V ish ay I n t e r t e ch n o l o g y, I n c . I INNOVAT AND TEC O L OGY CDHV N HN THICK FILM RESISTOR O 19 62-2012 Resistors - High-Voltage to 3000 V Thick Film Chip Dividers, High Voltage Key Benefits • • • • High-voltage capability to 3000 Volts Small physical size (2512 case size) Outstanding ratio stability: < 0.3 % at 70 ºC at 2000 hours, full power Standard and custom ratio values covering multiple ratio dividers: 10:1 to 500:1 APPLICATIONS • • • • High-voltage power supplies Inverters Regulators High-voltage control circuits Resources • Datasheet: CDHV - http://www.vishay.com/doc?68020 • For technical questions contact [email protected] One of the World’s Largest Manufacturers of Discrete Semiconductors and Passive Components PRODUCT SHEET 1/2 VMN-PT9175-1201 This document is subject to change without notice. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 V ish ay I n t e r t e ch n o l o g y, I n c . AND TEC I INNOVAT O L OGY CDHV N HN THICK FILM RESISTOR O 19 62-2012 CDHV www.vishay.com Vishay Techno Thick Film HighVoltage Voltage Thick FilmChip ChipDividers, Dividers, High FEATURES Resistors - High-Voltage to 3000 V • • • • • • • • • • • High voltage up to 3000 V Typical resistance ratios of 250:1, 500:1, etc. Flow solderable Tape and reel packaging available Available with either wraparound terminations or as a single termination flip chip Suitable for solderable, epoxy bondable, or wire bondable applications Termination: Gold, palladium silver, platinum gold, platinum silver, platinum palladium gold or solder-coated nickel barrier available Multiple styles, termination materials and configurations, allow wide design flexibility Non-magnetic terminations available Compliant to RoHS Directive 2011/65/EU Halogen-free according to IEC 61249-2-21 definition Note * Pb containing terminations are not RoHS compliant, exemptions may apply STANDARD ELECTRICAL SPECIFICATIONS GLOBAL MODEL CASE SIZE MAXIMUM WORKING VOLTAGE (1) V 3000 POWER RATING P70 °C W TEMPERATURE TOLERANCE (3) COEFFICIENT (4) TCR TRACKING ±% (- 55 °C to + 150 °C) ± ppm/°C ± ppm/°C 1, 2, 5, 10, 20 100 50 (typical) RESISTANCE RANGE (2) CDHV 2512 2512 Contact factory 20M to 20G Notes (1) Continuous working voltage shall be P x R or maximum working voltage, whichever is less. (2) Resistance values are calibrated at 100 V . Calibration at other voltages available upon request. Contact factory for lower values. DC (3) Contact factory for tighter tolerances. (4) Reference only: Not for all values specified. Consult factory for your value. VOLTAGE AND TEMPERATURE COEFFICIENTS OF RESISTANCE CHART TYPICAL RESISTANCE () 20M 150M 800M Note • Contact factory for other ratios. RATIO (TYPICAL) 250:1 300:1 500:1 VCR (ppm/V) 10 10 10 TCR (ppm/°C) - 55 °C to + 150 °C 100 150 200 GLOBAL PART NUMBER INFORMATION New Global Part Numbering: CDHVAF20M0J2500GFB (preferred part number format) C GLOBAL MODEL D H TERM STYLE A F TERM MATERIAL CDHV = A = 3-sided CDHV2512 B = Top only Revision 23-Nov-11 V 2 0 RESISTANCE VALUE (R1) F = Nickel barrier M = M A = Palladium silver G = G B = Platinum gold 20M0 = 20 M C = Gold 800M = 800 M 1G00 = 1 G D = Platinum silver E = Platinum palladium gold M 0 J 5 0 0 RATIO R1/R2 RATIO TOLERANCE 3 digit significant figure, followed by a multiplier 2500 = 250:1 3000 = 300:1 5000 = 500:1 G=±2% H=±3% J=±5% TOLERANCE F=±1% G=±2% J=±5% K = ± 10 % M = ± 20 % 2 G F SOLDER TERMINATION B PACKAGING D = Sn95/Ag5, B = Bulk HSD F = T/R E = Sn100 (full reel) F = Sn95/Ag5 1 = T/R N = No solder (1000 pcs) S= 5 = T/R Sn62/Pb36/Ag2, (500 pcs) HSD T = T/R T = Sn90/Pb10 (250 pcs min.) W = Waffle Historical Part Numbering: CDHV2512AF2005J2500Ge2 (will continue to be accepted) CDHV2512 A F 2005 J 2500 G e2 HISTORICAL MODEL TERM STYLE TERM MATERIAL RESISTANCE VALUE (R1) TOLERANCE RATIO R1/R2 RATIO TOLERANCE SOLDER TERMINATION Revision: 23-Nov-11 Document Number: 68020 1 For technical questions, contact: [email protected] PRODUCT SHEET 2/2 VMN-PT9175-1201 THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 This document is subject to change without notice. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000