Dual Schottky Barrier Rectifiers SR10150-G Thru. SR10200-G Forward current: 10A Reverse voltage: 150 to 200V RoHS Device ITO-220AB 0.189(4.80)max 0.404(10.27) 0.383( 9.72) Features ψ0.134(3.4) -Extremely Low VF 0.272(6.90) 0.248(6.30) -Low Stored Charge, Majority Carrier Conduction 0.122(3.10)max 0.610(15.50) 0.571(14.50) -Low Power Loss / High Efficiency -UL 94V0 Flame Retardant Epoxy Molding Compound 1 2 3 -Lead Free 0.161(4.10)max Mechanical data 0.543(13.80) 0.512(13.00) 0.060(1.52)MAX -Case: Transfer Molded 0.031(0.80)MAX -Leads: Solderable per MIL-STD-202, method 208 0.035(0.90)MAX 0.105(2.67) 0.095(2.41) 0.114(2.90) 0.098(2.50) -Polarity: As Marked PIN 1 PIN 2 CASE -Weight: 2.05 grams PIN 3 Dimensions in inches and (millimeter) Maximum Ratings and Electrical Characteristics Ratings at 25°C ambient temperature unless otherwise specified. Single phase, half wave, 60Hz, resistive or inductive load. For capacitive load derate current by 20%. Symbol SR10150-G SR10200-G Unit Maximum Recurrent Peak Reverse Voltage VRRM 150 200 V Maximum RMS Voltage VRWS 105 140 V VDC 150 200 V Ratings Maximum DC Blocking Voltage 10.0 Maximum Average Forward Rectified Current See Fig.1 Per Leg IO Peak Forward Surge Current, 8.3ms Single Half Sine-Wave Superimposed On Rated Load (JEDEC Method) IFSM 120 A Top,TSTG -55 to +150 °C Operating Temperature Range And Storage Temperature Range A 5.0 Electrical Characteristics (At Ta=25°C, unless otherwise noted) Characteristics Symbol SR10150-G SR10200-G Unit Maximum Forward Voltage At 5A Per Leg VF 0.95 V Maximum Reverse Current At 25°C Per Leg (Note 1 ) IR 500 uA Maximum Reverse Current At 125°C Per Leg (Note 1 ) IR 10 mA Thermal Characteristics (At Ta=25°C, unless otherwise noted) Parameter Typical Thermal Tesistance Junction to Case Per Leg Symbol SR10150-G RθJC NOTES : 1.Pulse Test : 300μS Pulse Width ,1% Duty Cycle QW-BB031 SR10200-G 4.0 Units °C/W REV:A Page 1 Comchip Technology CO., LTD. Dual Schottky Barrier Rectifiers RATING AND CHARACTERISTIC CURVES (SR10150-G Thru. SR10200-G) Fig.2 Maximum Non-Repetitive Surge Current Fig.1 Forward Current Derating Curve 120 Peak Forward Surge Current, (A) Average Forward Current, (A) 12.5 10 7.5 5.0 2.5 0 TL=75°C 8.3ms SINGLE HALF SINE-WAVE JEDEC METHOD 100 80 60 40 20 0 0 50 150 100 1 5 O Case Temperature, ( C) 100 Number of Cycles at 60Hz Fig.3 Typical Reverse Characteristics Fig.4 Typical Instantaneous Forward Characteristics 100 50 Instantaneous Forward Current, (A) Instantaneous Reverse Current, (mA) 10 10 TJ=100°C 1.0 TJ=75°C 0.1 TJ=25°C 0.01 0 10 1.0 TJ=25°C Pulse Width=300us 2% Duty cycle 0.1 20 40 60 80 100 120 140 0.2 0.3 Peraent or Rated Voltage Peak Reverse Voltage, (V) 0.4 0.5 0.6 0.7 0.8 0.9 1.0 Instantaneous Forward Voltage, (V) REV:A Page 2 QW-BB031 Comchip Technology CO., LTD.