Product Group: Vishay Dale, Resistors / August 2015 Author: Ray Lehman Tel: +1-402-563-6332 E-mail: [email protected] New Non-Magnetic Versions of Vishay Dale Resistors Vishay Dale has introduced new solderable non-magnetic versions of its CMF industrial metal film resistors and industrial RCWP, high-voltage CDHV and CRHV, medium-voltage CRMV, alternatetermination RC, and high-resistance RCHR thick film chip resistors and dividers. Offering a wide range of resistance values and tight tolerances, the devices are intended for use in medical, high-end audio, or any other application that requires a non-magnetic product. Device Specification Table: Series Resistance (Ω) Best available tolerance (%) Best available temperature coefficient (ppm/°C) Power rating (W) Max. working voltage (V) Temperature range (°C) CMF RCWP CDHV 20 M to 20 G CRHV 2 M to 50 G CRMV 150 to 75 M RC 10 to 10 M RCHR 500 k to 3 G 0.1 to 50 M 1 to 22 M ± 0.1 ± 0.5 ± 0.1 ± 0.5 ± 0.5 ±1 ±5 ± 25 ± 100 ± 100 ± 100 ± 150 ± 100 ± 500 0.125 to 1.75 0.04 to 1 Contact factory 0.3 to 1 0.25 to 0.5 01 to 0.575 Contact factory 200 to 500 15 to 200 3000 1500 to 3000 300 to 800 40 to 200 175 to 300 -55 to +175 -55 to +155 -55 to +155 -55 to +155 -55 to +155 -55 to +155 -55 to +155 Contact Information: Americas Ray Lehman Phone: +1-402-563-6332 Fax: +1-402-563-6565 [email protected] Europe Uwe Konrad Phone: +49-9287-712-750 Fax: +49-9287-712-496 [email protected] Asia Victor Goh Phone: +65-6788-6668 Fax: +65-6788-3383 [email protected]