SR1040 THRU SR10200 SPECIFICATION Rev. A 10A SCHOTTKY BARRIER RECTIFIERS PRODUCT FEATURES 1. 2. 3. 4. 5. 6. 7. 8. 9. 10 FLAMMABILITY CLASSIFICATION 94V-0 EXTREMELY LOW VF LOW STORED CHARGE MAJORITY CARRIER CONDUCTION LOW POWER LOSS/HIGH EFFICIENCY CASE: TRANSFER MOLDED, DO-201AD DIMENSIONS IN INCHES AND (MILLIMETERS) LEADS: SOLDERABILITY PER MIL-STD-202 METHOD 208 WEIGHT: 1.2 GRAMS RoHS COMPLIANT AND HALOGEN FREE ELECTRICAL CHARACTERISTICS MAXIMUM RATINGS (TA =25°C UNLESS OTHERWISE NOTED ) AND ELECTRICAL CHARACTERISTICS RATING SYMBOL IO MAXIMUM AVERAGE FORWARD RECTIFIED CURRENT, SEE FIG.1 10 V A n PEAK FORWARD SURGE CURRENT, 8.3ms SINGLE HALF IFSM L 180 SINE-WAVE SUPERIMPOSED ON RATED LOAD U CJ TYPICAL JUNCTION CAPACITANCE (NOTE 1) 200 E RθjA TYPICAL THERMAL RESISTANCE (NOTE 2) 25 STORAGE TEMPERATURE RANGE TSTG - 55 TO +175 TOP OPERATING TEMPERATURE RANGE - 55 TO +150 MAXIMUM REVERSE CURRENT AT 25°C IR 0.5 MAXIMUM REVERSE CURRENT AT 100°C IR 50 PART NUMBER SR1040 SR1060 SR10100 SR10150 SR10200 MAX RECURRENT PK REVERSE VOLTAGE/DC BLOCKING VRRM/VR (V) 40 60 100 150 200 MAX VRMS (V) 28 42 70 105 140 UNITS A A pF °C/W °C °C mA mA MAXIMUM FORWARD VOLTAGE @ IO DC, VF(V) 0.55 0.70 0.85 0.90 0.92 NOTE︰ 1. MEASURED AT 1MHz WITH APPLIED REVERSE VOLTAGE OF 4V. . 2. BOTH LEADS ATTACHED TO HEAT SINK 20x20x1T (mm) COPPER PLATE AT LEAD LENGTH 5mm. 3. CURRENT RATING IS BASED ON SINGLE PHASE, 1/2 WAVE, 60HZ, RESISTIVE, OR INDUCTIVE LOAD. FOR CAPACITIVE LOAD, DERATE CURRENT BY 20%. Frontier Electronics Corp.® http://www.frontierusa.com Page 1 of 2 667 E. Cochran St., Simi Valley, CA 93065 Phone: 1-805-522-9998, Fax: 1-805-522-9989 SR1040 THRU SR10200 SPECIFICATION Rev. A RATINGS AND CHARACTERISTIC CURVES Frontier Electronics Corp.® http://www.frontierusa.com Page 2 of 2 667 E. Cochran St., Simi Valley, CA 93065 Phone: 1-805-522-9998, Fax: 1-805-522-9989