1% ID (in) 4.100 4.100 Alloy / Temper 2014-T6 Yield Strength (ksi) 58 Modulus (msi) 10.6 Cross Sectional Area (in^2) 7.628 5.964 Tool Joint 5-1/2FH Connection New Premium OD (in) 7.000 6 13/32 ID (in) 4.094 4.094 Box Tong Length, Lb (in) 11.031 Pin Tong Length, Lp (in) 6.781 Yield Strength (ksi) 120 Drill Pipe Assembly Data Open Displacement Shoulder to Shoulder Length (ft) 30.00 (US gal/ft) Closed Displacement Approximate Weight (lb) 409 (US gal/ft) Adjusted Weight (lb/ft) 13.64 Capacity (US gal/ft) Drill Pipe Mechanical Performance Pipe Body New Premium Tensile Strength (lbf) 442,000 346,000 Torsional Strength (ft-lbf) 44,700 34,700 80% Torsional Strength (ft-lbf) 35,800 27,800 Collapse Pressure (psi) 10,700 8,180 Internal Yield Pressure (psi) 10,300 9,860 Tool Joint New Premium Tensile Strength (lbf) 1,190,000 852,000 Torsional Strength (ft-lbf) 52,400 27,800 Recommended Make-Up Torque (ft-lbf) 31,400 16,700 Balanced OD (in) 6.83 6.83 Torsional Ratio TJ/Pipe 1.17 0.800 Class 2 4.835 0.367 70.0% 6.1% 4.100 5.158 Class 2 6 11/32 4.094 0.49 1.19 0.71 Class 2 299,000 29,900 23,900 6,740 8,820 Class 2 766,000 23,900 14,300 6.83 0.800 TheFarReach™ values used are same as in the brochure This lightweight, high-strength combination allows Alcoa Drillthe Pipe delivers theprivious industry’s DRAFT highest strength-to-weight ratio, improved hydraulic for drilling to much greater depths and distances performance, optimized wear characteristics and a with existing drilling equipment. Find out more high level of corrosion resistance. about FarReach™ and how it can help your FarReach™ Drill Pipe enables extending the reach of your operation in deepwater, horizontal drilling and operation go farther, starting today. other Extended Reach Drilling (ERD) applications. Drill Pipe Mechanical Performance Notes: (1) Tensile strength based on minimum yield strength. (2) Torsional strength based on shear strength equal to 57.7% of minimum yield strength. (3) Collapse pressure calculated per ISO/DIS 20312. (4) Internal yield pressure calculated per API Bullentin 5C3 which includes a 12.5% knockdown for new pipe. (5) Performance calculated with frictional factor and safety factor of 1.0. (6) All data based on nominal dimensions and calculated per standard methods unless otherwise noted. (7) Pipe properties base on pipe dimensions (non-upset area). (8) These data areon intended for a preliminary of thishigh configuration. more information how Alcoa can helpevaluation you leverage strength-to-weight For aluminum alloy technology, visit AlcoaOilandGas.com. Report Number: 20130813-124 Revision: 0.0 Revision Date: 13-AUG-2013 © 2013 Alcoa Oil & Gas. All rights reserved. AO1153 1013