FarReachâ„¢ Drill Pipe Performance Sheet 5-1/2 for AOG Brochure Revision: 1.0 13-AUG-2013 Drill Pipe Dimensions and Materials OD (in) Wall Thickness (in) Wear Band Diameter (in) Remaining Body Wall (%) Reduction in OD (%) ID (in) Alloy / Temper Yield Strength (ksi) Modulus (msi) Cross Sectional Area (in^2) New 5.680 0.500 5.680 100.0% 0.0% 4.680 8.137 Connection OD (in) ID (in) Box Tong Length, Lb (in) Pin Tong Length, Lp (in) Yield Strength (ksi) Shoulder to Shoulder Length (ft) Approximate Weight (lb) Adjusted Weight (lb/ft) New 7.375 4.680 Pipe Body Premium 5.480 0.400 80.0% 3.5% 4.680 2014-T6 58.0 10.6 6.384 Tool Joint 5-1/2IF Premium 6 31/32 4.680 11.688 7.688 120 Drill Pipe Assembly Data 30.00 Open Displacement (US gal/ft) 435 Closed Displacement (US gal/ft) 14.50 Capacity (US gal/ft) Class 2 5.380 0.350 70.0% 5.3% 4.680 5.531 Class 2 6 29/32 4.680 0.52 1.44 0.93 Drill Pipe Mechanical Performance Tensile Strength (lbf) Torsional Strength (ft-lbf) 80% Torsional Strength (ft-lbf) Collapse Pressure (psi) Internal Yield Pressure (psi) Tensile Strength (lbf) Torsional Strength (ft-lbf) Recommended Make-Up Torque (ft-lbf) New 472,000 54,100 43,300 8,640 8,930 Pipe Body Premium 370,000 42,200 33,700 6,250 8,470 Class 2 321,000 36,400 29,200 4,950 7,550 New 1,390,000 62,300 37,400 Tool Joint Premium 881,000 33,700 20,200 Class 2 787,000 29,200 17,500 7.44 0.800 7.44 0.800 Balanced OD (in) 7.44 Torsional Ratio TJ/Pipe 1.15 Report Number: 20140620-144 Revision: 1.0 Revision Date: 13-AUG-2013 This is to check the perforamance sheet on the AOG Brochure Drill Pipe Mechanical Performance Notes: (1) Tensile strength based on minimum yield strength. (2) Torsional strength based on shear strength equal to 57.7% of minimum yield strength. (3) Collapse pressure calculated per ISO/DIS 20312. (4) Internal yield pressure calculated per API Bullentin 5C3 which includes a 12.5% knockdown for new pipe. (5) Performance calculated with frictional factor and safety factor of 1.0. (6) All data based on nominal dimensions and calculated per standard methods unless otherwise noted. (7) Pipe properties base on pipe dimensions (non-upset area). (8) These data are intended for a preliminary evaluation of this configuration. Report Number: 20140620-144 Revision: 1.0 Revision Date: 13-AUG-2013