pdf

www.osram.com
PARATHOM® CLASSIC P25 ADVANCED
FROSTED

Replacement for 25W incandescent lamp

Dimension comparable Classic P incandescent

High quality of light with CRI 80

Good thermal management
Product Offering
Power
Classic P25 adv
frosted E14
Classic P25 adv
frosted E27
4,5W
2700K
250
80
4,5W
2700K
250
80
1. Key Features and Benefits
• 4,5W LED lamp as high-quality replacement of 25W incandescent lamp
• E14 and E27 base
• Dimmable1
• 2700K warm white
• reduces energy consumption up to 80%
• shock-proof and vibration-proof
• 25,000 hours lifetime
• UV and NIR radiation free
• Mercury free
• 4 years Osram Guarantee2
1
2
See www.osram.com/dim
See www.osram.com/guarantee
GL MK, Edition April 2012
subject to alteration
1
CCT
Luminous
flux
Type reference
CRI
2. Common Characteristics
Average
Luminous
lifetime4
Flux
25,000h
250lm
Mercury
max.
Base Type
0.0mg
E14/E27
Switching cycles
Casing material
Starting time
(30s on, 30s off)
100.000
Length
79mm/
76,5 mm
Plastic
Diameter
45mm
<1s
Weight
78g/82g
Tc temperature
max.5
78°C
Warm up time
for 60% light
none
Nominal current
(steady state)
42mA
Power factor
0.45
Max. current
(steady state)
120 mA
3. Mounting information
Good heat exchange supports ideal performance
4
The average lifetime of LED lamps is defined as the number of hours when the light output of 50% of a large group of identical lamps goes below 70% of
its initial luminous flux (L70B50, IEC60969).The lifetime is estimated at room temperature (25°C), free air burning, base up burning position and at rated
voltage. To achieve a full lifetime a good heat exchange for the electronic components is required.
5
The Tc is defined as the highest permissible temperature which may occur on the outer surface of the LED lamp (in the indicated position) under normal
operating conditions and at the rated voltage/current/power or the maximum of the rated voltage/current/power range (DIN EN 62031: 2009-01)
4. Disposal information
WEEE-lamps can be returned at specific collection
points.
LED lamps have to be disposed as special waste.
GL MK, Edition April 2012
subject to alteration
2
5. Application Information
Applications

hotels

restaurant

commercial areas

residentials

art galleries and museum

office space
Application Notes
1. suitable for indoor application.
2. for outdoor applications and operation in damp
locations special approved fixture are
required.
3. Input voltage: 220-240V
4. Operating temperature range between -20°C
and 40°C
5. Storage temperature & humidity conditions
-20°C up to +40°C
95% relative humidity
6. Working temperature & humidity conditions
-20°C up to +40°C
95% relative humidity
6. Cost savings: example
Reference product
description
Similar incandescent
product
CLASSIC P25 adv frosted
CLASSIC P25
Watts saved
20,5W
Cost saved
after 1 year
Cost saved
after 2 years
9,01€
Cost saved
after 3 years
37,19€
68,15€
Based on the assumption of 12hours/day on and an energy cost of 0.19€/kWh
7. Ordering Guide
Type reference
CLASSIC P25 adv
frosted E14
CLASSIC P25 adv
frosted E27
Product Number – 1pcs
Product Number – 1 shipping unit
Number of pcs / ship. unit
4008321994172
4008321994189
10
4008321994073
4008321994080
10
8. Lamp conformity
2004/108/EC Electromagnetic compatibility (EMC)
2009/125/EC Ecodesign requirements for energy related products
2011/65/EC Restriction of the use of certain hazardous substances in electrical and electronic equipment (RoHS)
1907/2006 Registration, Evaluation, Authorisation and Restriction of Chemicals (REACH Regulation)
2002/96/EC Waste Electrical and Electronic Equipment Directive (WEEE)
EN 62471 Photobiological safety of lamps and lamp systems
IEC/TR 62471-2 Photobiological safety of lamps and lamp systems - Part 2: Guidance on manufacturing requirements relating to
non-laser optical radiation safety
EN 55015 Limits and methods of measurement of radio disturance
EN 61000-3-2 Electromagnetic compatibility – Limits for harmonic current emission
EN 61000-3-3 Electromagnetic compatibility – Limitation of voltage changes, voltage fluactuations, flicker in public low voltage
supply systems
EN61547 Electromagnetic compatibility immunity requirements
Status: April 2012
GL MK, Edition April 2012
subject to alteration
3
9. Dimming behaviours 6
Legend
L / leading edge
T / trailing edge
Dimming behaviour
Dimmer info Number
of lamp
under test:
1/2/4/6/10
Brand
Duwi
Busch
GIRA
Lichtregler
Merten
Jung
Lichtregler
DUWI
DEHA
PEHA
GIRA
BUSCH
PEHA
Model
14485
6591 U-101
030700/I02
T46S
SBD315RC
225 NV DE
T38S
H1-53845
208013
207913
030700/01
6513 U-102
433 HAB
Note
Dimming range (%)
Type
Min
Max
T
9
100
T
5
100
T
5
100
T
6
100
T
7
100
L
0
100
L
3
100
L
2
100
L
0
100
L
0
100
T
5
100
T
5
100
T
6
100
6
Typical values. Test performed exemplary on PARATHOM CLASSIC P25 adv frosted
The test results reflect the measurement of the individual devices that were used in tests. OSRAM does not take over any responsibility, warranty or liability that
this results can also be achieved by using the devices under other conditions or when using successor models of the tested devices or different models of the
same manufacturer.
The test results were achieved by using the above mentioned LED-lamp types. OSRAM does not take over any responsibility, warranty or liability that this results
can also be achieved by using the devices under other conditions or when using other LED-lamp types.
Status April 2012
GL MK, Edition April 2012
subject to alteration
4